HD-SDI Integrated Camera

(1)

HD-SDI Integrated

Camera

User Manual

V1.0

Please read the user manual before using the device and keep it for future reference

(2)

(3)

Safety Notes

 Before installing the device, please read this manual carefully and follow instructions indicated to ensure proper operation. Please keep this manual for future reference.

 Please powering on the device, please check the input power voltage carefully, the camera accepts DC12V, otherwise, it may cause damage to the camera.

 Please put power, video and control cables at safe place in order not to cause malfunction to the device.

 Please put the device into use at required working temperature and humidity, working

condition of the device is 0℃~+40℃，humidity at＜90﹪. Please avoid to have unrelated

objects get into the device like corrosive liquid that may cause damage / danger.  Please avoid shock, vibration, soaking may cause to the device when transporting and

installing, otherwise, it may cause damage to the camera.

 Please only refer to authorized personnel to repair the device, do not disassemble the camera by yourself.

 Only use shielded control and video cables, and the cables should be connected separately in order to ensure proper use. Do not aim the camera lens at sunlight or strong lights that may cause damage to the imaging system of the device.

 Please use soft cloth to clean the device, do not use strong or abrasive detergent to clean that will damage the device’s housing / lens.

(4)

(5)



ABOUT THE PRODUCT

Features

 2.14MP, 1/2.8”CMOS sensor;  Various HD video formats;  3G-SDI output;

 OSD menu;  Up to 72.5° FOV;

 12X/20X optical zoom, 12x digital zoom;  5 buttons at back panel for easy

configuration;

 RS485 & RS232 control interface.  Image flip.

Packing List

When you open the package, please make sure below items are included. In case of any items missing, please contact your supplier.

Camera (1)

Power Adapter (1)

Wall Mount Bracket (1)

(8)

Main Parts and Interfaces

Camera

Front View

1 Camera Lens

Rear View

2 Operation button 3 Communication Indicator 4 3G-SDI Interface 5 RS 485 Control Interface 6 RS 232 Control Interface

7 Power Interface（DC12V）

Side View

8 Installation Hole

(9)

Cable Connection

Connect the camera to relative devices with cables supplied with the camera and prepared by yourselves.

3G-SDI Cable (Optional)

Power Connection

Connect power adapter supplied together with the camera to power source, after powered on,camera’s power indicator lights up.

RS-485 Control Cable

(Optional)

(10)

RS-232 Control Cable

(Optional)

(11)

Operation

Before operating the camera, check if power and other devices have been correctly connected.

Please refer “Installation” and “Cable Connection” for the details.

Zoom Focus

In none-menu status: press or button

to adjust zooming times, press or

button to manually focus the camera.

List of Special Preset

Commands

Preset Features

95 Get into menu

96 Delete all presets

100 1920X1080P50

101 1920X1080P25

102 1920X1080I50

103 1280X720P50

104 1280X720P25

105 1920X1080P60

106 1920X1080P30

107 1920X1080I60

108 1280X720P60

(12)

Installation

The installation type of the camera is wall mount installation.

Note

Before installing,make sure there is enough space to install the camera and its parts.

Make sure the installed place is strong and safe enough to hold the camera and relative parts, it is suggested that the installed place can withstand 4 times the weight of the camera and its relative parts.

Wall Mount

1. According to diameter and position of the 4 installation holes (As shown below) on the bracket, drill 4 holes on the wall and fix the bracket onto the wall by using 4 screws which should be prepared by you.

2. Use screws to fix the camera on the bracket, fix the limit screw according to actual requirement, and make sure the camera is tightly fixed onto the bracket before your hands leave the camera.

