How to playback the recorded video stored on
Micro SD card from Windows PC
(Technical Note)
May. 2016
Seyeon Technology Co., Ltd
www.seyeon.co.kr
www.flexwatch.com
1. How to playback the recorded video stored on Micro SD card
from Windows PC
By default, the IP Camera is operating in a Linux System, it is impossible to recognize the Linux
based file system from the Windows PC.
Therefore, you need to install a special utility program which allows you to get an access of
Linux file system from Windows PC.
Paragon ExtFS for Windows is one available 3
rdparty application program. (
http://www.paragon-software.com/home/extfs-windows
)
This application program is available free of charge to private personal users, and needs to input
the Product Key and Serial Number when installing the program. You can get the Product Key and
Serial Number by Paragon. The details will be instructed in the next step.
This manual is a document that guides you how to playback the recorded video stored on Micro
SD card from Windows PC using a program called Paragon ExtFS for Windows.
Paragon ExtFS for Windows program is independent of the Seyeon Tech, and only
describes the basic installation / operation of Paragon ExtFS for Windows Program. For
more detailed usage of this program or additional technical support, you need to contact
Paragon..
2.
Download and installation of Paragon ExtFS for Windows
2.1. Download of Paragon ExtFS for Windows
- How to download Paragon ExtFS for Windows.
1) After
connecting to http://www.paragon-software.com/home/ext fs-windows/ , click FREE DOWNLOAD button to download. And run the program when download is completed.2) Click Registration button when the below registration screen appears.
4) If you enter the required registration data information, Paragon will s end you Product Key and Serial Number by the email address which you entered at registration. ( It may take about 15 minutes to get Product Key and Serial Number )
5) Check your e-mail and input Product Key and Serial Number then click Next button.
7) Click Next button.
9) Click Install button.
11) When installation is completed, Click Close button.
12) Reboot Windows to re-applying for Paragon ExtFS for Windows program by clicking Yes button.
13) If the Paragon ExtFS for Windows icon appears on the Desktop, the installation has been completed.
2.2. To recognize the Micro SD card from Windows PC
1) Insert Micro SD card into SD card slot of Windows PC.
※
Note : When you insert the Micro SD card, the below message appears indicating
that You need to format the disk in drive before you can use it . Do not click Format
disc button. Format disc will delete all data in the Micro SD card. Click Cancel.
2) Click OK button when Location is not available message appears.
* Note : In case the program cannot recognize the Drive automatically, select the Disc volume and click Mount button then select the Drive for your Micro SD card and Click OK.
4) Run Explorer program then you can see G: Drive .
In case you cannot see the Drive, press F5 key to refresh then you can see the Drive.
If you can see the Drive as per above screen, it means Micro SD card has been recognized and now ready to use ( Playback of Micro SD card from Windows PC )
2.3. Download of Micro SD card Playback program
- Download of FJP Player
To playback the recorded Video on Micro SD card, you must have FJP Player program. You can download from Flexwatch website.
1) Connect to http://www.flexwatch.com/support/download/soft ware.asp
2) Click #27 ( FJP Player V1.1.0.0 ) and download FJPPlayer_setup.zip file.
3) Unzip the FJP Player program a nd double click FJPPlayer_setup program then click Next button to start the installation.
4) Click Install button.
6) When installation is completed, Click Finish button.
2.4. Playback of the recorded Video .
- Playback of the recorded Video on Micro SD card using FJP Player.
1) Run Windows Explorer .
2) Select the Drive which was recognized by Paragon ExtFS for Windowsprogram. * On this manual, Drive G: as an example.
3) Move to fimage folder in Drive G:
4) After confirming the created Dat e and Time, double click the fjp file then the stored video data will be automatically played back using FJP Player program.
