• No results found

Real time 3D Face Recognition using Line Projection and Mesh Sampling

N/A
N/A
Protected

Academic year: 2020

Share "Real time 3D Face Recognition using Line Projection and Mesh Sampling"

Copied!
9
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 2.  Point cloud and triangulation from the detected stripe pattern in 2D
Figure 5: Comparative analysis of noise removal around the eyes. The white model shows the original mesh; red: fitting an elliptical mask around the eyes and filling with a spherical surface centered at 40mm behind the model; yellow: punching an elliptical
Figure 8. Sampling method: a mask (white)  is cut from the model (blue). The mask contains 900 points whose depths are used for recognition
Figure 10. Sensitivity to variations of 20 pixels in eye location
+3

References

Related documents

There is no limit to the number of Licensed Users who may use this Service provided that: (a) each Licensed User opens no more than 50 (fifty) Research Notes; and (b) such use

Substitution of amino acid residue V1213 in the helicase domain of the genotype 3 hepatitis E virus reduces virus replication RESEARCH Open Access Substitution of amino acid residue

Within the theoretical frame- work, I derive a dynamic gravity equation, and discuss the relationship between the estimated trade persistence coefficient and the adjustment rate.. 2.1

Earth Planets Space, 63, 275?287, 2011 Conventional N , L , and R tests of earthquake forecasting models without simulated catalogs Masajiro Imoto1, David A Rhoades2, Hiroyuki

The transfection efficacy of the PEI-TPP nanocarrier to deliver pDNA was evaluated in HeLa, HEK293T, HepG2, and MCF-7 cell lines and primary rOASFs.. After 36 hours, the

Winning strategies ratio for no model was lower than 0.778 and average strategies pro fi tability in the portfolio was always higher than the pro fi tability obtained by

[r]

Integration of thermal energy storage prevents the effect of temperature fluctuations by solar irradiation and increases drying efficiency during energy release