(13)

MENU SETTINGS

Menu Configuration

<VIDEO> Refer to page12

SHARPNES 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15

CONTRAST 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14

SATURATION 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14

HUE 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14

2DNR LEVEL ON, OFF

3DNR LEVEL _AUTO_，₁_，₂_，₃_，₄_，_OFF

WIDE DYNAMIC ON, OFF

(14)

<EXPOSURE> Refer to page12

MODE FULL AUTO

MANUAL GAIN 0, +2, +4, +6, +8, +10,

+12, +14, +16, +18, +20, +22, +24, +26,

+28，+30

SPEED 1/1, 1/2, 1/3, 1/6, 1/12,

1/25, 1/50, 1/75, 1/100, 1/120, 1/150, 1/215, 1/300, 1/425, 1/600, 1/1000,1/1250, 1/1750,

1/2500, 1/3500，1/6000,

1/10000

IRIS F14, F11, F9.6, F8,

F6.8, F5.6, F4.8, F4, F3.4, F2.8, F2.4, F2, F1.6, CLOSE

SHUTTER PRI SPEED 1/1, 1/2, 1/3, 1/6, 1/12,

1/25, 1/50, 1/75, 1/100, 1/120, 1/150, 1/215, 1/300, 1/425, 1/600, 1/1000,1/1250, 1/1750,

1/2500, 1/3500，1/6000,

1/10000

IRIS PRI IRIS F14, F11, F9.6, F8,

F6.8, F5.6, F4.8, F4, F3.4, F2.8, F2.4, F2, F1.6, CLOSE

EXP-COMP ON LEVEL -7, -6, -5, -4, -3, -2, -1,

0, +1, +2, +3, +4, +5, +6, +7

OFF

BLC ON,OFF

ANTI FLICKER OFF,50HZ,60HZ

(15)

<WHITE BALANCE> Refer to page13

MODE AUTO

ATW

ONE PUSH

INDOOR OUTDOOR

MANUAL R.GAIN 0~255

B.GAIN 0~255

SODIUM LAMP

FLUO LAMP

BACK

<ZOOM FOCUS> Refer to page13

ZOOM SPEED 1, 2, 3, 4, 5, 6, 7, 8

FOCUS SPEED 1, 2, 3, 4, 5, 6, 7, 8

FOCUS LIMIT 1.5M, 2M, 3M, 6M, 10M

D-ZOOM LIMIT X1, X2, X3, X4, X5, X6, X7,

X8, X9, X10, X11, X12

ZOOM TRIG AF ON, OFF

SAVE POSITION BACK

(16)

< SYSTEM > Refer to page14

ADDRESS 1, 2, 3, 4, 5, 6, 7

PROTOCOL VISCA，PELCO-P，PELCO-D

BAUDRATE 2400，4800，9600，38400

FORMAT 1080p/60，1080p/50，1080i/60

1080i/50，1080p/30， 1080p/25，

720p/60，720p/50，720p/30，720p/25

MOUNT STAND，CEILING

RS485 HALF-DUPLEX-1，HALF-DUPLEX-2

DISPLAY INFO ON，OFF BACK

<STATUS> Refer to page14

ADDRESS 1 PROTOCOL VISCA BAUDRATE 9600 FORMAT 1080I50 MOUNT CEILING IMAGE VER V7132 FIRMWARE V1.0.0 BACK

<RESTORE DEFAULTS> Refer to page15

<EXIT> Refer to page15

(17)

❶

❷

Menu Explanation

Main Menu

Press MENU button to enter / exit menu.

❶Menu Hint

It displays currently selected menu option.

❷ Menu Options

It displays options under current menu hint Press or button to select among

menu options. When an options turned from white color to yellow color, it means the option is selected. Press MENU button to enter the option.

Submenus

From main menu, navigate to select <EXPOSURE> item, press MENU button to enter the submenu.

❶❷ Refer the Main Menu Explanation

❸ Manual Exposure

Press or button to change value

MODE MANUAL GAIN 0 SPEED 1/25 IRIS F14 EXP-COMP 7 BLC ON ANTI FLICKER OFF BACK MENU VIDEO EXPOSURE WHITE BALANCE ZOOM FOCUS SYSTEM STATUS RESTORE DEFAULTS EXIT

❶ ❸ ❷

(18)

Video

VIDEO is used to change video value

SHARPNESS: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15.

CONTRAST: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14.

SATURATION: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14.

HUE: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14.

2DNR LEVEL (2D NOISE REDUCTION): ON, OFF

It is suggested to turn off the 2DNR level for a color video. Otherwise, it will affect the video sharpness. The higher the level is, the better the noise reduction performs, but it will affected video sharpness more.

3DNR LEVEL (3D NOISE REDUCTION): AUTO，1，2，3，4，OFF.

