OXYGEN
WORLD WIDE
SALES
Eryiğit Medical Devices Inc. has been established in 1991 Ankara Turkey. Our company produces technologies for healthcare sector since from its establishment. We pro
-duce high quality and innovative products to meet our cus
-tomers needs and serve healthcare sector in Turkey and worldwide.
We are the first company in its field in Turkey to adopt quality management system. We obtained CE certification and TIP Test validation for our products.
We have ISO 9001, ISO 13485, ISO 14001, EN 285 PROD
-UCT CERTIFICATE, MDD 93/42/EEC MEDICAL DEVICES CE CERTIFICATE, PED 97/23/EEC PRESSURIZED VESSELS CE CERT, 17665-1 INSTALLATION VALIDATION, STEAM STERIL
-IZER TIP TEST, WASHER TIP TEST, PLAZMA STERIL-IZER TIP TEST.
We serve the market with direct sales and via dealers & sub-dealers all around the world.
We as well supply technical service to the hospitals and our sub-dealers sub-dealers via our professional well trained engineers and technicians. Our technical service has been certified by the Turkish Standards Institution in accordance with EU standards.
PRODUCTION, SALES AND SERVICE OF MEDICAL DEVICES Eryigit offers a product portfolio with a wide variety. We produce and market Steam Sterilizers, Hydrogen Peroxide Gas Plasma Sterilizers, Pharmaceutical Sterilizers, Waste Sterilizers, Washer-Disinfectors, Oxygen Production and Storage Systems, Operating Tables with complete range of accessory, Examination Tables, Gynecological and Urologi
-cal Examination Tables, Delivery Tables and stainless steel hospital equipment. We also design and install CSSD Units and Water Purification Systems.
OUR PRODUCT CATEGORIES:
• Sterilization Systems • Disinfection Systems • Operating Room Systems • Oxygen Generating Systems • Water Treatment Systems • Hospital Equipment
• All supplementary consumables, accessories and spare parts Eryigit supplies 1800 hospitals in Turkey and around the world.
• Over the last 27 years, these hospital have been using Eryigit Devices without any problems. We have success
-fully completed installation of central sterilization units in both state-owned and private hospitals in Turkey and all around the world. The reference list is available in our web page.
CONTENTS
Contents
Advantages
Areas of Use
Medical Oxygen Production and Storage System
Oxygen Generation System Formation
Oxygold Monitor Parameters
Optional Production Options
Ambulance Model
Mobile Model
Container Model
Hospital Standard Model
Oxygen Tube Filling Systems
General Information
OXYGOLD
OXYGEN
02
03
04
05
06
07
08
09
10
11
12
13
15
ADVANTAGES
Oxygen gas is vital in many sectors. Incorrect use, storage and transport of oxygen gas, which is common, may result in damages and even accidents, sometimes death. Today, oxygen is supplied as liquid in a tank and filling tube. Liquid oxy
-gen is supplied by means of transporting pressurized cylinders or by filling into large storage tanks in the area to be used. Transport with large, heavy and pressurized tubes is risky.
Oxygen cylinders are dangerous because they are high pressure, and have the potential to burn and explode.
Expensive: Transportation is carried out only through but the road and seasonal conditions may be risky and increase the costs, as well as labor costs.
Dangerous: There is no leakage warning in the tubes. Liquid oxygen and cylinders are explosive. They are stored in pressurized tubes by compres
-sion. Explosion in the event of contact with flammable substances (oil, etc.) may have fatal consequences.
High Losses: 20% to 30% losses are observed in liquid oxygen in tubes and tanks due to temperature changes.ubes and tanks due to temperature changes.
