SAP Hana Administration

(1)

SAP HANA Live for SAP Business Suite Administrator's Guide

PDF download from SAP Help Portal:

http://help.sap.com/saphelp_hba/helpdata/en/38/b9ea52e9fbe22de10000000a423f68/frameset.htm

Created on May 07, 2015

The documentation may have changed since you downloaded the PDF. You can always find the latest information on SAP Help Portal.

Note

This PDF document contains the selected topic and its subtopics (max. 150) in the selected structure. Subtopics from other structures are not included.

© 2015 SAP SE or an SAP affiliate company. All rights reserved. No part of this publication may be reproduced or transmitted in any form or for any purpose without the express permission of SAP SE. The information contained herein may be changed without prior notice. Some software products marketed by SAP SE and its distributors contain proprietary software components of other software vendors. National product specifications may vary. These materials are provided by SAP SE and its affiliated companies ("SAP Group") for informational purposes only, without representation or warranty of any kind, and SAP Group shall not be liable for errors or omissions with respect to the materials. The only warranties for SAP Group products and services are those that are set forth in the express warranty statements accompanying such products and services, if any. Nothing herein should be construed as constituting an additional warranty. SAP and other SAP products and services mentioned herein as well as their respective logos are trademarks or registered trademarks of SAP SE in Germany and other countries. Please see www.sap.com/corporate-en/legal/copyright/index.epx#trademark for additional trademark information and notices.

Table of content

(2)

Table of content

1 SAP HANA Live for SAP Business Suite Administrator's Guide

1.1 Getting Started

1.2 SAP HANA Live for SAP Business Suite - Overview

1.2.1 Virtual Data Models

1.2.2 SAP BusinessObjects Business Intelligence (BI) Solutions

1.2.3 Applications

1.2.4 SAP HANA Live Extension Assistant

1.3 Technical System Landscape

1.4 Installation Steps - General Information

1.5 Pre-Installation Steps

1.5.1 Prerequisites Checklist

1.5.2 Identify Scope of SAP HANA Live Installation

1.5.3 Install Required Version of SAP HANA Database

1.5.4 Installation of SAP Landscape Transformation Replication Server

1.5.5 Configuration of Replication Between Back End and SAP HANA DB

1.6 Installation and Maintenance Process

1.6.1 Create Database Tables (Side-by-Side Only)

1.6.2 Configure Schema Mapping

1.6.3 Download and Deploy Content Package

1.6.4 Installation Information for Virtual Data Models

1.6.5 Installation Information for Applications

1.6.6 Maintenance and Update Process

1.7 Configuration Steps

1.7.1 Generate Time Data

1.7.2 Replicate Data (Side-by-Side Only)

1.8 Post-Installation Activities

1.8.1 SAP HANA Live Browser

1.8.2 Recommended SAP BusinessObjects BI Solutions

1.8.3 SAP Invoice and Goods Receipt Reconciliation

1.8.4 SAP Access Control

1.8.5 SAP Supply Chain Info Center

1.8.6 SAP Working Capital Analytics

1.9 Operation Information

1.9.1 Technical Operations

1.10 Security

1.10.1 User Administration and Authentication

1.10.2 Authorizations

1.10.2.1 Privileges

1.10.2.2 Authorization for SAP HANA Live for SAP SCM

1.10.2.3 Authorization for SAP Invoice and Goods Receipt Reconciliation

1.10.2.4 Authorization for SAP ERP - Production Planning

1.10.2.5 Authorization for SAP Access Control Role Analytics

1.10.2.6 Authorization for SAP HANA Live for Manufacturing

1.10.2.7 Authorization for SAP HANA Live for Global Trade Services

1.10.2.8 Authorization for SAP Working Capital Analytics

1.10.2.9 Authorization for SAP HANA Live for SAP CRM

1.10.2.10 Authorization for SAP HANA Live for SAP CRM and SAP ERP Cross-An

1.10.2.11 Authorization for SAP HANA Live for Risk Management

1.10.2.12 Authorization for SAP HANA Live for Utilities, edition for SAP C

1.10.2.13 Authorization for SAP HANA Live for Product Revenue Accounting

1.10.3 Communication Channel Security

1.10.4 Communication Destinations

1.10.5 Internet Communication Framework Security

1.10.6 Data Storage in SAP Invoice and Goods Receipt Reconciliation

1.10.7 Cross-Site Request Forgery (XSRF) Protection

(3)

1 SAP HANA Live for SAP Business Suite Administrator's Guide

1.1 Getting Started

About this Document

This document is the single source of information for the implementation of SAP HANA Live for SAP Business Suite. It contains implementation information as well as security and operation information, and is divided into the following main sections:

Introduction with references to related documents and relevant SAP Notes Overview of SAP HANA Live for SAP Business Suite

Technical System Landscape Installation and Configuration Information Operation Information

Security Information

Note

SAP recommends that you read the Release Information Note 1778607 , which informs you about the highest supported SAP HANA release available for SAP HANA Live for SAP Business Suite.

Related Information

For more information about implementation topics not covered in this guide, see the following content on SAP Service Marketplace and on SAP Help Portal:

Content Location on SAP Service Marketplace or SAP Help Portal

SAP HANA Security Guide (including SAP HANA database security)

http://help.sap.com/hana_appliance Security Information SAP HANA Security Guide

SAP HANA extended application services

http://help.sap.com/hana_appliance Development Information SAP HANA Developer Guide

Latest versions of installation and upgrade guides

http://help.sap.com/hana_appliance Installation and Upgrade Information General information about SAP HANA Live for SAP Business Suite

http://help.sap.com/hba

General information about trigger-based data replication using SAP Landscape

Transformation Replication Server http://help.sap.com/hana_appliance

Installation and Upgrade Information Installation Guide – Trigger-Based Data Replication Using SAP LT Replication Server for SAP HANA

Security Information Security Guide – Trigger-Based Data Replication Using SAP LT Replication Server

System Administration and Maintenance Information Application Operations Guide – Trigger-Based Data Replication Using SAP LT Replication Server for SAP HANA

Information about sizing:

http://service.sap.com/sizing Sizing Guidelines Database and Technology SAP In-Memory Computing SAP Landscape Transformation Replication Server, SAP HANA

Released platforms and technology-related topics such as maintenance strategies and

language support http://service.sap.com/platforms

To access the Platform Availability Matrix directly, enter http://service.sap.com/pam

Network Security

http://help.sap.com/hana_appliance Security Information High Availability

http://help.sap.com/hana_appliance System Administration and Maintenance Information SAP HANA Technical Operations Manual (TOM)

Information about Support Package Stacks, latest software versions and patch level

requirements http://service.sap.com/sp-stacks Information about Unicode technology at SAP

http://service.sap.com/unicode

Information about SAP Fiori for SAP Business Suite

http://help.sap.com/fiori

Further Useful Links

The following table lists further useful links on SAP Service Marketplace:

Content Location on SAP Service Marketplace

(4)

Information about creating error messages

http://service.sap.com/message

SAP Notes search

http://service.sap.com/notes

SAP Software Download Center

http://service.sap.com/swdc

Ramp-Up Knowledge Transfer (RKT)

http://service.sap.com/rkt

Important SAP Notes

You must read the following SAP Notes before you start the installation. These SAP Notes contain the most recent information on the installation, as well as corrections to the installation documentation. Some of the SAP Notes also contain source code corrections that need to be implemented.

Make sure that you have the up-to-date version of each SAP Note, which you can find on SAP Service Marketplace at http://service.sap.com/notes .

SAP Note Number Title Description

1778607 SAP HANA Live for SAP Business Suite This Release Information Note informs you about the_{supported SAP HANA releases, that is, it always informs}

you about the highest available support package stack and revision.

