• No results found

Remote Laser Welding with High Power Fiber Lasers

N/A
N/A
Protected

Academic year: 2020

Share "Remote Laser Welding with High Power Fiber Lasers"

Copied!
7
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 2. Typical elements of a scan head [9].
Figure 4. RLW cell with a 5 KW IPG fiber laser [24].
Figure 5. RLW of limited working zone [11].
Figure 10 shows the effect of focal position on the penetration in RLW of steel with disk lasers
+2

References

Related documents

In short, the governance structure implementation in Indonesian banking industry, in term of board size, it is not proven that foreign-owned commercial banks and join-venture

In addition to the Crash Recovery System ® information, Moditech Rescue Solutions BV off ers a number of training courses on emergency response to incidents involving modern

Keywords: glaciohydrological model, SWIM, Aksu basin, Rhone basin, glacier mass balance modelling5. ∗

Particularly, Skypeness would be able to detect Skype traffic at more than 300 Gb/s with notable accuracy, given a sampling rate of 1 / 8 and its processing capacity of 45 Gb/s,

JShield implements obfuscation to a given source code and produces obfuscated source code which is more difficult to reverse engineer than its original version.. To test

Designs to be implemented on an FPGA are: a power board management module, an FPGA-based GPS satellite acquisition module that performs faster than comparable soft- ware running on

Concurrent Change in Attachment Style and Depressive/Anxiety Symptoms Increasing levels of attachment avoidance significantly predicted higher levels of depressive symptoms in

See Profile on Page 161 & Advertisement on the Divider of Brand Index Section, in the Starting Pages..