• No results found

Performance of finned tube heat exchanger – Review

N/A
N/A
Protected

Academic year: 2020

Share "Performance of finned tube heat exchanger – Review"

Copied!
7
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 1. (a) Straight fin of uniform cross section. (b) Straight fin of Non uniform cross section
Figure 2.Concentric tube heat exchangers. (a) Parallel flow. (b) Counter flow. Alternatively, the fluids may move in cross flow (perpendicular to each other), as shown by the finned and unfinned tubular heat
Figure 6. Compact heat exchanger cores. (a) Fin–tube (flat tubes, continuous plate fins)
Figure 7.Schematic Diagram for the Experimental Setup
+3

References

Related documents

C3 via fly back–forward diode Df1. The voltage stress on power switch S2 is clamped by clamp capacitor Cc1 which equals the output voltage of the boost converter. The input

To design the pulsed power amplifier, we proposed the novel switching circuit with the fast fall time and the high switching voltage for a pulsed power amplifier5. The proposed

In this report, we describe a patient with a DKC1 mis- sense variant, c.361A>G (p.Ser121Gly), who developed multiple rectal cancers in young adulthood after bone marrow

This study thus aims to investigate the effects of home NIV on stable COPD patients with chronic hypercapnic respiratory failure by using NIV ventilator equipped with

Der bedeutendste alleinige Risikofaktor für zerebrovaskuläre Erkrankungen ist die arterielle Hypertonie. Diese ist vor allem in den Industrienationen weit verbreitet. Hierzulande sind

Efficacy and tolerability of indacaterol 75 µ g once daily in patients aged $ 40 years with chronic obstructive pulmonary disease: results from 2 double-blind,

In order to measure the FFAD of neutron-induced reactions, a fission detection setup based on parallel-plate avalanche counters (PPACs) has been developed and successfully used at

Changing of forest to cultivated area also did not showed consistent effects on the alteration of bacterial community composition as determined by PLFA (Waldrop et al.