1919137 Release Information Note: Frontend Server Content for_{SAP HANA Live Analytical Applications} This note gives you additional information about the new_{UI for several products within the SAP HANA Live}

shipment.

SAP Notes Relevant for APO-Related Analytic Applications

1784479 Collective Note for APO Planning Data Replication to_HANA This SAP Note is released for Support Package 02 or lower_{of SAP HANA Live for SAP SCM.}

1863896 Data Replication from SAP APO to SAP HANA Live This SAP Note is released for Support Package 03 or_{higher of SAP HANA Live for SAP SCM.}

1854279 Data replication from SAP APO to SAP HANA Live SP03 This SAP Note describes the corrections delivered with the_SP03.

1904500 Data replication from SAP APO to SAP HANA Live SP04 This SAP Note is released for Support Package 04 or_{higher of SAP HANA Live for SAP SCM.}

1945658 Data replication from SAP APO to SAP HANA Live SP05 This SAP Note is released for Support Package 05 or_{higher of SAP HANA Live for SAP SCM.}

1955008 Documentation for data replication activities performed in_{SAP HANA Live} This SAP Note contains the documentation about the use_{of replicated data in APO-related analytic applications.}

SAP Notes Relevant for SAP Supply Chain Info Center

You must read the following SAP Notes before you replicate planning data for the analytic application of SAP Supply Chain Info Center:

1887256 Configuration Required for Navigation to SAP APO This SAP Note is released for Support Package 03 or lower_{of SAP Supply Chain Info Center. It describes the}

configuration steps that are required to enable the navigation from SAP Supply Chain Info Center to SAP APO.

1929737 Role Configuration for Navigation to SAP APO This SAP Note is released for Support Package 04 or_{higher of SAP Supply Chain Info Center. It describes the}

configuration steps that are required to enable the navigation from SAP Supply Chain Info Center to SAP APO.

SAP Notes Relevant for SAP Landscape Transformation Replication Server

1605140 Central Note – SAP LT Replication Server Collective Note for all the relevant SAP Notes for SAP LT_{Replication Server for SAP HANA.}

1882433 Installation/Upgrade SLT – DMIS 2011 SP5 Collective SAP Note that includes compatibility_{information and references to required corrections.}

1691975 HANA LTR – Clarification on DMIS releases This SAP Note describes the decision criteria for choosing_{the correct software version.}

1768805 SAP LT Replication Server: Collective SAP Note – Non-_{SAP Sources} This SAP Note describes details about using the SAP LT_{Replication Server for non-SAP source systems.}

1733714 Guide for Advanced Replication Settings Provides additional information about transaction_{IUUC_REPL_CONTENT to specify advanced replication}

(5)

1.2 SAP HANA Live for SAP Business Suite - Overview

SAP HANA Live for SAP Business Suite provides enhanced quality for analytics across all Business Suite applications by enabling industry-standard access to SAP data through easily understandable data models.

The SAP Business Suite application data models – optimized for data throughput and best performance in transactional scenarios – are optimized for analytic purposes using views in the SAP HANA database. These views form a virtual data model that customers and partners can reuse. The virtual data model is a foundation for future SAP analytic development.

Data provided by the virtual data model can be presented through multi-purpose analytical UIs, such as SAP BusinessObjects BI Suite UIs, and domain-specific web applications.

SAP HANA Live Architecture

Features

A virtual data model

Analytical applications on top with rich client UIs

SAP HANA Live for SAP Business Suite provides the following advantages compared to regular reporting solutions:

Open

Any access to the reporting framework is based on standard mechanisms such as SQL or MDX. No BW modeling or ABAP programming will be required.

Uniform

One approach is chosen for all SAP Business Suite applications, enabling a common reporting across application boundaries.

Intuitive

The virtual data model hides the complexity and Customizing dependencies of our SAP Business Suite data model to make data available without requiring a deep understanding of SAP models.

Fast

SAP HANA Live for SAP Business Suite features SAP HANA as the underlying computing engine, to enable fast analytics on high data volumes.

Real-time

Since all reporting happens on primary data (or a real-time replication of it), there is no need to wait for data warehousing loading jobs to finish. The cycle time from recording to reporting is dramatically reduced.

Virtual data models provide the foundation for operative reporting based on SAP HANA. They allow for the consumption of business data through generic

analytical clients such as SAP BusinessObjects Analysis, edition for Microsoft Office and/or scenario-specific analytical applications.

The application is the UI on top of a virtual data model, which consumes the data in the underlying views. Applications visualize the data in an understandable way.

1.2.1 Virtual Data Models

A virtual data model (VDM) is a structured representation of HANA database views used in SAP HANA Live for SAP Business Suite and follows consistent modeling rules.

It provides direct access to SAP business data using standard SQL or OData requests. Business data is exposed through well-defined database views, operating directly on the tables of the SAP Business Suite systems and transforming them into consistent and easily understandable views. These views can be consumed directly by rich client UIs (such as HTML5, SAP BusinessObjects, and Excel) without any additional software layer (an ABAP application system, for

(6)

example) in between (two-tier architecture).

Structure

A virtual data model consists of the following types of views:

Query views are designed for direct consumption by an analytical application (based on HTML5, for instance) or a generic analytical tool (for example,

BusinessObjects tools). They are always the top view in a hierarchy of views and are not designed for reuse in other views. However, the virtual data model also includes query views to support (showcase) applications based on the virtual data model.

Note

The interface of the query views is kept stable.

The name of a query view ends with Query and provides output fields in a format consumable by UIs:

Example

CostCenterPlanActualCostsQuery

Reuse views are the heart of the virtual data model. They expose the business data in a well-structured, consistent and comprehensible way, covering all

relevant business data in SAP Business Suite systems. They are designed for reuse by other views and must not be consumed directly by analytical tools.

Private views encapsulate certain SQL transformations on one or several database tables or even other views. They are not classified as reuse views, as

they might not carry clear business semantics, but are rather intended to be reused in other views. They are comparable to subroutines or (private) methods in programming languages. A private view may be based on database tables, other private views, or on reuse views.

Value help views (VHVs) provide the value list for a specific business entity that is used in a value help in a query view. Relevant business entities are

specified by an identifier or code. A maximum of one VHV is defined for each business entity per package. A VHV is included either in an underlying package to the business query views that make use of it, or in the same package. In SAP HANA, for each main package a specific VHV exists for a specific business entity.

You can find a complete list of views in the SAP HANA Live Browser. For information about classification views, see SAP Note 1892589 . For information about variant configuration views, see SAP Note 1987669 .

Enhancing SAP HANA Live

Note that you cannot extend views delivered by SAP directly; you must make a copy first.

For more information about how to enhance SAP HANA Live, see https://scn.sap.com/docs/DOC-44726 .

Note that this link intends to serve as a hint where to find supplementary documentation. SAP does not warrant the availability and correctness of such supplementary documentation or the ability to serve for a particular purpose. SAP shall not be liable for any damages caused by the use of such documentation unless such damages have been caused by SAP's gross negligence or willful misconduct.

1.2.2 SAP BusinessObjects Business Intelligence (BI) Solutions

You can, for instance, consume the virtual data models with SAP BusinessObjects BI Solutions. For more information, see Recommended SAP BusinessObjects BI Solutions.

1.2.3 Applications

HTML5 applications visualize the data from the virtual data models and allow you to analyze your data in an easy to understand way.

