Modelling and Vibration Analysis of Car Spoiler at Different Speeds

To design a new cross section type for car side door impact beam, the properties of material which is choose in material selection stage is considered. And sometime, the shape

Static stress analysis is important to point out critical (highest stress) regions in the frame. These critical regions may cause fatigue failures. In this study, ladder

In order to improve the aerodynamics Formula SAE car, split type rear wings are used to which produce a lesser drag and more downforce comparatively with respect to single

The design of the selected car jack (Figure 1) can be replaced with beam elements connect- ed in joints (Figure 3). Joints A and B are used for fix connection with the ground.

1) In this project the existing fuel tank of Maruti alto Car is taken and designs it in solid works software used for designing of CAD models. The design of

The present paper objective is to design the wind friction reduction attachments to the rear portion of a car which can be opened and closed depending on the requirement,

The spiral wind blade with an Archimedes shape shows relatively high rotor efficiency compared to the aerodynamic performance of the other blades like the Savonius type rotor in

In order to compare the new pedal box design with previous pedal box design (UTP FSAE Second Car), ADAMs software has been used to conduct dynamics and kinematics