SCHEDULE and PRICE LIST
Printers
KYOCERA Document Solutions America, Inc.
National Accounts
Contract Number:
GS-35F-0041L
Contract Option Period 2: October 1, 2000 - September 30, 2015
Up to and including Modification PO-0099
General Services Administration
General Purpose Commercial
InformationTechnology Equipment,
Software and Services Schedule 70
Special Item Numbers:
132-8
132-12
Print Date: April 2014
GSA Evergreen Award 2008
The following is an example of an Outright Purchase Order.
Please pay particular attention to the areas marked A-H.
Incorrect information in these areas will require modification from the issuing office.
A. Contract Number -
Must Have GSA Contract Number
B. Vendor Address -
KYOCERA Document Solutions America, Inc.
Attn: National Accounts
c/o Local Authorized Kyocera Dealer (Insert Name)
225 Sand Road, P.O. Box 40008
Fairfield, New Jersey 07004-0008
C. Products -
Descriptions of the items ordered by the government user
D. Quantity -
The quantity ordered of the unit
E. Price -
The price of one unit to be purchased
F. Total Price Per Item -
The total amount for that item based on the unit price (Quantity Ordered x Unit Price)
G. Total Price of Purchase Order -
The total dollar amount obligated for the purchase order
H. Signature -
Be sure to sign the purchase order. Must be signed by an authorized Contracting/Ordering Officer
1. GSA CONTRACT NO. 2.REQUISITION NO. 3. DATE OF ORDER 4. PURCHASE ORDER NUMBER 5. PRIORITY GS-35F-0041L DD/MM/YY FSA-XXXXX-XXXXX
6. ISSUED BY 7 ADMINISTERED BY 8. DELIVERY FOB AGENCY NAME AGENCY NAME ( X) DESTINATION ATTN, BUYERS NAME ADDRESS ( )OTHER ADDRESS CITY, STATE ZIP (See Schedule) CITY, STATE ZIP
9. CONTRACTOR Vendor Id: CAGE CODE 65678 10. DELIVERY TO FOB POINT BY NAME AND KYOCERA DOCUMENT SOLUTIONS AMERICA, INC. 12. DISCOUNT AND/OR
ADDRESS ATTN: NATIONAL ACCOUNTS NET PAYMENT TERMS C/O KYOCERA AUTHORIZED DEALER NAME
225 SAND ROAD, P.O. BOX 40008 13. MAIL INVOICES TO: FAIRFIELD, NJ 07004-008
14. CONSIGNEE AND DESTINATION (SHIP TO) 15. PAYMENT WILL BE MADE BY: MARK ALL PKGS AGENCY NAME AGENCY NAME AND PAPER WITH ADDRESS ADDRESS CONTRACT OR
ATN: ATTN: ORDER NUMBER
CITY, STATE ZIP CITY, STATE ZIP 16. ACCOUNTING AND APPROPRIATION DATA/LOCAL USE
See Schedule
17. ITEM NO. 18. ARTICLES OR SERVICES 19. QTY. 20. UNIT 21. UNIT PRICE 22. EXTENDED AMOUNT 0001 KYOCERA FS-C5400DN 01 Each $ x,xxx.xx $ x,xxx.xx
37 PPM Laser Printer
If quantity accepted by the Government is same 24. ORDERED BY 25. TOTAL
as quantity ordered, indicated by x. If different, enter Signature____________________________________
actual quantity acceptedd below quantity ordered and Name_______________________________________ $ xxxxx.xx encircle Title:________________________________________
26. QUANTITY IN COLUMN 20 HAS BEEN 27. PAYMENT 28. INITIALS
( ) INSPECTED ( ) RECEIVED ( ) ACCEPTED AND CONFORMS TO THE ( )COMPLETE CONTRACT EXCEPT AS NOTED ( ) PARTIAL
( ) FINAL 29. AMT VERIFIED FOR CHECK NUMBER
DATE SIGNATURE OF AUTHORIZED GOVERNMENT REP
30. I certify this account is correct and proper for payment 31. PAID BY 32. BILL OF LADING NO.
DATE SIGNATURE OF AUTHORIZED GOVERNMENT REP
33. REC’D AT 34. REC’D BY 35. DATE REC’D
G
Sample Purchase Order – Outright Purchase
S
S
A
A
M
M
P
P
L
L
E
E
(date) Net 30 DaysH
F
E
D
C
B
A
11. MARK IF BUSINESS IS ( ) SMALL ( ) SMALL DIS-ADVANTAGED ( ) WOMEN OWNED ( ) OTHERKyocera is not responsible for typographical errors or omissions in this catalog. Designs and specifications subject to change without notice.