In addition to these OXYGOLD (Medical Oxygen Production and Storage
System) is:
PRACTICAL
ECONOMICAL
HEALTHY
SAFE
No transport, shipping required; produces oxygen up to 95% (± 3%)
purity. With the medical oxygen system
you can produce your own oxy
-gen. Our air compressor, togeth
-er with the refrig-erated dry-er and filtration system, takes the air and separates it from other gases with nanotechnology. This separation is carried out with a synthetic zeolite material which does not need to be replaced. The process is completely automated, which makes it reliable and virtually maintenance-free. The medical oxygen production and storage system, which an aver
-age hospital needs, is able to amor
-tize itself in approximately one year when compared to liquid oxygen Medical Oxygen Production and
Storage Systems works at 4-6 Bar
pressure, fully automated, reliable. High quality medical filters are
used.
and cylinders. With the money you will pay for liquid oxygen and tubes in a year, you will be free for many years and you will have oxygen free at the purity rates you want.
AREAS OF USE
HEALTH ORGANIZATIONS
HEALTHY LIFE CENTERS
INDOOR ENVIRONMENTS
INDUSTRIAL AREASI
Hospitals Polyclinics Ambulances
Hyperbaric oxygen therapy centers Veterinarians
Mobile Hospitals
Spa and beauty centers Beauty and slimming centers Dermo cosmetic centers Ozone treatment centers
Educational institutions Gyms
Hotel, meeting and conference halls Shopping centers
Cinemas
Commercial buildings
Sterilization of the environment by ozone gas
All factories using industrial oxygen gas Paint factories using volatile dyes Casting factories
Glass factories Textile factories
MEDICAL OXYGEN PRODUCTION
AND STORAGE SYSTEM
PRODUCTION
CONTROL
STORAGE
ERYİĞİT Medical Oxygen Production and Storage System can be used in both medical and industrial fields. Only uses air together with our air com
-pressor, refrigerated dryer and filtration system and separates oxygen from other gases with nano technology. This separation is carried out with a fixed synthetic zeolite material which does not need to be replaced. The process is fully automated. It is ensured that it is virtually maintenance-free. The transmission pressure is adjusted to your needs from 0 bar (g) to 6bar (g). The oxygen produced becomes ready for use in the range of 90% -93% -95% purity. 99% purity range can be produced specially upon request.
OXYGOLD Oxygen Production and Storage Systems control software is im
-portant. Especially in medical applications, the purity level of oxygen should not fall below a certain level. Our products are compliant with to the Medi
-cal Device Directive (93/42 / EEC) and T.C. the 2012/7 directive issued by the Ministry of Health Pharmaceuticals and Medical Devices Agency of Republic of Turkey. Medical regulations state that medical oxygen for medical use should not fall below 90%. Therefore, when the oxygen purity of all OXY
-GOLD models is below 90%, the system monitor and management monitor give audible and visual warning. The system automatically switches itself off without interference and prevents any damage.
OXYGOLD models have oxygen storage tanks. The system automatically stores the pure oxygen it produces and makes it ready for use.
!"#$%&%'()*+,'
$-./%(
renkli çalışma göstergesi ve test modu oksijen sensörü
0!1$2344$56
İnternet’ile bilgisayara bilgi aktarımı
Toplam çalışma ve durma zamanı