Name of Application Technical Name of Application Area

SAP HANA Live Browser HCO_HBA_AF_EXPLORER All SAP HANA Live authorization assistant HCO_HBA_AAA All SAP HANA Live extension assistant HCO_HBA_T_EXTN All SAP Invoice and Goods Receipt Reconciliation HCO_HBA_APPS_GRIRM SAP ERP SAP Access Control HCO_HBA_APPS_GRCA SAP GRC SAP Supply Chain Info Center HCO_HBA_APPS_APOAN SAP SCM SAP HANA Live for Manufacturing, option for

performance management

HCO_HBA_APPS_OEE MFG-MPM

SAP Working Capital Analytics HCO_HBA_A_WCA_DSO_U HCO_HBA_A_R_APF HCO_HBA_A_WCA_DSO_S HCO_HBA_A_WCA_DPO_U HCO_HBA_A_R_APF HCO_HBA_A_WCA_DPO_S SAP ERP

(7)

The applications are based on SAP HANA extended application services.

1.2.4 SAP HANA Live Extension Assistant

With the SAP HANA Live extension assistant, you can extend query or reuse views delivered by SAP. The tool is an eclipse plug-in for the SAP HANA studio. Extending reuse views

You can extend reuse views using this tool. The extended views are created as new reuse views in the package you selected. The tool lists all the underlying columns from all underlying tables of a reuse view. You can select the column that needs to be added as an output of the view and a new extended reuse view is created. The newly added view column can only be of the type Attribute.

Extending query views

You can extend query views using this tool. The extended views are created as new query views in the package you selected. The tool lists all the underlying reuse views of a selected query view. For each of the reuse views, unused columns are displayed. You can select the required columns to be added to output of the view from the underlying reuse view. To extend query views, you can select underlying reuse views or extended reuse views. Extending existing extensions

You can also extend views for which an extension already exists.

Note

You can only select packages if you are authorized to create or activate content in these packages. SAP does not recommend that you modify any views created by the tool using the Modeler perspective. Note that, if you do, the tool can no longer be used to modify the views.

For more information, see SAP Help Portal at http://help.sap.com/hba Application Help SAP HANA Live Tools SAP HANA Live Extension Assistant .

Prerequisites

You have installed the following software: Delivery unit HCO_HBA_T_EXTN.tgz

SAP HANA Appliance Software Support Package Stack 08, revision 82 or higher For more information, see Download and Deploy Content Package.

Note

You must assign the role sap.hba.tools.extn:roles::ExtensibilityDeveloper to users who would like to extend views using this tool.

Installation

To install the SAP HANA Live extension assistant, perform the following steps in sequential order: 1. In the SAP HANA Studio, choose Help and then Install New Software.

An installation window opens.

2. Enter the URL of software update site http://<SAPHANAWebServerHost>:80<SAPHANAinstance>/sap/hba/tools/extn in the field Work with. The Installation window now lists the SAP HANA Live extension assistant as available software in the list of plug-ins.

3. Click Add to save the URL for easy retrieval. The dialog box Add Repository opens.

4. Select the plug-in for the SAP HANA Live extension assistant from the list of available plug-ins. Retain the remaining default selections and click Next. 5. A review window opens where you can verify the information you entered. Click Next.

6. The License Agreement window opens. Review the licenses and click I accept the terms of the license agreements. Then click Finish. 7. The Installing Software dialog box opens, where you can view the installation progress.

8. A warning message may appear stating that the software contains unsigned content. Click OK. 9. After the installation, a verification box opens asking you to restart SAP HANA Studio. Click Yes. 10. Restart the SAP HANA studio. Right-click query/reuse views and choose Extend View to extend the view.

1.3 Technical System Landscape

The following diagrams provide an overview of the technical system landscape for SAP HANA Live for SAP Business Suite. You have two options:

Side-by-side scenario

Two separate systems where the data is replicated using SAP Landscape Transformation Replication Server.

(8)

Side-by-Side Scenario

Integrated scenario

SAP HANA Live shares an SAP HANA appliance with the Business Suite system, whose data is used for SAP HANA Live. This scenario is recommended for source systems that run on SAP HANA.

Integrated Scenario

1.4 Installation Steps - General Information

The SAP HANA appliance software comes pre-installed on a specific appliance hardware system delivered in conjunction with leading SAP hardware partners. This chapter describes the required installation and configuration steps for the SAP HANA Live content packages and applications.

Installation Process

(9)

side-by-side installation, the steps relevant for handling the table replication from the SAP Business Suite system into the side-by-side-by-side-by-side SAP HANA database are also necessary.

Overview of Installation Process

Integrated Scenario

In the integrated scenario, you do not need to create and replicate the database tables, as they are already available in the SAP HANA database. They are maintained through the data dictionary of the corresponding ABAP Application Server. Therefore, all steps regarding table creation and data replication are not relevant in this scenario. Since the ABAP server creates all tables in one specific database catalog schema (typically <SAPSID>), this needs to be mapped to the authoring schema of the imported content packages. For more information, see Configure Schema Mapping and SAP Note 1800515 .

Side-by-Side Scenario

In the side-by-side scenario, the database tables that are used by the SAP HANA Live products need to be replicated from the corresponding SAP Business Suite back-end system into the SAP HANA database. This is done using SAP Landscape Transformation Replication Server. If you want to execute SAP HANA Live views, the data from the corresponding tables must be available. SAP recommends to create all required tables as specified in the SAP Notes

corresponding to the SAP HANA Live products, and to replicate the data only for those tables that are used in executed analytical scenarios. This ensures that no unnecessary data is replicated, that no unnecessary SAP Landscape Transformation Replication Server resources are consumed, and that no unnecessary DB memory is consumed. Later on, data for additional tables can be replicated on demand if you want to execute additional scenarios. For more information, see

Replicate Data (Side-by-Side Only).

1.5 Pre-Installation Steps

Before starting the installation process, it is important to identify the scope and the sequence of the SAP HANA Live products. The Prerequisites Checklist provides you with a quick overview; it is followed by sections that contain detailed information that is required for the installation process.

1.5.1 Prerequisites Checklist

This checklist helps you to perform the implementation efficiently.

System Details SAP HANA

System Production System Example Comment

System Answer required ld4711.sap.corp Server ID

Instance Answer required 00 system instance

SAP Landscape Transformation Replication Server

System Answer required SLT system ID

(10)

Client Answer required 005 client of SLT system

Back-End System

System Answer required ERP system ID

User for replication Answer required 010 client of back-end system

Password for replication user Prepare password to be available during configuration. Do not note it down here for security reasons.

System Prerequisites SAP HANA Version

Check that the correct version of SAP HANA is installed

Expected Value Your Version

SAP HANA Appliance Software Support Package Stack 08 Answer required SAP HANA Studio Software Support Package Stack 08 Answer required SAP HANA Lifecycle Manager Latest Version Answer required SAP Landscape Transformation Replication Server Installation

Install SAP Landscape Transformation Replication Server

Expected Value Your Version Comment

Decide on installation option for SAP Landscape Transformation Replication Server (co-deployment in back end or separate server)

Answer required

Co-Deployment: No SAP Landscape Transformation Replication Server deployment needed, since SAP HANA Live VDM views operate directly on the SAP HANA DB Separate server:

a) Provide SAP Landscape Transformation Replication Server and install it

b) install SAP Landscape Transformation Replication Server add-on on back end

SAP Landscape Transformation Replication Server is available as add-on DMIS

Answer required DMIS 2011 SP06 or higher recommended

Connectivity

RFC Destination from SAP Landscape Transformation Replication Server to Back End

For communication from SAP Landscape Transformation Replication Server to the back-end system an RFC destination is required

Provide the user ID of the user to be used to access the back end for data replication

SLT_REP Answer required

Password for user (data read from back end)

Prepare password to be available during configuration of RFC. Do not note it down here for security reasons.