Photos are for illustration only, and may contain optional accessories not included in specific product configurations.
G.S.A. Contract Number GS-35F-0041L
Contract Option Period 2: October 1, 2000 Through September 30, 2015
General Contract Information
Ordering Address
Payment Address
KYOCERA Document Solutions America, Inc.
KYOCERA Document Solutions America, Inc.
Attn.: National Account Division
As shown on invoice
c/o Local Authorized Dealer (insert name)
225 Sand Road, PO Box 40008
Fairfield, NJ 07004-0008
Telephone: (973) 808-8444
e-mail: NAT.Orders@da.kyocera.com • Fax: (973) 882-4411
Payment Terms
- Net 30 days. All prices shown herein are net (discount deducted).
Delivery
Deliveries will be made, at the delivery destination, within thirty (30) days of receipt of a written order at the “Ordering Address” as noted above.
All equipment and supplies are shipped F.O.B. destination.
Federal I.D. No.
DUNS#
Business Size
TIN: 95-2819506
06-446-5503
Large
Limited Warranty -
See specific models for full details regarding warranties.
A. Unless specified otherwise in the contract, the Kyocera standard commercial warranty as stated in our commercial price list will apply to this contract.
B. Kyocera warrants and implies that the items delivered hereunder are merchantable and fit for use for the particular purpose described in this contract.
C. Limitation of Liability. Except as otherwise provided by an express or implied warranty, Kyocera will not be liable to the Government for consequential
damages resulting from any defect or deficiencies in accepted items.
D. Inspection and repair of defective equipment under this warranty will be performed only at the Government’s site.
Accessories
Accessories may not be purchased separately on Kyocera’s GSA contract. Kyocera sells accessories only in conjunction with the base units in a
bundled configuration. If a federal customer needs to order Kyocera accessories only, a separate open market purchase order must be issued.
Any orders for accessories only referencing the GSA contract will be returned.
Maintenance
For Maintenance beyond a 50-mile radius, please contact your Kyocera National/Government Account Manager.
Minimum Order Limit
- The minimum acceptable order for shipment to one location is $100.00.
Geographic Coverage (Delivery Area)
The contract delivery area is defined as the forty-eight (48) contiguous states, District of Columbia, Alaska, and Hawaii.
Government Commercial Credit Card
- Accepted.
Authorized Dealers
- For a complete list of authorized dealers in your area, please call (973) 808-8444.
For the most up to date listing of the servicing organization for your location visit the Kyocera web site at
http://www.usa.kyoceradocumentsolutions.com, then select United States, and go to “Where to Buy”
Prime Contractors
When an entity wishes to purchase goods or services from the federal government under a subcontractor's GSA contract or another agency's BPA,
then the prime contractor must issue, and the subcontractor must acknowledge compliance with the prime contract utilizing OMB No. 9000-0014
Form 1413. This is a requirement of the FAR under Subpart 53 (53.222.e).
Form SF1413 is available on the web at http://www.gsa.gov <http://www.gsa.gov/> , then select Forms and All Current Forms.
This contractor and subcontractor shall abide by the requirements of 41 CFR 60-300.5(a) and 41 CFR 60-741.5(a). These regulations
prohib-it discrimination against qualified individuals on the basis of disabilprohib-ity and protected veterans, and require affirmative action by covered
prime contractors and subcontractors to employ and advance in employment qualified individuals with disabilities and protected veterans.
INFORMATION FOR ORDERING OFFICES 1. Geographic Scope of Contract:
The minimum acceptable geographic scope of this contract is worldwide.
2. Contractors Ordering Address and Payment Information:
a. Ordering and Payment Address
KYOCERA Document Solutions America, Inc. c/o local dealer or reseller
225 Sand Road PO Box 40008 Fairfield, NJ 07004-0008
b. Kyocera will accept the Government purchase card for payments equal to or less than the micro-purchase threshold for oral or written delivery orders. Government micro-purchase cards will be acceptable for payment above the micro-purchase threshold. In addition, bank account information for wire transfer payments will be shown on the invoice
c. The following telephone number(s) can be used by ordering agencies to obtain technical and/or ordering assistance.
