• No results found

Measuring tappet rotation in a valvetrain rig when lubricated in a fully formulated oil containing MoDTC-type friction modifier

N/A
N/A
Protected

Academic year: 2019

Share "Measuring tappet rotation in a valvetrain rig when lubricated in a fully formulated oil containing MoDTC-type friction modifier"

Copied!
16
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Fig. 1. The motored single cam rig: (a) photograph of the rig (b) 2D-schematic diagram of direct actingmechanical type of valvetrain [24]
Fig. 2. Tappet rotation test rig
Fig. 3. Sensor and magnet information: (a) sensor position on the single cam rig, (b) different sizes of magnetswere initially tested, (c) a magnet force fitted onto the underside of a shim (d) magnet dimensions and position
Fig. 4. Single cam rig test cycle
+4

References

Related documents

Instructor, Principles of Oncology Part I & II, Target and Biotherapies in Oncology, Colorectal Cancer, Lung Cancer Recitation Leader: Principles of Oncology Part I & II,

1.23 Where undertakings buy longevity bonds which do not meet the requirements for risk-mitigation techniques set out in Articles 208 to 215 of Commission Delegated

But if the term “applicable destination rate” is clarified or interpreted to mean the same rate imposed on a local sale, then the compensating tax rate would have to be raised to

Acute, 96 hour toxicity tests with adult grass shrimp (Palaemonetes pugio) assessed the effects of CECs (Polybrominated Diphenyl Esther (PBDE) – 47, ibuprofen, bifenthrin,

Long-term clinical outcomes of sirolimus- versus paclitaxel-eluting stents for patients with unprotected left main coronary artery disease: analysis of the MAIN-

The concurrent effects of a fast national growth rate, of a large and dense residential area and a pressing demand for urban environmental protection create

An alternative set of rules should probably also direct community councils that they should not take on more CDEP workers than they can keep busy with work activities and that,

Furthermore, we assume that the publication of software comprehension data (e.g. source code infor- mation) as Linked Data can open new analysis possibilities by en- abling