WIDE DYNAMIC: ON, OFF,

BACK

Exposure

EXPOSURE menu is used to adjust exposure value.

MODE

FULL AUTO: Gain, Shutter Speed and Iris value are adjusted automatically accordingly to working environment.

MANUAL: manually adjust Gain, Shutter Speed and Iris.

GAIN: 0, +2, +4, +6, +8, +10, +12, +14, +16, +18, +20, +22, +24, +26, +28，+30。 SPEED:1/1, 1/2, 1/3, 1/6, 1/12, 1/25, 1/50, 1/75, 1/100, 1/120, 1/150, 1/215, 1/300, 1/425, 1/600, 1/1000,1/1250, 1/1750, 1/2500, 1/3500，1/6000, 1/10000.

IRIS: F14, F11, F9.6, F8, F6.8, F5.6, F4.8,

F4, F3.4, F2.8, F2.4, F2, F1.6, CLOSE。

SHUTTER PRI: Sensitivity and Iris value are adjusted automatically according to working environment; shutter speed value is adjustable manually

EXPOSURE

MODE MANUAL

GAIN 0

SPEED 1/25 IRIS F14 EXP-COMP 7

BLC ON ANTI-FLICKER OFF BACK VIDEO SHARPNESS 8

CONTRAST 2

SATURATION 5

HUE 0 2DNR LEVEL 2D OFF 3DNR LEVEL 3D OFF WIDE DYNAMIC OFF BACK

(19)

SPEED:1/1, 1/2, 1/3, 1/6, 1/12, 1/25, 1/50, 1/75, 1/100, 1/120, 1/150, 1/215, 1/300, 1/425, 1/600, 1/1000,1/1250, 1/1750, 1/2500, 1/3500，1/6000, 1/10000。

IRIS PRI: Sensitivity and shutter speed value are adjusted automatically according to working environment; Iris value is adjustable manually.

IRIS: F14, F11, F9.6, F8, F6.8, F5.6, F4.8,

F4, F3.4, F2.8, F2.4, F2, F1.6, CLOSE。

EXP-COMP: once EXP-COMP is set as On, below level options become available -7, -6, -5, -4, -3, -2, -1, 0, +1, +2, +3, +4, +5, +6, +7; +7 is the maximum compensation value for bright, -7 is the maximum compensation value for dark.

BLC: ON, OFF

Backlight compensation (BLC) is video gain done automatically to correct the exposure of subjects that are in front of a bright light source.

ANTI-FLICKER: OFF, 50HZ, 60HZ.

This option is used to address the image flicker issue when camera is used in different lighting environment.

BACK.

White Balance

WHITE BALANCE menu is used to select from white balance modes

MODE: AUTO, ATW, ONE PUSH, INDOOR,

OUTDOOR, MANUAL，SODIUM LAMP，

FLUO LAMP.

“ONE PUSH”: press or button to select

“ONE PUSH TRIGGER” PRESS OK, aim the camera at a pure white object (say a white paper), then press MENU button.

“MANUAL” R.GAIN and B. GAIN value can be chosen from 0~255.

Zoom Focus

ZOOM FOCUS is used to change ZOOM FOCUS.

ZOOM SPEED: 1，2，3，4，5，6，7，8（the

bigger number is, the faster the speed is）.

FOCUS SPEED: 1，2，3，4，5，6，7，8（the

bigger number is, the faster the speed is）.

FOCUS LIMIT:1.5M, 2M, 3M, 6M, 10M

D-ZOOM LIMIT: X1, X2, X3, X4, X5, X6, X7, ZOOM FOCUS

ZOOM SPEED 8 FOCUS SPEED 1 FOCUS LIMIT 1.5M D-ZOOM LIMIT X4 ZOOM TRIG AF ON SAVE POSTTION

(20)

ZOOM TRIG AF: Turn ON / OFF the auto focus when the camera zooms. SAVE POSTTION：

Save the current zoom focus position as the camera powered up initial position. BACK

SYSTEM

ADDRESS: 1，2，3，4，5，6，7（VISCA）;0~255

（PELCO-D）.

PROTOCOL: VISCA，PELCO-D，PELCO-P。

BAUD RATE: 2400，4800，9600，38400。

FORMAT: 1080P60，1080P50，1080P30，

1080P25，1080I60，1080I50，720P60，

720P50，720P30，720P25.