Ordering Assistance: 973-808-8444 (Home Office) 703-469-2350 (Washington, DC Branch) Technical Assistance: 800-255-6482
3. Liability For Injury Or Damage
Kyocera shall not be liable for any injury to Government personnel or damage to Government property arising from the use of equipment maintained by Kyocera, unless such injury or damage is due to the fault or negligence of Kyocera.
4. Statistical Data for Government Ordering Office Completion of Standard Form 279:
Block 9: G. Order/Modification Under Federal Schedule Block 16: Data Universal Numbering System (DUNS): #06-446-5503 Block 30: Type of Contractor – C, Large Business
Block 31: Woman-Owned Small Business – No
Block 36: Kyocera Taxpayer Identification Number (TIN) – 95-2819506 a. CAGE Code: 65678
b. Kyocera has registered with the Central Contractor Registration Database.
5. FOB Point: Destination. 6. Delivery Schedule: 30 days ARO 7. Discounts: 0% net 30 days
8. Trade Agreements Act of 1979, as amended:
Kyocera Document Solutions America, Inc. Printer Models are produced in Japan. The purchase of these models are exempt from the Buy American Act pursuant to the Trade Agreements Act of 1979.
9. Statement Concerning Availability of Export Packing:
Export packing is available upon request. These items will be handled on an Open Market basis depending on requirements. Contact Kyocera for quotations.
10. Small Requirements: The minimum dollar value of orders to be issued is $100.00. 11. Maximum Order: (All dollar amounts are exclusive of any discount for prompt payment.)
Special Item Number 132-8 – Purchase of Equipment. The maximum dollar value per order for all purchased equipment will be $500,000.
Special Item Number 132-12 – Repair Parts/Spare Parts. The maximum dollar value per order for all repair parts/spare parts will be $10,000
Note: Maximum Order does not apply to Special Item Numbers 132-12 Maintenance and Repair Service (except for Repair Parts/Spare Parts) or 132-34 Maintenance of Software.
12. CONTRACTOR COMMITMENTS, WARRANTIES AND REPRESENTATIONS
a. For the purpose of this contract, commitments, warranties and representations include, in addition to those agreed to for the entire schedule contract:
(1) Time of delivery/installation quotations for individual orders;
(2) Technical representations and/or warranties of products concerning performance, total system performance and/or configuration, physical, design and/or functional characteristics and capabilities of a product/equipment/ service/software package submitted in response to requirements which result in orders under this schedule contract.
(3) Any representations and/or warranties concerning the products made in any literature, description, drawings and/or specifications furnished by the Contractor.
The above is not intended to encompass items not currently covered by the GSA Schedule contract.
13. SECTION 508 COMPLIANCE
For complete details on Kyocera's product 508 Compliance go to
www.usa.kyoceradocumentsolutions.com. CLICK on United States; then go to National/Government Accounts. TERMS AND CONDITIONS APPLICABLE TO PURCHASE OF GENERAL PURPOSE COMMERCIAL INFORMATION TECHNOLOGY EQUIPMENT (SPECIAL ITEM 132-8)
1. MATERIALS AND WORKMANSHIP
All equipment furnished hereunder must be new and satisfactorily perform the function for which it is intended.
2. ORDER
A written order, EDI (GSA Advantage! and FACNET), and credit card orders shall be the basis for purchase in accordance with the provisions of this contract. If time of delivery extends beyond the expiration date of the contract, Kyocera will be obligated to meet the delivery and installation data specified in the original order.
Written orders, EDI orders, credit card orders or, in the case of BPA’s or BOA’s, telephone orders are permissible and must be backed up with a facsimile copy of the order.
3. TRANSPORTATION OF EQUIPMENT
FOB DESTINATION. -All prices shown in the Price List are based on F.O.B. destination to the 48 contiguous states and the District of Columbia.
Prices are F.O.B. destination to the port of embarkation within the 48 contiguous states and Washington DC when the ultimate destination is within Zone 2 (Alaska and Hawaii). For Shipment to Alaska and/or Hawaii, the Government can select one (1) of the two (2) following options, which must be clearly indi-cated on the purchase order:
a) The item will be shipped to the port of embarkation within the 48 contiguous states and Washington, DC as indicated on the purchase order. The Government will then be responsible for shipping the product from the designated port of embarkation to the using agency.
b) The item will be shipped to the using agency directly by Kyocera. Kyocera will prepay the freight and bill the using agency the exact shipping cost. The Government purchase order will indicate that freight is to be prepaid by Kyocera and billed to the Government.