Oksijen saflığı dijital ve grafiksel göstergesi Hata & Uyarı alarm kayıt bilgileri izlenmesi Kolonlardaki PSA çalışmasında dijital, zaman ve grafiksel basınç göstergesi
Servis Bilgisi
!/saat veya Litre/Dakika olarak gösterilir
Oksijen tank basıncı anlık, grafik ve sayısal göstergesi
PLC
monitöründen izlenmesi
OXYGEN GENERATION SYSTEM
FOR-MATION
Bar (g), mode oxygen sensor Us
-age Pressure: 10 Bar (g)) 22. Liquid relief valve 23. Safety valve
24. Sterile filter (0.001 micron) 25. High pressure automatic drain
valve v Check valve
26. Air pressure regulator compres
-sor
27. electronic control panel 28. Oxygen Generator Stand 29. Information transfer over the 30. Internet
9. Heat thermometer (Optional) 10. N2 exhaust
11. Oxygen generator
12. Management monitor, PLC elec
-tronic
13. Control panel 7 ”color touch 14. Atmospheric assembly and chem
-ical
15. Medical pre-filter change indica
-tor High pressure automatic drain safety valve
16. CE emblem, test and working 17. Pressure label
18. Air pressure control valve with 8 19. SYSTEM MAP
20. Colored operating indicators and test
21. Oxygen tank (Test pressure: 16 1. Compressor
2. Pneumatic liquid waste (test con
-trolled)
3. Air dryer (Automatic water and oil drainage unit)
4. Particulate filter (0.1-0.01 mi
-cron)
5. Automatic oil and liquid drainage pump with thermostat control, heater
6. Activated carbon filter (0.03 mi
-cron)
7. Airtank (Test pressure: 16 Bar (g), Usage pressure: 10 Bar (g)) Oil and moisture indicator at the in
-put of oxygen generator (220 V - 50Hz) Pressure manometer 8. Power supply UPS 1500 VA
Date Time
Total work time
Oxygen consumption of the hospital is displayed by flowmeter in Nm³/hour or lt/min
Manuel or automatic start Pin code for buttons
Digital display of Oxygen flowmeter (l/m)
Total oxygen production display in Nm³/hour or lt/min Service information
Oxygen tank continous pressure , graphical and nu
-meral display
Error & alert records display
Oxygen purity digital & graphical display
Digital time and graphical pressure display of PSA working on colons
Digital display of oxygen pressure Adjustable and program
-mable control panel software (PLC)
Adjustment time period of air control valves from the con
-trol unit
Oxygen output pressure control from control panel Water and dust proof, lockable control panel
Control monitor displaying valves, pressures, oxygen puri
-ty amount and liquid drain
!"#$%&%'()*+,'
$-./%(
renkli çalışma göstergesi ve test modu oksijen sensörü
0!1$2344$56
İnternet’ile bilgisayara bilgi aktarımı
Toplam çalışma ve durma zamanı
Oksijen saflığı dijital ve grafiksel göstergesi Hata & Uyarı alarm kayıt bilgileri izlenmesi Kolonlardaki PSA çalışmasında dijital, zaman ve grafiksel basınç göstergesi
Servis Bilgisi
!/saat veya Litre/Dakika olarak gösterilir
Oksijen tank basıncı anlık, grafik ve sayısal göstergesi
PLC
!"
Ortam der
ecesi +15 çıkış sı
c
aklığı
#$"
4-8 bar ar
ası
ç
alışma basıncı
##"
Kompresör e
k
str
a soğutma
f
anı
IP 55 koruma
%"
Gazlı soğutma
!"
Çevre dos
tu
gaz
#$"
Ort
alama +3 ( 2) çiğlenme nok
t
ası
12.
Hav
a içerisinde 3m
g/m
3y
ağ buharı
13.
Hav
a soğutmalı k
ompresör
#&"
24 sa
at ç
alışabilme
oz
eliği
'
(
STANDARD COMPRESSOR & DRYER
COMPRESSOR PROPERTIES
Copressor Properties
Optional Dryer Properties
Optional Compressor Properties
Dryer Properties
1. Digital control panel: • Total operating time
• Calendar and clock information
• Compressor failure record, can record the last 10 errors • Operating temperature