Assign the necessary roles to this user n/a Maintain the profile of the role and assign the role to the user afterwards.

See chapter 5 of the Security Guide on SAP Help Portal at

http://help.sap.com/hana_appliance

Security Information Security Guide – Trigger-Based Data Replication Using SAP LT Replication Server

In transaction SM59 in SAP Landscape Transformation Replication Server, create an RFC destination of type “3”

Maintain RFC destination Test RFC destination after it is created.

Secondary DB-Connection from SAP Landscape Transformation Replication Server to SAP HANA

For communication from SAP Landscape Transformation Replication Server to the SAP HANA DB system, a secondary DB connection is required

User for setup of replication (already exists in SAP HANA DB)

Answer required Input needed in transaction LTR

Password for setup user Prepare password to be available during configuration. Do not note it down here for security reasons.

Define HANA DB schema name (schema into which data get replicated)

Answer required Input needed in transaction LTR

Define number of jobs to be used for data replication Input needed in transaction LTR. Observe the additional hints in section Configuration of Replication Between Back

(11)

End and SAP HANA DB. SAP HaNA Registration in SAP Solution Manager

To download SAP HANA Live content, you can use SAP Solution Manager. If this option is chosen, you must register your SAP HANA DB accordingly

Register the SAP HANA DB in the System Landscape Directory (SLD) Answer required

1.5.2 Identify Scope of SAP HANA Live Installation

Consider the following when planning the scope of your installation:

the back ends must meet the requirements of the SAP HANA packages you want to install the sequence of packages to be deployed during the installation process

You can find the information about the back-end requirements and dependencies either between SAP HANA Live products or to the SAP HANA database in the sections Installation Information for Virtual Data Models and Installation Information for Applications.

1.5.3 Install Required Version of SAP HANA Database

To install the SAP HANA Live content, an SAP HANA database installation fulfilling the following prerequisites is necessary:

SAP HANA Appliance Software Support Package Stack 08 SAP HANA Studio Software Support Package Stack 08

As of SAP HANA Appliance Software Support Package Stack 08, use the SAP HANA lifecycle manager for the most recent update if you already have the SAP HANA Appliance Software installed.

More Information

For information about how to configure the SAP HANA lifecycle manager, see SAP Help Portal at http://help.sap.com/hana_appliance Installation and Upgrade Information SAP HANA Update Guides SAP HANA Update and Configuration Guide .

For information about how to install SAP HANA Studio, see SAP Help Portal at http://help.sap.com/hana_appliance Installation and Upgrade Information SAP HANA Studio Installation Guide .

The SAP Business Suite product for which the SAP HANA Live product is installed needs to fulfill some prerequisites. They are specified in the section

Installation Information for Virtual Data Models.

1.5.4 Installation of SAP Landscape Transformation Replication

Server (Side-by-Side Only)

If you run the side-by-side installation, data must be replicated from the back ends into the SAP HANA database. SAP recommends to use the SAP Landscape Transformation Replication Server for this.

Note

This should be completed prior to the installation of SAP HANA Live. Note that you must plan some time for the installation process.

Install SAP Landscape Transformation Replication Server

Install the SAP Landscape Transformation Replication Server as described in the corresponding installation guide and configure the connection from the SAP Business Suite source system to the target SAP HANA database. If you decide to install SAP Landscape Transformation Replication Server on a separate system, additional hardware is required.

For the installation process, see SAP Help Portal at http://help.sap.com/hana_appliance :

Installation and Upgrade Information Installation Guide – Trigger-Based Data Replication Using SAP LT Replication Server for SAP HANA Security Information Security Guide – Trigger-Based Data Replication Using SAP LT Replication Server

Install Data Migration Server (DMIS) Add-On on Back End

For the replication, the DMIS add-on is required in the back end for the communication between the back end and SAP Landscape Transformation Replication Server.

Caution

Plan the DMIS installation in your back ends carefully. Important SAP Notes

SAP Note Number Title Comment

1605140 Central Note – SAP LT Replication Server Contains all SAP Notes relevant for LT Replication Server_{for HANA.}

1882433 Installation/Upgrade SLT – DMIS 2011 SP5 Collective SAP Note that includes compatibility

(12)

1882433 _{information and references to required corrections.}

1691975 HANA LTR – Clarification on DMIS releases Contains decision criteria for choosing the correct software_version.

1768805 SAP LT Replication Server: Collective Note – Non-SAP_Sources This SAP Note describes details about using the SAP LT_{Replication Server for non-SAP source systems.}

1824710 Installation/Upgrade SLT – DMIS 2011 SP4 / 2010 SP9 Contains information required if you want to install or_{upgrade the SAP LT Replication Server for SAP HANA}

using DMIS 2011 SP4 or DMIS 2010 SP9.

1.5.5 Configuration of Replication Between Back End and SAP

HANA DB

Once a configuration is created in SAP Landscape Transformation Replication Server, you use SAP HANA studio to initiate and control the table-based replication process of SAP Landscape Transformation Replication Server.

For information about the configuration and replication process, follow the instructions given in the Application Operations Guide, available on SAP Help Portal at

http://help.sap.com/hana_appliance System Administration and Maintenance Information Application Operations Guide – Trigger-Based Data Replication Using SAP LT Replication Server for SAP HANA :

Create Database Catalog Schema (Side-by-Side Only)

During the configuration and replication process, a database schema must be defined in which the database tables are replicated. This replication schema must be mapped to the relevant authoring schema in the next step. This schema is automatically created in your SAP HANA database. For more information, see

Configure Schema Mapping.

More Information

For more information about how to improve the initial load, see http://scn.sap.com/community/replication-server/blog/2013/09/26/how-to-improve-the-initial-load-by-row-id-approach . For more information about how to enable parallel replication, see http://scn.sap.com/community/replication-server/blog/2013/10/04/how-to-enable-parallel-replication . Note that these links are intended to serve as a hint where to find supplementary documentation. SAP does not warrant the availability and correctness of such supplementary documentation or the ability to serve for a particular purpose. SAP shall not be liable for any damages caused by the use of such documentation unless such damages have been caused by SAP’s gross negligence or willful misconduct.

1.6 Installation and Maintenance Process

Caution

Note the following:

For the schema mapping, the information Authoring Schema, given in the tables in section Installation Information for Virtual Data Models, is relevant. For the creation of the database tables, the information Tables for Replication, given in the tables in section Installation Information for Virtual Data Models, is relevant.

SAP Notes, if required, are also provided there.

1.6.1 Create Database Tables (Side-by-Side Only)

Once the schema and the schema mapping have been prepared, the required tables need to be made available in the schema. Since the tables and their replications consume system resources (depending on their size), SAP recommends to replicate the data only for tables that are actually used, and to merely create all other tables.

Prerequisites

Ensure that you have completed all required steps described in Install Required Version of SAP HANA Database and Configuration of Replication Between Back End and SAP HANA DB.

Table Creation

The tables that are needed before the deployment of a specific content package are specified in the SAP Notes that you can find in the tables in Installation Information for Virtual Data Models and Installation Information for Applications. Depending on whether you want to create or replicate tables, consider the following:

(13)

Table Creation

If you want to only create the required tables, the list of tables must be added to the corresponding configuration table of SAP Landscape Transformation Replication Server. Note that, with DMIS 2011, SP06, this process has been considerably simplified. For more information, see SAP Note 1799313 . Table Replication

If you want the tables to be fully replicated, you can do so using the standard data provisioning view of the SAP HANA studio. The list of tables can be imported directly from the CSV file attached to the SAP Note.

More Information

For more information, see Replicate Data (Side-by-Side Only).

