Protection Design Guide for Portable Electronics

Power over Serial Enable/Disable jumpers (per-port) 4-port DB44 to DB9MX4 Breakout Cable Aux Power Source Selector SP4 Aux Power Connector S1~S4 Internal header Connector

Pilot protection allows over-reaching zones of protection to ensure full protection of the line as well as high speed tripping.. Transmission

nematodes (epn) to resist benzoxazinoids that are sequestered from maize roots by the western corn rootworm (WcR, Diabrotica virgifera virgifera; coleoptera: chrysomelidae),

Moxa’s new NPort® A series of serial device servers sets itself apart from other solutions with built-in IEC 61000-4-5 rated surge protection on the serial line in addition to

These robust diodes can safely absorb repetitive ESD strikes above the maximum level specified in the IEC 61000-4-2 international standard (Level 4, ±8kV contact discharge)

• Outputs for Hall sensor and encoder (line driver) are protected by ESD protection diodes designed for an ESD level of at least 2 kV according to EN 61000-4-2.. • In addition,

Comparison of the requirements of IEC 61000-4-30 Standard to high-voltage scale voltage converters, when measuring power quality indices, with the characteristics of high

Video Links, or serializer/deserializer (SerDes), are umbrella terms for devices using serial interfaces to transmit data that is available from a parallel data stream..