EN12020-2001

(1)

ICS 77.150.10

Aluminium und Aluminiumlegierungen – Stranggepresste

Präzisions-profile aus Legierungen EN AW-6060 und EN AW-6063 – Teil 2:

Grenzabmaße und Formtoleranzen

European Standard EN 12020-2 : 2001 has the status of a DIN Standard.

A comma is used as the decimal marker.

National foreword

This standard has been prepared by CEN/TC 132 ‘Aluminium and aluminium alloys’ (Secretariat: France).

The responsible German body involved in its preparation was the Normenausschuss Nichteisenmetalle

(Nonferrous Metals Standards Committee), Technical Committee Strangpresserzeugnisse.

Amendments

DIN 17615-3, January 1987 edition, has been superseded by the specifications of EN 12020-2.

Previous editions

DIN 17615-3: 1976-12, 1987-01.

D EUTSCHE NORM

July 2001

EN 12020-2

{

Continued overleaf.

EN comprises 13 pages.

Aluminium and aluminium alloys

Extruded precision profiles in alloys

EN AW-6060 and EN AW-6063

Part 2: Tolerances on dimensions and form

English version of DIN EN 12020-2

Supersedes DIN 17615-3,

January 1987 edition.

(2)

(3)

English version

ICS 77.150.10

Descriptors:

Aluminium and aluminium alloys

Extruded precision profiles in alloys EN AW-6060 and

EN AW-6063

Part 2: Tolerances on dimensions and form

© 2001.

CEN – All rights of exploitation in any form and by any means

reserved worldwide for CEN national members.

Ref. No. EN 12020-2 : 2001 E

Aluminium und Aluminiumlegierungen

– Stranggepresste Präzisionsprofile

aus Legierungen EN AW-6060 und

EN AW-6063 – Teil 2: Grenzabmaße

und Formtoleranzen

This European Standard was approved by CEN on 2001-02-18.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations

which stipulate the conditions for giving this European Standard the status of a

national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national

stand-ards may be obtained on application to the Management Centre or to any

CEN member.

The European Standards exist in three official versions (English, French, German).

A version in any other language made by translation under the responsibility of a

CEN member into its own language and notified to the Management Centre has

the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, the Czech

Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,

Luxembourg, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland,

and the United Kingdom.

EN 12020-2

April 2001

Management Centre: rue de Stassart 36, B-1050 Brussels

European Committee for Standardization

Comité Européen de Normalisation

Europäisches Komitee für Normung

|

ÈÉË

Aluminium et alliages d’aluminium –

Profilés de précision filés en alliages

EN AW-6060 et EN AW-6063 –

Partie 2: Tolérances sur dimensions

et forme

(4)

3

4

6

7

8

9

11

12

B55EB1B3C7662F79D1B59483A53B9F2F82C98BEEB793808967D17AB2D7EE51B064E643018CF45E92D09F79AD5C46C099A00780FD39BF53519D3B68E663963A8C6663F49643000AFE492C060B0ABE246AF0B86435B4ACB98BE67572D85E845221E409B5BD

(5)

Page 3

EN 12020-2 : 2001

(6)

(7)

Page 5

EN 12020-2 : 2001

(8)

(9)

Page 7

EN 12020-2 : 2001

(10)

(11)

Page 9

EN 12020-2 : 2001

(12)

(13)

Page 11

EN 12020-2 : 2001

(14)

(15)

Page 13

EN 12020-2 : 2001