• No results found

Effect of strain rate on bake hardening response of BH220 steel

N/A
N/A
Protected

Academic year: 2020

Share "Effect of strain rate on bake hardening response of BH220 steel"

Copied!
5
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 4. Engineering stress-strain curves obtained after pre-straining and pre-strain with baking at 3 different strain rates.
Figure 9. Variation of strain rate sensitivity with strain rate foras-received and bake hardened condition.
Figure 11. Experimental and predicted yield stress values of bakehardened condition at various pre-strain and strain rate.

References

Related documents

As described in the previous chapter, the energy efficiency is calculated by equation 37. In this study, the mass of the catalyst in the reactor is 72,4g. The higher heating value

Table 14: Fetal condition at time of presentation to hospital in patients within the PPIP category of Intrauterine Growth Restriction compared with the rest of the patients in

The impedance matching of the simple fractal design (i.e., A-3) is similar like annular monopole antenna but the modified apollonian design has better return loss and

Greenpeace campaigns to prevent dangerous climate change by phasing out fossil fuels and replacing them with clean renewable energy sources such as solar, wind, geothermal, biomass

Screening of cytotoxic activities using WiDr and Vero cell lines of ethyl acetate extracts of fungi-derived from the marine sponge

Response surface methodology was employed to describe the effects of cooking time and leaf quantity on iron, folic acid and phytate contents of sweet potato leaves

(2) Determine the number of students in grades six through twelve (excluding students enrolled in self-contained special education classes) enrolled in math,

As you upload tool results to create analysis runs, Code Dx will show the corresponding rules for those tools in the Rules Configuration page.. Rules are organized in a hierarchy