For information about the configuration and replication process, see SAP Help Portal at http://help.sap.com/hana_appliance System Administration and Maintenance Information Application Operations Guide – Trigger-Based Data Replication Using SAP LT Replication Server for SAP HANA :

1.6.2 Configure Schema Mapping

You must set up a schema mapping to map the authoring schema of a content package to the physical database schema of the relevant tables. The authoring schema is the database schema that is referred to in the content package. In a customer system, the tables are typically stored in another database schema, namely either in the schema configured in SAP Landscape Transformation Replication Server (for the side-by-side scenario) or in the database schema of the ABAP installation (for the integrated scenario). For more information, see Configuration of Replication Between Back End and SAP HANA DB.

Required Steps

In the SAP HANA Studio, in the Modeler perspective, on the Quick Launch tab, select the relevant SAP HANA system and choose Setup, then Schema Mapping to add a new schema mapping from the authoring schema to the physical schema.

Example

Package sap.hba.ecc refers to the authoring schema SAP_ECC. In your customer landscape the ECC tables are replicated into schema CUSTOMER. Then a schema mapping from SAP_ECC to CUSTOMER needs to be added.

1.6.3 Download and Deploy Content Package

Prerequisites

Ensure that you have at least created all tables required for the activation, as described in Create Database Tables (Side-by-Side Only).

Downloading and Deploying Content Packages

Recommendation

SAP recommends using SAP Solution Manager to install and update SAP HANA Live products and Maintenance Transactions. This allows you to deploy several product versions at once.

Alternatively, you can download the required zip files directly from SAP Service Marketplace and deploy them manually. This means only single product versions can be deployed.

Note

Your SAP HANA database has to be registered in the System Landscape Directory (SLD).

In addition, your SAP HANA database must be created as a product system in the Landscape Management Database. You do this in SAP Solution Manager using transaction lmdb. This is necessary for the steps described under SAP Solution Manager below.

For more information about how to register in SLD, see SAP Help Portal at http://help.sap.com/hana_appliance Installation and Upgrade Information SAP HANA Update Guides SAP HANA Update and Configuration Guide .

SAP Solution Manager: Download product stacks (SAR and XML files) to deploy several product versions at once

1. In SAP Solution Manager, run transaction lmdb. On the Product Systems tab, select your product system and choose Display. 2. In the navigation tree, click on the top node (Product System).

3. On the Maintenance Transactions tab, under Maintenance Optimizer Transactions, choose Create Transaction. 4. Under Choose File Selection Mode choose Calculate Files Automatically and then choose Continue.

5. On the Operations tab, under Change Options, select change option Support Package Stacks – Implementation of Support Packages and choose Continue.

6. If you are not yet running SPS 08 or higher, set it as your target stack under Select Target and choose Continue.

Note

This will update your SAP HANA DB to SPS 08 or higher. 7. Confirm the Major Target by choosing Continue.

(14)

8. To choose your products, note the following:

Note

If you are using Maintenance Optimizer 3.0, the Add-On Product List is created dynamically. You initially see only add-ons that can be installed directly on the SAP HANA database. If you want to install an add-on that requires another add-on to be installed, you must first select the required product version on which the product you want to install is based.

Example

You want to install the product version SAP WORK CAPITAL ANALYTICS 1.0. For this product version to be listed, you must first have selected SAP HANA ANALYTICS FOR ERP 1.0.

To find out the required product version of your product, see Installation Information for Virtual Data Models.

If you product has several instances, you must select the instances you want to install manually. When your instance is selected, choose Apply. 9. Follow this procedure for all products you want to install. When you are done, choose Continue.

10. Under Select OS/DB-Dependent Files, expand the instance node under File Name. Select SAP HANA database and choose Continue. 11. Under Select Files for Add-on Products, choose Continue.

12. Under Select Stack-Dependent Files, under File Name, new database patches are pre-selected by default. If you do not want to install these patches, de-select them. You must not deselect OS-DB if you are upgrading your SAP HANA databse to HANA SPS 08. Choose Continue. 13. Confirm the download basket by choosing Continue.

14. On the Stack Files tab, download the System-Specific XML for SLM. Save and close the Maintenance Optimizer windows. Then download the calculated files using SAP Download Manager from SAP Service Marketplace. Make the downloaded files and XML files available on your SAP HANA appliance.

15. As the SYSTEM user in the SAP HANA studio, right-click on the server node in the navigation pane, and select Lifecycle Management. 16. Select Apply Support Package Stack under Update SAP HANA System.

17. Choose Manually downloaded content, then browse to find the content you downloaded in step 5 and run the installation and update procedure. For more information about the Maintenance Optimizer, see SAP Help Portal at http://help.sap.com/solutionmanager71 Application Help SAP Library SAP Solution Manager Maintenance Management Maintenance Optimizer .

SAP Service Marketplace: Download zip files to deploy single product versions manually

Note

You must have updated your SAP HANA appliance to SPS 08 or higher.

Ensure that you have installed the required product versions. The sequence of the zip-files installation must be done according to their dependencies. For this, the information Required Product Version, given in the tables in section Installation Information for Virtual Data Models, is relevant.

Installation of SAP HANA DB SPS08 and lower

1. Go to https://service.sap.com/swdc Installations and Upgrades Browse Our Download Catalog SAP In-Memory (SAP HANA) SAP HANA Add-ons .

2. Download the zip files for the SAP HANA Live installation you require.

3. As the SYSTEM user in the SAP HANA studio, right-click on the server node in the navigation pane, and select Lifecycle Management. 4. Select Deploy HANA Content under Manage SAP HANA Applications Content.

5. On the screen Deploy SAP HANA Content choose the option From an accessible share or From a Personal Computer.

6. Under Path of remote HANA content ZIP archive, browse to the zip files you have downloaded. You can select and deploy only one zip file at a time. Choose Next.

Ensure the correct installation sequence. 7. When you are done, choose Run.

8. Repeat steps 5, 6 and 7 for each SAP HANA Live product you want to install.

For more information about how to configure the SAP HANA Lifecycle Manager, see SAP Help Portal at http://help.sap.com/hana_appliance

Installation and Upgrade Information SAP HANA Update Guides SAP HANA Update and Configuration Guide .

Installation as of SAP HANA DB SPS09

1. Go to https://service.sap.com/swdc Installations and Upgrades Browse Our Download Catalog SAP In-Memory (SAP HANA) SAP HANA Add-ons .

2. Download the zip files for the SAP HANA Live installation you require.

3. Ensure that you have configured SAP HANA Application Lifecycle Management as described in the respective section on SAP Help Portal at

http://help.sap.com/hana_appliance Development Information SAP HANA Developer Guide .

4. Using hdbalm, install all the SAP HANA Live products you require. Follow the instructions described in the section Installing and Updating Add-On Products and Software Components on SAP Help Portal at http://help.sap.com/hana_appliance System Administration and Maintenance Information SAP HANA Administration Guides SAP HANA Administration Guide .

1.6.4 Installation Information for Virtual Data Models

The virtual data models listed below are available with SAP HANA Live for the different areas of SAP Business Suite.

Installation Information for SAP HANA ANALYTICS FOR ERP 1.0

Instance: HANA Content ECC Server

Official Name SAP HANA Live for SAP ERP

Name SAP HANA ANALYTICS FOR ERP 1.0

(15)

Required Product Version SAP HANA Platform Edition 1.0 SPS08, revision 82 or higher Back-End Prerequisites (Minimum Version) SAP ERP 6.0 SP 12 and all equivalent enhancement packages

Authoring Schema SAP_ECC

Tables for Replication

See SAP Note 1781992

Installation Information for SAP HANA ANALY. ERP EHP4 1.0

Instance: HANA Content Central Appl.