• Setting upper-lower limit pressure values • System information
• Error alarm information • Maintenance warning
2. Power supply 380V 50Hz
3. Screw block
4. Noise level 70dB
5. Working pressure 7-10bar (g)
6. CE certificate
7. Automatic and manual programming
8. Automatic switching on and off when electricity is cutoff or connected
9. Ambient temperature + 15C outlet temperature
10. Working pressure between 4-8 Bar
11. Compressor extra cooling fan
12. 3 mg / m3 oil mist in air
13. Air cooled compressor
14. 24h continuous operation
1. Thermostatic control and heating of drainage to prevent freezing in cold weathers.
2. Display of moisture levels
3. Operation service information
4. Error information
1. Direct coupled type compressor
2. Inverter compressor
3. Compressor motors IE3, IE4 efficiency class IP55 protection
4. Automatic dehumidification system
5. Sound and light alarm information
6. Built-in dryer unit operation and service informa
-tion
1. On-Off button
2. Dryer inlet filter
3. Analog operation information
4. Dryer motor overheating protection circuit
5. Automatic water discharge outlet
6. Operation with 220V 50Hz
7. CE certificate
8. Gas cooling
9. Environment friendly gas
Türkçe vey
a İngili
z
ce ola
rak mesaj
gönderilmesi, ışıklı
ve
sesli alarm
v
erile
r
ek du
r
durulması, arı
z
a gideriliğinde
Fl
owmetr
e ile o
k
sijen çıkış mi
kt
arının ölçülmesi, lit
r
e/dak.
veya m
!/saa
t ola
rak ok
sijen akış mi
kt
arının
ve hast
ane
!
vey
a diji
t
al o
k
sijen kütle akım s
ay
cında g
öst
erilmesi
Ok
sijene uymlu ele
ktr
onik
ko
n
tr
ollü
st
eril filt
re Ma
x.
0,003 mg
/m
!y
ağ buharlı
20.
Epok
si
k
aplı o
k
sijen
t
ankı
Oksijen sisteminin kabin içine montaj edilmesi
Kompresör kapasitesinin max. iki kat kapasitesinde hava kurutucusu Yedek kurutucu ve kompresör ilavesi
Min. 10 m!/dak. bakteri steril filtresi
OPTIONAL
Optional Compressor Properties
Dryer Properties
1. When the pressure drops or the levels drop below 90%, sending messages in Turkish or English, stopping, setting off light and sound alarms, starting automati
-cally when the error is corrected
2. Low or high oxygen pressure
3. Low or high temperature
4. High humidity rate / Humidity and alarm indicator / Level filter indicator / Graphical display on monitor
5. Measurement of oxygen output with flowmeter, dis
-play of oxygen (flow) amount in liters / minute and hospital oxygen consumption m3 on the management monitor or digital oxygen lute flow counter
6. Compressor pressure display on the monitor
7. Display of compressor temperature and failure on the management monitor
8. Digital display of oil and water alarm information on the oxygen generator inlet filters in writing on the monitor.
9. Display of moisture in the management module
10. Measurement of oxygen purity with atmospheric de
-vice and Zirconium sensor
11. Automatic oil and liquid drainage pump with thermo
-stat controlled heater
12. Wireless data sharing
13. Particle filter, pre-filter electrical change time informa
-tion or propor-tional informa-tion monitor
14. Oil and humidity indicator with sound and light alarm system at the entrance to the oxygen generator (220V 50Hz).
15. Thermometer
16. Step automation system
17. Display of air tank pressure on management module
18. Monitoring and recording of oxygen system informa
-tion from hospital computer
19. Oxygen compatible sterile filter with electronically controlled max. 0.003 mg / m3 with oil vapor
20. Epoxy coated oxygen tank
• Monitoring and recording of oxygen system data from hospital computer
• In case of failure of the air compressor, a light and sound warning is given in Turkish. It works automatically when the error is corrected
• Display of pneumatic valves with different colors on the monitor • Mounting of oxygen system in the cabinet
• Filter status: When the filter is full, digital change indicator gives light and sound warning. • Low or high oxygen pressure
• Low or high temperature
• Automatic changeover system and sound alarm • Max. double capacity air dryer
• Spare dryer and compressor addition • Min. 10 m3 / min bacteria sterile filter
AMBULANCE MODEL
AMBULANCE MODEL ADVANTAGES
Oxygen levels in cylinders used in ambulances may be lowered at any time by a leak or breakdown, resulting in a danger to the patient’s life. In addition, there are risks in keeping oxygen tubes in the ambulance in case of an accident and the cylinders must be kept full. The necessity of frequent control of the levels and the exhaustion of oxygen in long-distance patient transfers causes difficulties.
