Method of ultrasonic measurement of texture
Full text
Figure
Related documents
Ultrasonic flowmeters work by measuring the travel time of the ultrasonic wave, and computing flow velocity based on that measurement.. There are two types of ultrasonic
Residual Stress Measurements in Steel Plates and Welds Using Critically Refracted (L CR ) Waves. Determination of near surface residual stresses on welded joints using
It is therefore a principal object of the present inven- tion to provide a field instrument means and method for ultrasonic measurement of texture, stress and related material
ULTRASONIC METHODS OF TEXTURE MONITORING FOR CHARACTERIZATION OF FORMABILITY OF ROLLED ALUMINUM
Distribution of velocity and Reynolds stress was measured using ultrasonic velocimetry in flows of water and Newtonian water-ballotini slurries in a pressurized Plexiglas
[5] have investigated the propagation velocity of longitudinal and transverse ultrasonic waves in Epoxidized Natural Rubber-Ethylene Propylene Diene Monomer with weight percentage
This investigation was conducted to assess the feasibility of using ultrasonic testing (in this case ultrasonic velocity measurements) to determine compaction
Ultrasonic wave velocity results obtained from parent plate are used as no stress state velocity values for residual stress calculations.. Ultrasonic immersion technique is used