• No results found

Fabrication and Optical Characterization of Zinc Oxide Nanoparticles Prepared via a Simple Sol-gel Method

N/A
N/A
Protected

Academic year: 2020

Share "Fabrication and Optical Characterization of Zinc Oxide Nanoparticles Prepared via a Simple Sol-gel Method"

Copied!
7
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Fig. 1. XRD patterns of ZnO nanoparticles at calcined temperature in 400, 500 and 600 οC
Fig. 2a. SEM images of ZnO nanoparticles at calcined temperature in 400οC.
Fig. 2b. SEM images of ZnO nanoparticles at calcined temperature in 500 οC.
Fig. 3. EDX spectrum of ZnO nanoparticles at calcined temperature in 500 οC.
+2

References

Related documents

No Salutation First Name Last Name Company Name Job Title Business Address 1 Business Address 2 Business Zip Code Business Phone 656 Bapak Syamsul Bahri MINDSHARE Media Executive

Titanium oxide nanoparticles were prepared via sol-gel method using the titanium isopropoxide, double distilled water and isopropyl alcohol as the starting materials.. 100 mL

de vida las criaturas de poco peso al nacer o de corta gestación, es más, hasta las criaturas.. muy pequeflas con peso de 1,500 gm

Fig 3: Effect of Kollidon® SR on drug release in water from propranolol Fig 4 : Effect of Kollidon® SR on diffusion controlled drug release in water 10mg tablets manufactured

We use a normal-mode analysis to investigate the impacts of the horizontal and vertical discretizations on the numerical solutions of the quasi-geostrophic anelastic baroclinic

The cadmium (Cd) doped zinc oxide (ZnO) nanoparticles were prepared under room temperature by changing the doping concentration using simple chemical method.. The

The present document describes the specifications for the structure of the data frames (Chap- ter 3), the use of keywords in ESO FITS files (Chapter 4), the content of the log