MODEL A (OXYGOLD AMBULANCE)
Capacity 10 L/dk (min)
Flow Adjustment 1-10 L/dk(min)
Oxygen Purity %95 ±3
Exit Pressure 4-6 Bar
Capacity (m3/h) 0,6 m3/saat (hr)
Power Supply 12V-24V-160A-110A
24V Current 30A (24 Volta)
12V Current 50A (12Volta)
Power Supply Source Storage Battery
Size 105x60x27cm
Weight 78 kg
Noise Level 55 dB
Oxygen Tank Capacity 8L
Air Pressure 4-6 Bar(g)
Vacuum (-650) mm Hg
Manometer 0-10 Bar(g)
Inverter Power 2000VA INVERTER - POWER 24 V/220V
SAFE: No risk of falling
PRACTICAL: No filling required
HANDY Does not leave the patient without oxygen since there is a backup system
ERGONOMIC: No handling required
LUCRATIVE: Production loss is 0 thanks to 24/7 operation
SAFETY: Even if the return on investment period is longer, human life is important
RUGGED: The whole system is guaranteed for 2 years and has 10 years spare parts warranty.
AUTOMATIC: Automatically shuts down and switches to safe mode when oxygen purity drops below
90%
QUALITY: Each part of the entire system has CE certification and the system is fully certified with CE certification
GOLDBERG MOBILE OXYGEN
PRODUCTION MODELS
MOBILE SYSTEMS
It is suitable for small hospitals, mobile hospitals, emergency services, small capacity polyclinics and intensive care units. Its small size provides ease of use. OXYGOLD provides high purity in mobile, the OXYGOLD mobile model can achieve 95% (±3) high purity oxygen production in the OXYGOLD mobile model as in our other oxygen production systems, unlike many other mobile oxygen production systems.
• Mobile systems have the ability to operate 24/7
• Mobile system investment return on investment period varies between 12-24 months depending on usage • The whole system has 2 years warranty and 10 years spare parts warranty.
• Automatically switches off when oxygen purity drops below 90% and switches to safe mode, giving sound alarm. • Every part of the whole system is CE certified and the system is certified as a whole by CE certificate
MODEL OXYGOLD-M-10 OXYGOLD-M-20 OXYGOLD-M-30 OXYGOLD-M-40
KAPASİTE 10 L/dk (min) 20 L/dk (min) 30 L/dk (min) 40 L/dk (min)
AKIŞ AYARI 1-10 L/dk (min) 1-20 L/dk (min) 1-30 L/dk (min) 1-40 L/dk (min)
OKSİJEN SAFLIK %95 ±3 %95 ±3 %95 ±3 %95 ±3
CİHAZ ÇIKIŞ BASINCI 4-6 Bar (g) 4-6 Bar (g) 4-6 Bar (g) 4-6 Bar (g)
KAPASİTE M3/SAAT 0,6 m3/saat (hour) 1,2 m3/saat (hour) 1,8 m3/saat (hour) 2,4 m3/saat (hour)
OKSİJEN GÜÇ KAYNAĞI 230V 50Hz %10 230V 50Hz %10 230V 50Hz %10 230V 50Hz %10
ÇALIŞMA AMPERİ 4A 5A 6A 6A
START AMPERİ 7A 8A 9A 9A
ELEKTRİK TÜKETİMİ 0,92 kW/saat (hour) 1,0 kW/saat (hour) 1,1 kW/saat (hour) 1,2 kW/saat (hour)
GÜRÜLTÜ SEVİYESİ 54 dB 54 dB 56 dB 56 dB
TOKSİJEN TANKI 10 L 40 L 100 L 400 L
HAVA BASINCI 4-6 Bar (g) 4-6 Bar (g) 4-6 Bar (g) 4-6 Bar (g)
MANOMETRE 0-10 Bar (g) 0-10 Bar (g) 0-10 Bar (g) 0-10 Bar (g)
KULLANIM ŞEKLİ O2 BS Priz O2 BS Priz O2 BS Priz O2 BS Priz
Model Capacity Flow Adjustment Oxygen Purity Exit Pressure Capacity (m3/h) Oxygen Power Supply Working Current Start Current Elektric Consumption Noise Level Oxygen Tank Air Pressure Manometer Usage
CONTAINER MODEL
It is recommended for environments where there is a need for temporary or portable oxygen production, especially in some hospitals with space problems for oxygen system. It is easy to use because it is portable. The system is also rec-ommended for in places where there is very low space. It is easily installed on the roofs of the hospitals or any other area and it is not affected by the weather conditions. It is put into service with all the equipment for Hospitals established in extraordinary situations such as disaster. It is practical and ergonomic for the supply of oxygen needs of hospitals and facilities in the process of renovation.