4. INSTALLATION AND TECHNICAL SERVICES
a. INSTALLATION. Kyocera will install the equipment and train Government personnel in the use of such equipment. Maintenance of Equipment shall be available to the Government; such services are listed in the price schedule section.
b. On-site network installation assistance can be obtained on an open market basis through a separate contract from the local dealer.
c. OPERATING AND MAINTENANCE MANUALS. Kyocera shall furnish the Government with one (1) copy of all operating and maintenance manuals relating to the equipment being purchased.
5. INSPECTION/ACCEPTANCE
Kyocera shall only tender for acceptance those items that conform to the requirements of this con-tract. The Government reserves the right to inspect or test any equipment that has been tendered for acceptance. The Government may require repair or replacement of nonconforming equipment at no increase in contract price. The Government must exercise its post acceptance rights (1) within a rea-sonable time after the defect was discovered or should have been discovered; and (2) before any sub-stantial change occurs in the condition of the item, unless the change is due to the defect in the item.
6. WARRANTY - See specific models for full details regarding warranties.
a. Unless specified otherwise in this contract, the Kyocera standard commercial warranty as stated in our commercial pricelist will apply to this contract.
b. The Kyocera warrants and implies that the items delivered hereunder are merchantable and fit for use for the particular purpose described in this contract.
c. Limitation of Liability. Except as otherwise provided by an express or implied warranty, Kyocera will not be liable to the Government for consequential damages resulting from any defect or deficiencies in accepted items.
d. Inspection and repair of defective equipment under this warranty will be performed only at the Government’s site.
7. PURCHASE PRICE FOR ORDERED EQUIPMENT
The purchase price that the Government will be charged will be the Government purchase price in effect at the time of order placement, or the Government purchase price in effect on the installation date (or delivery date when installation is not applicable), whichever is less.
8. RESPONSIBILITIES OF THE CONTRACTOR
Kyocera shall comply with all laws, ordinances, and regulations (Federal, State, City or otherwise) covering work of this character, and shall include all costs, if any, of such compliance in the prices quoted in this offer.
9. TRADE-IN OF INFORMATION TECHNOLOGY EQUIPMENT
When an agency determines that Information Technology equipment will be replaced, the agency shall follow the contracting policies and procedures in the Federal Acquisition Regulation (FAR), the policies and procedures regarding disposition of information technology excess personal property in the Federal Property Management Regulations (FPMR) (41 CFR 101-43.6), and the policies and proce-dures on exchange/sale contained in the FPMR (41 CFR part 101-46).
TERMS AND CONDITIONS APPLICABLE TO MAINTENANCE, REPAIR SERVICE AND REPAIR PARTS/SPARE PARTS FOR GOVERNMENT-OWNED GENERAL PURPOSE COMMERCIAL INFORMATION TECHNOLOGY EQUIPMENT (AFTER EXPIRATION OF GUARANTEE/WARRANTY PROVISIONS AND/OR WHEN REQUIRED SERVICE IS NOT COVERED BY GUARANTEE/WARRANTY PROVISIONS) AND FOR LEASED EQUIPMENT (SPECIAL ITEM NUMBER 132-12)
General Information
Contract Number: GS-35F-0041L
1. SERVICE AREAS
a. The maintenance and repair service rates listed herein are applicable to any Government location within a 49 mile radius of the Contractor's Authorized Dealers service points. If any additional charge is to apply because of the greater distance from the Contractor's service locations, the mileage rate or other distance factor shall be stated in paragraphs 7.d and 8.d of this Special Item Number 132-12.
b. When repair services cannot be performed at the Government installation site, the repair services will be performed at one of Kyocera plant(s) listed below:
Home Office Washington, DC Branch
KYOCERA Document Solutions America, Inc. KYOCERA Document Solutions America, Inc. 225 Sand Road 4350 N. Fairfax Drive, Ste. 850
PO Box 40008 Arlington, VA 22203 Fairfield, NJ 07004-0008 Phone: (703) 469-2350 Phone: (973) 808-8444 Fax Line: (703) 469-2314 Fax Line: (973) 882-4411
2. MAINTENANCE ORDER
a. Agencies may use written orders, EDI orders, credit card orders, or BPAs, for ordering maintenance under this contract. Kyocera shall confirm orders within fifteen (15) calendar days from the date of receipt, except that confirmation of orders shall be considered automatic for renewals for mainte-nance (Special Item Number 132-12). Automatic acceptance of order renewals for maintemainte-nance service shall apply for machines, which may have been discontinued from use for temporary periods of time not longer than 120 calendar days. If the order is not confirmed by Kyocera as prescribed by this paragraph, the order shall be considered to be confirmed by the Contractor. b. Kyocera shall honor orders for maintenance for the duration of the contractperiod or a lessor period
of time, for the equipment shown in the pricelist. Maintenance service shall commence on a mutually agreed upon date, which will be written into the maintenance order. Maintenance orders shall not be made effective before the expiration of any applicable maintenance and parts guarantee/ warranty period associated with the purchase of equipment. Orders for maintenance service shall not extend beyond the end of the contract period.
