• No results found

Temperature-stable dielectric properties from -20°C to 430°C in the system BaTiO3-Bi(Mg0.5Zr0.5)O3

N/A
N/A
Protected

Academic year: 2019

Share "Temperature-stable dielectric properties from -20°C to 430°C in the system BaTiO3-Bi(Mg0.5Zr0.5)O3"

Copied!
26
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Table 1. Sintering temperatures, density and average grain size of 1-xBaTiO3-xBi(MgZr)O ceramics
Table 2. Summary of dielectric properties of BaTiO3-xBi(Mg0.5Zr0.5)O3 solid solutions
Table 3. Vögel-Fulcher fitting parameters at 1 kHz, for x=0.05, 0.1, 0.3 and 0.4, in
Figure 1. XRD patterns at room temperature for compositions x=0-0.5.
+7

References

Related documents

Effectiveness Whether the results of research conducted by turtle researchers in the three districts of East Java province have shown sufficient results and can

The FA-SVM classification is a process of classification of Indonesian opinion movie data using the SVM model, but before the classification process is carried

WORLD JOURNAL OF SURGICAL ONCOLOGY Zhang et al World Journal of Surgical Oncology 2013, 11 84 http //www wjso com/content/11/1/84 RESEARCH Open Access Preventive effect of ulinastatin

A mobile network is a dynamic reconfigurable network with heavy traffic over the network. As the network is available widely, there are more chances of

In general, the hybrid and solar- powered electric vehicles provide better fuel economy and the vehicle performance is not provided by the IC engine alone, but

The elements such as Timeliness, Information Quality, condition of product and quality of the contact person is slightly different from the work of Mentzer (2001)

The findings of this study are significant as the existing cooperative societies will use them as a reference text since the study aimed at exposing the factors that influence

The data of Table 2 show the difference between the effectiveness of teaching skills and knowledge competencies and the social background of the pupils who attend schools in the