• No results found

Computational fluid dynamics modelling of an entire synchronous generator for improved thermal management

N/A
N/A
Protected

Academic year: 2020

Share "Computational fluid dynamics modelling of an entire synchronous generator for improved thermal management"

Copied!
13
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 2: Schematic of machine geometry model
Figure 3: Interior surface labels of the interpolar spaces shown on a midway axial plane through generator
Figure 6: A graph to show the validation of CFD torque results using experimental data
Figure 8: Percentage contribution to the pressure torque by generator component

References

Related documents

ical structure (noise, finite encoders resolution, quantization effects, etc.). The generated control inputs are displayed in Fig. We can see that the amplitudes of the torques of

If one side of the NMEA signal is on chassis then you can use ether the BNC coax connector PS/ AF chassis in the centre section or the terminal ST12 on the connection board 1 in

Company A is a family owned business working, principally, in housing, retail and other construction (and re-fit), interiors and land development. Key clients include

presently doing rotation in the department of General Surgery. Final year MBBS students who have already completed one posting in General Surgery were included. Students who did

sativa as a host for the biosynthesis of omega-3 LC-PUFAs has previously been demonstrated for the expression of the conventional D 6-pathway (Petrie et al. , 2014); success

Prevalence of overactive bladder syndrome (OABS) among women with gynaecological problems and its risk factors in a tertiary hospital, Negeri Sembilan, Malaysia: Implication

tax dollar. The expansion of government activities has been at the State and national level... Government has tended to move away from the people.. ‘Then, too, with the general

In this short review, we compile data from the literature pertaining to impact cratering experiments on porous targets, and summarize the ratio of spall diameter to pit diameter,