Official Name SAP HANA Live for EHP 4 for SAP ERP

Name SAP HANA ANALY. ERP EHP4 1.0

Software Component HANA CON. HBA BS_FND_701 100 SP06 (technical name HCO_HBA_ECCFND701) Required Product Version SAP HANA ANALYTICS FOR ERP 1.0 SPS010, instance HANA Content ECC Server Back-End Prerequisites (Minimum Version) EHP4 for SAP ERP 6.0

Instance: HANA Content for Insurance (FS-CM and FS-CD)

Software Component HANA CONTENT HBA INSURANCE 100 SP08 (technical name HCO_HBA_FSCX604) Required Product Version SAP HANA ANALYTICS FOR ERP 1.0 SPS010, instance HANA Content ECC Server

Deploy and activate the ECC views BusinessPartnerName and BusinessPartnerCategoryName required for FS-CM from package

HCO_HBA_ECC prior to deploying FS-CM views from package HCO_HBA_FSCX604. Back-End Prerequisites (Minimum Version) EHP4 for SAP ERP 6.0

Add-On Insurance

Instance: HANA Content HCM Renewal

Software Component HANA CONT. HBA HCM RENEWAL 100 SP06 (technical name HCO_HBA_APPS_HCMR)

Required Product Version SAP HANA PLATFORM EDIT. 1.0 SPS08, revision 82 or higher Back-End Prerequisites (Minimum Version) EHP4 for SAP ERP 6.0 Stack 11

Instance: Human Capital Management

Authoring Schema SAP_HCM

Installation Information for SAP HANA ANALY. ERP EHP7 1.0

Instance: HANA Content Central Appl. VDM

Software Component HANA CONT. HBA SAPAPPL607 100 ISS (technical name HCO_HBA_APPL607) Required Product Version SAP HANA ANALY. ERP EHP4 1.0 SPS08, instance HANA Content Central Appl. Back-End Prerequisites (Minimum Version) SAP enhancement package 7 (SP 07) for SAP ERP

Installation Information for SAP HANA ANALYTICS FOR CRM 1.0

Instance: HANA Content CRM Server

Official Name SAP HANA Live for SAP CRM

Name SAP HANA ANALYTICS FOR CRM 1.0

Software Component HANA CONTENT HBA SAP CRM 100 SP08 (technical name HCO_HBA_CRM)

(16)

Required Product Version SAP HANA PLATFORM EDIT. 1.0 SPS08, revision 82 or higher Back-End Prerequisites (Minimum Version) EHP1 for SAP CRM 7.0 SP09

Authoring Schema SAP_CRM

Installation Information for SAP HANA ANALYTICS FOR SCM 1.0

Instance: HANA Content for SCM Server

Official Name SAP HANA Live 1.0 for SAP SCM

Name SAP HANA ANALYTICS FOR SCM 1.0

Software Component HANA CONTENT HBA SAP SCM 100 SP09 (technical name HCO_HBA_SCM_APO) Required Product Version SAP HANA PLATFORM EDIT. 1.0 SPS08, revision 82 or higher

Back-End Prerequisites (Minimum Version) SAP SCM 7.0 SP14 See SAP Note 1904500

Authoring Schema SAP_SCM

Installation Information for SAP HANA ANALYTICS FOR GRC

Instance: HANA Content GRC

Official Name SAP HANA Live for SAP solutions for GRC

Name SAP HANA ANALYTICS FOR GRC 1.0

Software Component HANA CONTENT HBA SAP GRC 100 SP09 (technical name HCO_HBA_GRC) Required Product Version SAP HANA PLATFORM EDIT. 1.0 SPS08, revision 82 or higher

Back-End Prerequisites (Minimum Version) SAP Access Control 10.0 SP13

Authoring Schema SAP_GRC

Installation Information for SAP HANA ANALY. F. GRC10.1 1.0

Instance: HANA Content GRC 10.1

Official Name SAP HANA Live for SAP solutions for GRC

Name SAP HANA ANALY. F. GRC10.1 1.0

Software Component HANA CONT. HBA SAP GRC101 100 SP02 (technical name HCO_HBA_GRC101) Required Product Version SAP HANA ANALYTICS FOR GRC 1.0 SPS09, instance HANA Content GRC Back-End Prerequisites (Minimum Version) SAP Risk Management 10.1 SP06

Authoring Schema SAP_GRC

Installation Information for SAP HANA ANALYTICS FOR GTS 1.0

Instance: HANA Content for GTS Server

Official Name SAP HANA Live 1.0 for SAP GTS

Name SAP HANA ANALYTICS FOR GTS 1.0

Software Component HANA CONTENT HBA SAP GTS 100 SP08 (technical name HCO_HBA_GTS) Required Product Version SAP HANA PLATFORM EDIT. 1.0 SPS08, revision 82 or higher Back-End Prerequisites (Minimum Version) SAP GTS 10.0 SP06

Authoring Schema SAP_GTS

Installation Information for SAP HANA ANALY. FOR FS-PM 1.0

Instance: HANA Content Insurance FS-PM

Official Name SAP HANA Live 1.0 for Policy Management

(17)

Software Component HANA CONTENT HBA FS-PM 100 SP06 (technical name HCO_HBA_FSPM510) Required Product Version SAP HANA PLATFORM EDIT. 1.0 SPS08, revision 82 or higher

Back-End Prerequisites (Minimum Version) SAP FS-PM 5.1 (SP08). If you have SP01-07, you need to implement SAP Note

1918954

Authoring Schema SAP_FSPM

Installation Information for SAP HANA ANALYTICS FOR TM 1.0

Instance: HANA Content Transport. Mgmt.

Official Name SAP HANA Live for SAP Transportation Management

Name SAP HANA ANALYTICS FOR TM 1.0

Software Component HANA CONTENT HBA SAP TM 100 SP06 (technical name HCO_HBA_TM) Required Product Version SAP HANA PLATFORM EDIT. 1.0 SPS08, revision 82 or higher Back-End Prerequisites (Minimum Version) SAP Transportation Management 9.0 SP07

Authoring Schema SAP_TM

Installation Information for SAP HANA ANALYTICS FOR EM 1.0

Instance: HANA Content Event Mgmt.

Official Name SAP HANA Live for SAP Event Management

Name SAP HANA ANALYTICS FOR EM 1.0

Software Component HANA CONTENT HBA SAP EM 100 SP06 (technical name HCO_HBA_EM) Required Product Version SAP HANA PLATFORM EDIT. 1.0 SPS08, revision 82 or higher Back-End Prerequisites (Minimum Version) SAP Event Management 9.0 SP04

Authoring Schema SAP_EM

Installation Information for SAP HANA ANALYTICS F. EMX 1.0

Instance: HANA Content EMX

Official Name SAP HANA Live for Event Management and Transportation Management cross-analytics

Name SAP HANA ANALYTICS F. EMX 1.0

Software Component HANA CONTENT HBA EMX 100 SP02 (technical name HCO_HBA_X_EM) Required Product Version SAP HANA ANALYTICS FOR EM 1.0 SPS06, instance HANA Content Event Mgmt. Back-End Prerequisites (Minimum Version) SAP Event Management 9.0 SPS08

Authoring Schema SAP_EM

Installation Information for SAP HANA ANALY. FOR EWM 1.0

Instance: HANA Content EWM

Official Name SAP HANA Live for Extended Warehouse Management

Name SAP HANA ANALY. FOR EWM 1.0

Software Component HANA CONTENT HBA EWM 100 SP04 (technical name HCO_HBA_EWM) Required Product Version SAP HANA PLATFORM EDIT. 1.0 SPS08, revision 82 or higher

Back-End Prerequisites (Minimum Version) SAP enhancement package 2 for SAP Extended Warehouse Management 7.0 SP00

Authoring Schema SAP_EWM

Installation Information for SAP HANA ANALYTICS FOR PLM 1.0

Instance: HANA Content PLM

(18)

Official Name SAP HANA Live for SAP PLM

Name SAP HANA ANALYTICS FOR PLM 1.0

Software Component HANA CONTENT HBA SAP PLM 100 SP06 (technical name HCO_HBA_PLM) Required Product Version SAP HANA ANALYTICS FOR ERP 1.0 SPS010, instance HANA Content ECC Server Back-End Prerequisites (Minimum Version) SAP ERP 6.06 SP 1 and all equivalent enhancement packages

Instance: PLM Core

See SAP Notes 1913511 and 1998788 .