• Our Container Model systems produce 90%, 93%, 95% ±3 purity oxygen. • Oxygen production system works in the pressure range of 4-6 bar. • All OXYGOLD models we produce are suitable for Container Model. • Production loss is 0 thanks to 7/24 operation.
• Return on investment period varies between 12-24 months according to usage. • The whole system has 2 year warranty and 10 year spare parts warranty.
• Since it is manufactured according to the extremes in temperature and humidity in the areas where it will be in
-stalled, resistant to outdoor weather conditions.
• Automatically shuts down when the oxygen purity drops below 90%, switches to safe mode and beeps. • Each part of the whole system has CE certification and the system is certified as a whole by CE certification.
KONTEYNER
KAPASİTESİ
UYGULANAB
İ
LEN MODELLER
20’LİK Oxy-Gold 2 Oxy-Gold 3 Oxy-Gold 4 Oxy-Gold 5 Oxy-Gold 7 Oxy-Gold 11 Oxy-Gold 15 Oxy-Gold 18 Oxy-Gold 22
40’LIK Oxy-Gold 30 Oxy-Gold 37 Oxy-Gold 45 Oxy-Gold 55 Oxy-Gold 75
2X40’LIK Oxy-Gold 90 Oxy-Gold 110 Oxy-Gold 132 Oxy-Gold 160 Oxy-Gold 200 Oxy-Gold 250
MODELS
Container Capacity 20 40 2x40!"#$%&'()%*$+",(+","-&./-0
1'"%.-$%(%"*$'2"*$,#"(3"(4"'2"*$,#"(5$6&7(/,5"#",
programlama verilerine göre ç
alışmalarına d
ev
am ede
r.
GOLDBERG Hastane STANDAR
T modellerimiz 4,5 - 6,5
Bar (
g) basınç a
r
alığında
ç
alışma
kt
adı
r.
STANDARD MODELS
• GOLDBERG Hospital Standard models operate in pressure range of 4-6 Bar (g).
• Each part of the whole system has CE certification and the system is certified as a whole by CE certification. • The whole system has 2 year warranty and 10 year spare parts warranty.
• It produces oxygen in the range of 90%, 93%, 95%±3 purities.
• No transportation and labor costs. It produces as much oxygen as you need, and goes into standby mode when you don’t need it.
• Compressor pressure is 10 Bar (g). The maximum noise level is (±5) 70 dB.
• Capable of producing between 10 L / min - 2500 L / min. Above 2500 L / min capacity may be produced on request. • GOLDBERG is able to produce oxygen continuously thanks to its ability to work 24/7.
• Return on investment period varies between 12-24 months according to usage.
GOLDBERG OXYGEN FILLING
SYSTEMS
Oxygen Production and Storage Systems produced under ERYİĞİT Medical OXYGOLD brand has become a reliable brand all over the world. By adding Oxygen Tube Filling systems to our well-known brands (Oil Free High Pressure Oxygen Com
-pressor), we offer solutions for filling your cylinders in the range of 100-200 Bar reliably. • Our Oxygen Tube Filling systems operate completely automatically.
• You can fill your tubes yourself, regardless of tube filling suppliers.
Warning: The selection of Oxygen Oil Free High Pressure Compressor can be changed according to the requests of our customers.
