• No results found

Experimental Investigation of Friction Stir Welding and TIG Welding for Al-6082

N/A
N/A
Protected

Academic year: 2020

Share "Experimental Investigation of Friction Stir Welding and TIG Welding for Al-6082"

Copied!
7
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Table 1. Chemical Composition Of Aa6082
Fig 1. The process of friction stir welding
Table 3: a,b,c,d represents the hardness test reports on tungsten inert gas welding and friction stir welding
Fig 3 the microstructure of friction stir welding on the heat affected zone of the aluminium 6082
+2

References

Related documents

The purpose of this study was to investigate the relationships among goal orientation, self-handicapping, enjoyment, and anxiety in high school varsity girls’ basketball

In the present study, we tested a panel of bacterial strains including both reference ATCC strains and MDR phenotypes expressing active efflux pumps [4, 5, 22].. In fact,

The synthesis process for an oriented texture requires a 3D reference volume and a flow field defined in the 3D region in the surface mesh.. As already discussed, the 3D

When a pediatric patient is admitted to our hos- pital, a preprinted cardiopulmonary resuscitation dosage guide sheet is selected by the pediatric ad- mitting nurse based on the

ЗМІСТ

La placa de unión de la diagonal de cordón superior AB514 y la diagonal de cordón AB522 están conectadas con pernos cortos de arriostramiento AB549A en la parte de debajo de

welding (TIG welding) : Gas shielded arc welding using a non-consumable, pure or activated tungsten electrode in which the arc and the weld zone are protected by a shroud of inert

“Ellen White and the Development of Seventh-day Adventist Doctrines.” Pages 107–17 in Understanding Ellen White: The Life and Work of the Most Influential Voice in.