Installation Information for SAP HANA ANALYTICS FOR INS 1.0

Instance: HANA Content Insurance Cross

Official Name SAP HANA Live for Insurance

Name SAP HANA ANALYTICS FOR INS 1.0

Software Component HANA CONTENT HBA X_INS01 100 SP06 (technical name HCO_HBA_X_INS01) Required Product Version SAP HANA ANALY. ERP EHP4 1.0 SPS08, instance HANA Content for Insurance Back-End Prerequisites (Minimum Version) EHP4 for SAP ERP 6.0

SAP FS-PM 5.1 (SP08). If you have SP01-07, you need to implement SAP Note

1918954

SAP_FSPM Tables for Replication

Note

It is not possible to create analytic privileges for the cross-component view sap.hba.x.ins01.InsurancePaidLossRatioAnalysisQuery with the SAP HANA Live authorization assistant, since the required metadata cannot be maintained for different schemas. Instead, you have to maintain analytic privileges manually with attribute restrictions (based on your business requirements) for the following attributes and assign them to the business user (preferably via role):

ClaimsLogicalSytem (Logicial system for FS-CM) PolicyLogicalSystem (Logicial system for FS-PM) InsurClmAuthsnGrp (FS-CM specific)

InsurClmType (FS-CM specific)

InsurPlcyProdnCtrlAuthsnCat (FS-PM specific) InsrrIDByInsrr (FS-PM specific)

Limiting the combination of the logical system for FS-CM and the logical system for FS-PM allows for the system and the client-specific data restrictions. It is also required to grant the SELECT object privilege for the cross-component view sap.hba.x.ins01.InsurancePaidLossRatioAnalysisQuery to the business user (preferably via role).

Installation Information for SAP HANA ANALY. FOR MANUF. 1.0

Instance: HANA Content Manufacturing

Official Name SAP HANA Live for Manufacturing

Name SAP HANA ANALY. FOR MANUF. 1.0

Software Component HCO HBA OEE 100 SP07 (technical name HCO_HBA_OEE)

Required Product Version SAP HANA ANALYTICS FOR ERP 1.0 SPS010, instance HANA Content ECC Server Back-End Prerequisites (Minimum Version) EHP6 for SAP ERP 6.0

SAP ERP 6.0 SP 19 and all equivalent enhancement packages

SAP_OEE SAP_MII Tables for Replication

Installation Information for SAP HANA ANALYTICS FOR FCC 1.0

Instance: HANA Content Financial Closing Cockpit

Official Name SAP HANA Live for Financial Close

Name SAP HANA ANALYTICS FOR FCC 1.0

Software Component HANA CONTENT HBA SAP FCC 100 SP03 (technical name HCO_HBA_FCC) Required Product Version SAP HANA PLATFORM EDIT. 1.0 SPS08, revision 82 or higher Back-End Prerequisites (Minimum Version) SAP Financial Closing Cockpit 2.0 SP02

(19)

Authoring Schema SAP_FCC Tables for Replication

Installation Information for SAP HANA ANALYTICS FOR ISU 1.0

Instance: HANA Content ISU - ECC

Official Name SAP HANA Live for Utilities, edition for SAP ERP

Name SAP HANA ANALYTICS FOR ISU 1.0

Software Component HANA CONTENT HBA ISU ECC 100 SP04 (technical name HCO_HBA_ISUECC) Required Product Version SAP HANA ANALYTICS FOR ERP 1.0 SPS010, instance HANA Content ECC Server Back-End Prerequisites (Minimum Version) EHP4 for SAP ERP 6.0 (for analytics in the side-by-side scenario)

EHP7 SP02 for SAP ERP 6.0 (for analytics in the integrated scenario) Instance: Utilities/Waste&Recycl./Telco

Installation Information for SAP HANA ANALY. F. CRM-IU 1.0

Instance: HANA Content CRM Utilities

Official Name SAP HANA Live for Utilities, edition for SAP CRM

Name SAP HANA ANALY. F. CRM-IU 1.0

Software Component HANA CONTENT HBA CRMIU 100 SP02 (technical name HCO_HBA_CRMIU) Required Product Version SAP HANA ANALYTICS FOR CRM 1.0 SPS08, instance HANA Content CRM Server Back-End Prerequisites (Minimum Version) EHP1 for SAP CRM 7.0 SP09

Authoring Schema SAP_CRM

Installation Information for SAP HANA ANALY. F. FND 1.0

Instance: HANA Content Foundation

Official Name SAP HANA Live for SAP Business Suite foundation component

Name SAP HANA ANALY. F. FND 1.0

Software Component HANA CONTENT HBA FND 100 SP03 (technical name HCO_HBA_FND) Required Product Version SAP HANA PLATFORM EDIT. 1.0 SPS08, revision 82 or higher Back-End Prerequisites (Minimum Version) EHP4 for SAP ERP 6.0 SP03

Authoring Schema SAP_FND

Installation Information for SAP HANA ANALY. FOR FS-RI 1.0

Instance: HANA Content Reinsurance Man

Official Name SAP HANA Live for Reinsurance Management

Name SAP HANA ANALY. FOR FS-RI 1.0

Software Component HANA CONTENT HBA FS-RI 100 SP02 (technical name HCO_HBA_FSRI) Required Product Version SAP HANA PLATFORM EDIT. 1.0 SPS08, revision 82 or higher Back-End Prerequisites (Minimum Version) FS-RI 6.6

Authoring Schema SAP_FSRI

Installation Information for SAP HANA ANALY. F. CMM 1.0

Instance: HANA Content CMM APPL

Official Name SAP HANA Live for Commodity Management

Name SAP HANA ANALY. F. CMM 1.0

Software Component HANA CONTENT HBA CM APPL 100 SP01 (technical name HCO_HBA_CM_APPL)

(20)

Required Product Version SAP HANA ANALYTICS FOR ERP 1.0 SPS08, instance HANA Content ECC Server Back-End Prerequisites (Minimum Version) EHP7 SP05 for SAP ERP 6.0

Instance: HANA Content CMM EAFS

Software Component HANA CONTENT HBA CM EAFS 100 SP01 (technical name HCO_HBA_CM_EAFS) Required Product Version SAP HANA ANALY. F. CMM 1.0 SPS01, instance HANA Content CMM APPL Back-End Prerequisites (Minimum Version) EHP7 SP05 for SAP ERP 6.0

Instance: HANA Content CMM GLTD

Software Component HANA CONTENT HBA CM GLTD 100 SP00 (technical name HCO_HBA_CM_GLTD) Required Product Version SAP HANA ANALY. F. CMM 1.0 SPS01, instance HANA Content CMM APPL Back-End Prerequisites (Minimum Version) EHP7 SP05 for SAP ERP 6.0

