Setting Up Your Studio Display

Connect the power adapter cord into the power adapter socket in the rear of the Switch; now plug the adapter into a power source (wall jack or power strip).. Power down all

y Make sure to turn the power off and disconnect the power cord and all other cables first. y When the TV is left unattended and unused for a long time, disconnect the power cord

COMPOSITE CABLE CONNECTION Power Coax Electrical Outlet TV Cable Wall Outlet Power Output Cable In/RF In Input Component Video/Composite Audio Cables. XFINITY Set-Top Box (Back)

Connect serial cables between the expander card and internal disk drive, as required. Close your computer cabinet, reconnect the power cord and network cables, then power up

> The fire relief PSV size was calculated using Xodus standard gas PSV spreadsheet to find the required PSV orifice size for the water case (Attachment 5) and the oil

[r]

To connect your wired modem, locate the following items from your Easy Connect Kit: your modem’s power cord, the Ethernet cable and one of two coaxial cables.. If you will be

1) Check to see if all the connectors are connected well, including the telephone line, Ethernet cables and power adapter. 2) Consult your ISP and make sure all