• No results found

Development of a laser pointer mouse

N/A
N/A
Protected

Academic year: 2019

Share "Development of a laser pointer mouse"

Copied!
282
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 3.1: Laser pointer mouse overall system design showing the various subsystems
Figure 3.2: Laser detection subsystem with its three layers
Figure 3.3: The effects of Keystone (Wikipedia 2010d)
Figure 3.4: Possible circle detection approach (Wikipedia 2010d)
+7

References

Related documents

Help in finding the right affordable college will be readily available at the Minnesota State Colleges and Universities State Fair booth in the Education Building on Cosgrove

Buy Genius Ring Pointer Laser Wireless Mouse Controller USB Receiver Presenter Online in Oman.. If the switch button is released the selected document

Now, take one of the supplied adhesive collimation targets and affix it to the center of the mirror’s surface through the hole of the paper template (Figure 19f). The center of

Mark the three cross points of the three vertical lines and the three horizontal lines as A,B,C, which are the reference points for the left, face and right

When an alarm limit is reached, the audible alarm will sound and the display icon HIGH or LOW will appear on the LCD.. Note that if the bottom switch (located in the

The laser pointer beam provides accurate long distance measurements for photo tachometer measurements and also identifies the measurement spot for the non-contact temperature

For example, if the meter is 12 inches from the target (spot), the diameter of the target must be at least 2 inches.. Other distances are shown below in the field of

1. While pulling the Trigger, push the backlight/laser button once to turn on the backlight. Press it again to turn on the laser pointer. When the laser is ON the laser icon