Installation Information for SAP HANA ANALYTICS F. CRMX 1.0

Instance: HANA Content CRM Cross VDM

Official Name SAP HANA Live for SAP CRM and SAP ERP cross-analytics

Name SAP HANA ANALYTICS F. CRMX 1.0

Software Component HANA CONTENT HBA X CRM 100 SP02 (technical name HCO_HBA_X_CRM) Required Product Version SAP HANA ANALYTICS FOR CRM 1.0 SPS09, instance HANA Content CRM Server Back-End Prerequisites (Minimum Version) EHP1 for SAP CRM 7.0 SP12

EHP4 SP00 for SAP ERP 6.0

Authoring Schema SAP_CRM, SAP_ECC

Installation Information for SAP HANA ANALYTICS F. RTL 1.0

Instance: HANA Content Retail

Official Name SAP HANA Live for Retail

Name SAP HANA ANALYTICS F. RTL 1.0

Software Component HANA CONTENT HBA RTL 100 SP03 (technical name HCO_HBA_RTL)

Required Product Version SAP HANA ANALYTICS FOR ERP 1.0 SPS010, instance HANA Content ECC Server Back-End Prerequisites (Minimum Version) SAP ERP 6.0 SP12 and all equivalent enhancement packages

Note

Due to the additional Customizing fields that are required for this VDM, you must apply SAP Note 2000139 .

See SAP Note 2063409 .

Installation Information for SAP HANA ANALYTICS F. REFX 1.0

Instance: HANA Content REFX

Official Name SAP HANA Live for Flexible Real Estate Management

(21)

Software Component HANA CONTENT HBA REFX 100 SP02 (technical name HCO_HBA_REFX) Required Product Version SAP HANA ANALYTICS FOR ERP 1.0 SPS010, instance HANA Content ECC Server Back-End Prerequisites (Minimum Version) SAP ECC for ERP 6.0 EhP7 SP05

Installation Information for SAP HANA ANALYTICS FOR PRA 1.0

Instance:HANA Content PRA VDM

Official Name SAP HANA Live for Production Revenue Accounting

Name SAP HANA ANALYTICS FOR PRA 1.0

Software Component HANA CONTENT HBA PRA 100 ISS (technical name HCO_HBA_PRA) Required Product Version SAP HANA PLATFORM EDIT. 1.0 SPS08, revision 82 or higher

Back-End Prerequisites (Minimum Version) IS-PRA-XT 200 SP00 with activation of business function /PRA/OIL_PRA_RMY2

Authoring Schema SAP_PRA

Installation Information for SAP HANA ANALYTICS FOR GBT 1.0

Instance: HANA Content GBT VDM

Official Name SAP HANA Live for SAP Global Batch Traceability (SAP GBT)

Name SAP HANA ANALYTICS FOR GBT 1.0

Software Component HANA CONTENT HBA GBT 100 ISS (technical name HCO_HBA_GBT) Required Product Version SAP HANA PLATFORM EDIT. 1.0 SPS08, revision 82 or higher Back-End Prerequisites (Minimum Version) SAP Global Batch Traceability 2.0 SP 1

Authoring Schema SAP_GBT

Note

To use the SAP HANA Live content for SAP Global Batch Traceability (SAP GBT), table types are needed for the signatures of the corresponding SAP HANA database procedures. During the deployment of the SAP HANA Live content, these table types are created in the SAP_HBA schema globally using the following naming convention: sap.hba.gbt.type::gbt.<name>*. The expression <name>* corresponds to the name of the table type.

1.6.5 Installation Information for Applications

The applications listed below are available in addition to the virtual data models of SAP HANA Live for the different areas of SAP Business Suite.

Note

To ensure that front-end server cookies are deleted after you have used SAP HANA Live applications, SAP recommends that you close all browser windows after finishing your work. The back-end sessions will then be closed automatically after a timeout period.

Installation Information for SAP GRIR MONITOR 1.0

Instance: GRIR Monitor

Official Name SAP Invoice and Goods Receipt Reconciliation

Name SAP GRIR MONITOR 1.0

Software Component GRIR_MONITOR 100 SP08 (technical name HCO_HBA_APPS_GRIRM) Required Product Version SAP HANA ANALYTICS FOR ERP 1.0 SPS09, instance HANA Content ECC Server

Note

You can only use this application if in Customizing you have not set the summarization of FI data using the purchase order items. You can find the setting in Customizing for Financial Accounting (New) under General Ledger Accounting (New) Periodic Processing Integration Materials Management Perform Document Summarization for Materials Management or in Customizing of Financial Accounting under General Ledger Accounting Business Transactions

Integration Materials Management Perform Document Summarization for Materials Management (transaction OBCY). For the reference transactions Material document (MKPF) and Invoice receipt (RMRP), you must not have an entry with Table Name BSEG and Field Name EBELP.

(22)

Installation Information for SAP GRC ANALYTICS 1.0

Instance: GRC Analytics

Official Name SAP Access Control

Name SAP GRC ANALYTICS 1.0

Software Component GRC_ANALYTICS 100 SP09 (technical name HCO_HBA_APPS_GRCA) Required Product Version SAP HANA ANALYTICS FOR GRC 1.0 SPS09, instance HANA Content GRC

Installation Information for SAP APO ANALYTICS 1.0

Instance: APO Analytics

Official Name SAP Supply Chain Info Center 1.0

Name SAP APO ANALYTICS 1.0

Software Component APO_ANALYTICS 100 SP09 (technical name HCO_HBA_APPS_APOAN) Required Product Version SAP HANA ANALYTICS FOR SCM 1.0 SPS09, instance HANA Content for SCM

Server

Installation Information for SAP MANUF. ANALYTICS 1.0

Instance: SAP OEE Analysis Report

Official Name SAP HANA Live for Manufacturing, option for performance management

Name SAP MANUF. ANALYTICS 1.0

Software Component HCO_HBA_APPS_OEE 1.0 SP07 (technical name HCO_HBA_APPS_OEE) Required Product Version SAP HANA ANALY. FOR MANUF. 1.0 SPS07, instance HANA Content Manufacturing

Installation Information for SAP WORK CAPITAL ANALYTICS 1.0

Instance: WCA Days Sales Outstanding

Official Name SAP Working Capital Analytics

Name SAP WORK CAPITAL ANALYTICS 1.0

Software Component HANA APP WCA DSO 100 SP04 (technical name HCO_HBA_A_WCA_DSO_S) Required Product Version SAP HANA ANALYTICS FOR ERP 1.0 SPS09, instance HANA Content ECC Server

Instance: WCA Days Sales Outstanding UI

Software Components HANA APP WCA DSO UI 100 SP04 (technical name HCO_HBA_A_WCA_DSO_U)

ANALYSIS PATH FRAMEWORK 100 SP04 (technical name HCO_HBA_A_R_APF)

Required Product Version SAP HANA ANALYTICS FOR ERP 1.0 SPS09, instance HANA Content ECC Server

Instance: WCA Days Payables Outstanding

Software Component HANA APP WCA DPO 100 SP04 (technical name HCO_HBA_A_WCA_DPO_S) Required Product Version SAP HANA ANALYTICS FOR ERP 1.0 SPS09, instance HANA Content ECC Server

Instance: WCA Days Payables Outstand. UI

Software Components HANA APP WCA DPO UI 100 SP04 (technical name HCO_HBA_A_WCA_DPO_U)

ANALYSIS PATH FRAMEWORK 100 SP04 (technical name HCO_HBA_A_R_APF)

Required Product Version SAP HANA ANALYTICS FOR ERP 1.0 SPS09, instance HANA Content ECC Server

Installation Information for SAP HANA CONTENT TOOLS 1.0

Instance: Analytical Framework Explorer