• No results found

Fabrication and Characterization of Kevlar Fiber Reinforced Polypropylene Based Composite for Civil Applications

N/A
N/A
Protected

Academic year: 2020

Share "Fabrication and Characterization of Kevlar Fiber Reinforced Polypropylene Based Composite for Civil Applications"

Copied!
6
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 1. Change of tensile strength with Kevlar percentage in composite.
Figure 5. Change of young’s modulus with temperature.
Figure 8. Fracture surface of composites at different magnification (a, c~ at 200 micrometer; b~at 500 micrometer and d~at 1000 micrometer)

References

Related documents

Berdasarkan latar belakang dan rumusan masalah maka tujuan dari penelitian ini adalah untuk mendeskripsikan efektivitas model pembelajaran discovery learning pada materi koloid

STEMI: ST-elevation myocardial infarction; IRI: ischemia-reperfusion injury; PCI: percutaneous coronary intervention; IC: ischemic conditioning; RIC: remote ischemic conditioning;

Route stability is identified by computing Link Expiration Time (LET) and is used in finding path [9], [10]. Single metric is not enough to identify the best route since

presentatieversie met reflectie aangepast doc 1 Universiteit Twente Bacheloropdracht De veranderingen door de RFID technologie bij Selexyz Hans van Veen (S0093734) Universiteit

Production of one free radical can lead to further formation of radicals via sequential chain reactions.[3] Under physiological conditions, ROS are produced in

A Survey on Knowledge, Attitude and Practice of Pharmacovigilance towards Adverse drug reactions reporting among Doctors and Nurses in a Tertiary Care Hospital in

For re-staging, the patient underwent chest MDCT using the same protocol as the other cases, and PLSVC was discovered at the left side of the mediastinum and the lateral

Being motivated from these researches on VANET, in this dissertation two reactive routing protocol AODV and DSR are examined to satisfy various properties, like: average