• No results found

Mechanical and Thermal Properties of Chemically Modified Epoxy Resin

N/A
N/A
Protected

Academic year: 2020

Share "Mechanical and Thermal Properties of Chemically Modified Epoxy Resin"

Copied!
8
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 1. FTIR spectra of (a) IPDI-HTPB-IPDI telechelic polymer in transmission mode, (b) epoxy terminated HTPB based prepolymer
Figure 2. SEM micrograph of (A) 0.3% (B) 0.7% (C) 1.0% (D) 2.0% HTPB modified cured epoxy-amine system
Figure 6. (a) Compressive strength as a function of HTPB in the epoxy-amine system; (b) Samples after compressive testing become barrel shaped with visible large cracks on sides

References

Related documents

By identifying the level of AMH, the number of mature oocytes obtained could be predicted and the appro- priate total amount of gonadotropin dose could be used in the controlled

KNX measuring instruments and meters allow measuring almost any physical quantity, such as electrical voltage, elec- trical current, active power, reactive power, apparent

stutzeri ZH-1 optimal degradation conditions of correction for temperature 36.7°C, oscillator speed 130.00rpm, inoculation concentration 7% and pH 7.0, the degradation

Citation: Aluko Ola (2012): “ The Effects of Arms Smuggling in Trans-Border Planning and Business Activities: The Nigeria – Benin Borders Experience” International Journal

The aim of this field trial was to examine effects of different sources and levels of ZnO added to peat on average daily weight gain (ADG), fecal score in pens and serum and tissue

Focusing on traumatic visits of patients to EDs, in- creased ED utilization was observed between 2001 and 2010 in Taiwan, as evidenced by the increases in the annual number of

Methods: We critically analyzed the Ghana NISPPI ’ s sensitivity to ethics issues to determine how well it reflects ethical commitments and principles identified in our review of

The proposed LNA shown in Fig.1 consists of three cascaded stages, a chebyshev BPF, a cascode amplifier followed by an inductive inter-stage network and a common source amplifier