• No results found

Study the physical, mechanical, thermal and morphological properties of LDPE/SAGO starch blend

N/A
N/A
Protected

Academic year: 2020

Share "Study the physical, mechanical, thermal and morphological properties of LDPE/SAGO starch blend"

Copied!
8
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 1 Percentages of water absorption for LDPE/Starch blend with time of Immersion
Figure 2 Effect of sago starch content on LDPE a) Tensile strength b) Elongation at break c) Elastic modulus
Figure 4 Effect of sago starch content on impact strength of LDPE
Table 3: Effect of sago starch content on the onset of degradation temperature and percentage of weight loss for LDPE blend
+2

References

Related documents

The university takes the internationalization of engineering education so seriously that it has recently created an office of the director of international engineering initiatives

• Other exploration data, if meaningful and material, should be reported including (but not limited to): geological observations; geophysical survey results; geochemical

It also owns 94% of Goldplata Peru, which has the Suckuytambo/El Diablo (Cusco/Arequipa area), Condoroma (Puno area) projects in southern Peru, which show considerable silver, gold

When the targeted metabolite composition (metabolite concentrations normalized to the total concentration of targeted metabolites) of suspended water column particles is compared to

If you are a CFE and a current member of the Vancouver Chapter of the Association of Certified Fraud Examiners and you would like your name and contact information on our

assuming a 10 percent mineralization rate (3.0 cubic yards); and 3) dairy-based compost assuming a 30 percent mineralization rate (1.0 cubic yards).. Subplot treatments

The wave area in which the dynamic recrystallization occurred was at a higher collision angle further away from the center of the weld, and the grain refinement can be seen