c. Maintenance may be discontinued by the Government on thirty (30) calendar days written notice, or shorter notice when agreed to by Kyocera; such notice to become effective thirty (30) calendar days from the date on the notification. However, the Government may extend the original discon-tinuance date upon written notice to Kyocera, provided that such notice is furnished at least ten (10) calendar days prior to the original discontinuance date.
d. Annual Funding. When annually appropriated funds are cited on a maintenance order, the period of maintenance shall automatically expire on September 30th of the contract period, or at the end of the contract period, whichever occurs first. Renewal of a maintenance order citing the new appropriation shall be required, if maintenance is to continue during any remainder of the contract period.
e. Cross-year Funding Within Contract Period. Where an ordering office's specific appropriation authority provides for funds in excess of a 12 month, fiscal year period, the ordering office may place an order under this schedule contract for a period up to the expiration of the contract period, notwithstanding the intervening fiscal years.
f. Ordering offices should notify Kyocera in writing thirty (30) calendar days prior to the expiration of maintenance service, if maintenance is to be terminated at that time. Orders for continued maintenance will be required if maintenance is to be continued during the subsequent period.
3. REPAIR SERVICE AND REPAIR PARTS/SPARE PARTS ORDERS
a. Agencies may use written orders, EDI orders, credit card orders, blanket purchase agreements (BPAs), or small order procedures for ordering repair service and/or repair parts/spare parts under this contract. Orders for repair service shall not extend beyond the end of the contract period. b. When repair service is ordered, only one chargeable repairman shall be dispatched to perform
repair service, unless the ordering office agrees, in advance, that additional repair personnel are required to effect repairs.
4. LOSS OR DAMAGE
When Kyocera removes equipment to his establishment for repairs, Kyocera shall be responsible for any damage or loss, from the time the equipment is removed from the Government installation, until the equipment is returned to such installation.
5. SCOPE
a. Kyocera shall provide maintenance for all equipment listed herein, as requested by the Government agency during the contract term. Repair service and repair parts/spare parts shall apply exclusively to the equipment types/models within the scope of this Information Technology Schedule. b. Equipment placed under maintenance service shall be in good operating condition.
(1) In order to determine that the equipment is in good operating condition, the equipment shall be subject to inspection by Kyocera, without charge to the Government.
(2) Costs of any repairs performed for the purpose of placing the equipment in good operating condition shall be borne by Kyocera, if the equipment was under Kyocera Document Solutions, Inc. guarantee/warranty or maintenance responsibility prior to the effective date of the mainte-nance order.
(3) If the equipment was not under Kyocera responsibility, the costs necessary to place the equip-ment in proper operating condition are to be borne by the Governequip-ment, in accordance with the provisions of Special Item Number 132-12 (or outside the scope of this contract).
6. RESPONSIBILITIES OF THE GOVERNMENT
a. Government personnel shall not perform maintenance or attempt repairs to equipment while such equipment is under the purview of a maintenance order, unless agreed to by Kyocera. b. Subject to security regulations, the Government shall permit access to the equipment, which is to
be maintained or repaired.
7. RESPONSIBILITIES OF THE CONTRACTOR
For equipment not covered by a maintenance contract or warranty, Kyocera repair service personnel shall complete repairs as soon as possible after notification by the Government that service is required. Within the service areas, this repair service should normally be done within 4 hours after notification.
8. MAINTENANCE RATE PROVISIONS
a. Regular Hours
Kyocera shall bear all costs of maintenance including labor, parts, and such other expenses as are necessary to keep equipment in good operating condition, provided that the required repairs are not occasioned by fault or negligence of the Government.
The basic maintenance rates for each make and model of machine shall entitle the Government to remedial maintenance service during the period 8:00 a.m. to 5:00 p.m., