• No results found

Low Power Test Pattern Generation

N/A
N/A
Protected

Academic year: 2020

Share "Low Power Test Pattern Generation"

Copied!
5
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 1: VLSI design flow [1]
Figure 2: 8 bit Standard LFSR test pattern generation
Figure 3: 8 bit Low power LFSR test pattern generation
Figure 4: Test pattern generated from 36 bit Standard LFSR

References

Related documents

As shown in the block diagram of the setup (figure 3.1), the RTC board needs to be eventually used in a larger system setup in the lab for achieving the power electronics

Reproduced with permission of the copyright owner. Further reproduction prohibited without permission... Effect of grazing angles on optical parameter.. for two different

To examine the chromosome segregation defect caused by the absence of Acb1 more closely, we imaged live wild type, acb1D , and rec12D control cells carrying a GFP label on the arm

The network structure is split into several clusters and these clusters square measure maintained dynamically and if a node is additional or left a selected cluster then this sort

After analysing and studying the data of NH10, we found that for a given road on large scale construction and its management is important. The risk associated

Moreover, quasi-static results revealed that parameters of energy absorption enhanced for partially wrapped and fully wrapped aluminium tubes as compared with

a) This paper presents an alternative analytical solution to the system of pressure equations of horizontal wells in a dual-porosity, dual-permeability naturally fractured

the federal circuit courts, finds that conservative judges are more likely to deny standing to.. plaintiffs asserting environmental claims than