• No results found

Development of an Automated Design-to-Analysis Process for a Nuclear Power Plant

N/A
N/A
Protected

Academic year: 2020

Share "Development of an Automated Design-to-Analysis Process for a Nuclear Power Plant"

Copied!
10
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 1. Schematic of the four steps in design-to-analysis process
Figure 2. An example of local details in 3D design solid models adjacent to the pressurizer base
Figure 4. A 3D design solid model of the pressurizer with simplified geometry
Figure 60 A FEA mesh of the pressurizer base
+2

References

Related documents

Since Aaker (1997) has defined brand personality as a, “set of human characteristics associated with the brand”, therefore Islamic brand personality can be described as a, “set

NYISO Capacity Market Products | EEE Starting with the 2021/2022 Capability Year, Energy Storage Resources that are Installed Capacity Suppliers with Energy Duration Limitations

After the selection committee examines the application papers, the Chairperson of the Foundation will finalize the selection upon the consent of the board of trustees, on condition

Compared to detailed window models standard triple and quadruple glazing models resulted in lower heating and higher cooling needs, whereas in case of quintuple windows the

14 When black, Latina, and white women like Sandy and June organized wedding ceremonies, they “imagine[d] a world ordered by love, by a radical embrace of difference.”

In BPEL4SWS variables can be defined as either WSDL message types, xsd elements, simple types or complex types like described in the WS-BPEL 2.0 specification, section 8.1..

The ultimate tensile strength of a hardened layer on a material surface has been calculated experimentally and analytically with the application of the finite element method

At the person level, we tested the effects of educational attainment, language, gender, age, and cognitive skill on individual test-taking disengagement in literacy, numeracy,