• No results found

Combining fault location estimates for a multi tapped distribution line

N/A
N/A
Protected

Academic year: 2020

Share "Combining fault location estimates for a multi tapped distribution line"

Copied!
6
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Fig. 1  Single phase circuit with a phase to ground fault
Fig. 5  System at non-fundamental frequency during fault on Tapped line using double-ends measurement
Fig. 8  SLG fault 30m away on different location (a) On Tapped line 1 (b) On Tapped line 2 and (c) On the main line
Fig. 9  DL fault 30m away from POM1 (a) On Tapped line 1 (b) On Tapped line 2 and (c) On the main line
+2

References

Related documents

The response rate to the inclusion of SBI was calculated in three separate groups: dividing patients based on their LBT results (positive or negative), dividing patients by their

As shown in Table 1 , the biggest churches are the Assembly of God (12.3 million), the Christian Congregation in.. Religions in Brazil according to the 2010 census. The

[r]

This study developed a mathematical programming model, which is a hybrid from the set covering model of discrete location approaches and the center of gravity method of

The Local Authority will ensure that its officers and employees are trained for disaster management; resources relating to disaster management are so maintained

to the genetic distance of the locus from the centromere (i.e., linked genetic markers. pombe, most disomic aneu- recombination, thick lines), or NDJ events of the opposite ploids

AMI requires smart meters to be installed on consumer premises for usage monitoring.Smart grids are now being deployed in many countries due to many advantages like

Recently a new validated HPLC method [11] was developed for determination of pregabalin in bulk drug and capsule dosage forms.Allof these methods are very expensive because these