AIR COMPRESSOR AIR TANK AIR DRYER OXYGEN GENERATOR OXYGEN TANK SPARE CONTAINERS
CYLINDER FILLING SYSTEM OPERATING ROOM
INTENSIVE CARE PATIENT BED
INCUBATOR
OXYGEN CAPACITY, FLOW
& PURITY TABLE
MODEL
FLOW m3/hr AIRNm3/MİN 7BAR OXYGEN TANK LITER OXYGEN PURITY 0.90% 0.93% 0.95%
Nm3/hr L/min Kilo/hr Nm3/hr L/min Kilo/hr Nm3/hr L/min Kilo/hr
OXY-GOLD-M-10 0,60 10 0,85 0,59 9,8 0,84 0,55 9,2 0,78 0,15 150 OXY-GOLD-2 1,20 20 1,71 1,18 19,7 1,68 1,16 19,4 1,65 0,34 150 OXY-GOLD-3 1,80 30 2,55 1,77 29,4 2,52 1,65 27,6 2,34 0,45 300 OXY-GOLD-4 2,40 40 3,43 2,08 34,7 2,97 1,93 32,2 2,76 0,55 400 OXY-GOLD-5 3 50 4,25 2,95 49 4,2 2,75 46 3,9 0,75 400 OXY-GOLD-7 3,6 60 5,1 3,54 58,8 5,04 3,3 55,2 4,68 0,90 400 OXY-GOLD-11 6,30 105 9,00 6,00 109 8,58 5,72 95 8,17 1,65 1000 OXY-GOLD-15 9,39 156 13,42 9,00 150 12,87 8,67 144 12,39 2,50 1000 OXY-GOLD-18 11,77 195 15,40 10,11 169 14,45 9,36 156 13,40 2,86 1000 OXY-GOLD-22 13,72 229 19,62 12,89 215 18,43 11,93 199 17,05 3,20 1000 OXY-GOLD-30 18,47 308 26,41 17,35 289 24,81 16,06 268 22,96 4,85 1500 OXY-GOLD-37 24,07 400 34,42 22,60 377 32,31 20,93 349 29,93 5,02 2000 OXY-GOLD-45 28,50 475 40,75 26,77 446 38,28 24,78 413 35,43 6,00 2000 OXY-GOLD-55 41,17 686 58,87 38,66 644 55,28 35,80 597 51,20 9,00 3000 OXY-GOLD-75 50,67 845 72,45 47,59 793 68,05 44,06 734 63,00 11,20 4000 OXY-GOLD-90 58,06 968 83,02 54,53 909 77,98 1,65 841 72,20 14,00 5000 OXY-GOLD-110 69,99 1167 100,00 65,73 1096 94,00 1,93 1014 87,03 15,50 5000 OXY-GOLD-132 78,12 1302 111,71 73,36 1223 104,9 2,75 1132 97,12 17,70 8000 OXY-GOLD-160 98,70 1645 141,20 92,70 1545 132,6 3,3 1430 122,7 23,00 8000 OXY-GOLD-200 118,23 1970 169,00 111,04 1850 158,8 5,72 1713 147 26,00 10000 OXY-GOLD-250 147,79 2463 211,30 138,80 2313 198,5 8,67 2142 183,8 33,00 1000 OXY-GOLD-P-10 0,70 11,7 1,00 0,65 10,8 0,93 9,36 9,2 0,86 0,14 5 OXY-GOLD-S-10 0,70 11,7 1,00 0,65 10,8 0,93 11,93 9,2 0,86 0,14 5 OXY-GOLD-A-10 0,70 11,7 1,00 0,65 10,8 0,93 16,06 9,2 0,86 0,14 5 OXY-GOLD-K-7 13,72 60 5,1 3,54 58,8 5,04 20,93 55,2 4,68 0,9 400 OXY-GOLD-K-30 18,47 308 26,41 17,35 289 24,81 16,06 268 22,96 3,85 1500