MOUNT: STAND，CEILING.

RS-485 (RS-485 modes):

HALF-DUPLEX-1, HALF-DUPLEX-2.

HALF-DUPLEX-1: in VISCA protocol, camera will not return confirmation, completion or

error messages after commands have been executed.

HALF-DUPLEX-2 in VISCA protocol, camera will return confirmation, completion or error messages after commands have been executed.

DISPLAY INFO（display of zoom focus and

prompt message）：ON，OFF.

STATUS

It displays current camera’s address, protocol, baud rate, video format, mount mode and software version number

STATUS

ADDRESS 1 PROTOCOL VISCA BAUDRATE 9600 FORMAT 1080I50 MOUNT CEILING IMAGE VER V7132 FIRMWARE V1.0.0 BACK

SYSTEM

ADDRESS 1 PROTOCOL VISCA BAUD RATE 9600 FORMAT 1080I50 MOUNT STAND RS485 HALF-DUPLEX-2 DISPLAY INFO ON BACK

(21)

RESTORE DEFAULTS

RESTORE DEFAULTS: This option is used to reset all menus to default value

Press BACK to cancel and return to previous menu.

EXIT

Exit camera menu mode. RESTORE DEFAULTS PRESS OK TO CONFIRM BACK

(22)

ANNEX 1 TECHNICAL SPECIFICATIONS

Image Sensor 1/2.8" CMOS, 2.14 megapixel

Video Format (SDI) 1080p/60, 1080p/50, 1080i/60, 1080i/50, 1080p/30, 1080p/25,

720p/60, 720p/50, 720p/30, 720p/25

Focal Lens f=3.9mm-46.8mm f=4.7mm-94.0mm

Iris F1.6-F2.8 F1.6-F3.5

Optical Zoom 12x 20x

Digital Zoom 12x

Field of View 72.5°-6.3° 59.5°-2.9°

Focus System Auto, Manual, One Push Trigger

Min. Illumination 0.5Lux (COLOR)，0.1Lux (B/W)

Shutter Speed 1/1~1/10,000s

Gain Auto / Manual

White Balance Auto, Indoor, Outdoor, One Push Trigger, Manual, Auto Tracking,

Sodium Lamp, Daylight Lamp.

Wide Dynamic Support

Exposure Control Auto, Manual, Shutter Priority, Iris Priority, Brightness Priority

S/N ≥50dB

DNR 2D/3D

BLC Support

Preset Number 256

OSD Support

Image Flip Support

HD Video Output 3G-SDI

Control Interface RS-232, RS-485

Protocol VISCA/PELCO-D/ PELCO-P

Address 1-7(VISCA), 0-255(PELCO-D/ PELCO-P)

Power DC12V

Power Consumption ＜15W

Operating Temperature 0°C~+40°C

Storage Temperature -20°C~+60°C

Dimension (DxWxH) 170mm×80mm×70mm

Weight 0.83KG

(23)

ANNEX 2 SIZE AND DIMENSION

Front Top

背部

(24)

TROUBLESHOOTING

Problem Possible Cause Solution

No lens action or video after power on

Power supply failure Check power supply

Power adapter damaged Replace power adapter

Power cable connection got loosen Check & reconnect

No control with video After power on

Wrong address / protocol / baud rate Check & set again Wrong connection or open circuit of

(25)

AFTER-SALES SERVICE

Dear Users, to ensure that you will enjoy our quality service, please read carefully below service items.

We offer repair service for free in warranty period and life-long maintenance services. 1. The warranty period is 12 months. Within warranty period, if under the usage of instruction manual, any device broken or damage, it can be returned to factory for free repairing ( improperly use, human factor and irresistible natural phenomenon by the failure or damage are excluded). 2. If warranty expired, we continue to provide paid life-long maintenance services.

Maintenance response time

1. We will response within 24 hours after the camera arrived at factory.

2. Please contact us in advance if you need to ship the product, after confirming, the device can be shipped; otherwise, the device may not be repaired in time and the users will bear all the

(26)

Version Revised Record Revised Date

(27)

(28)

HD-SDI Integrated Camera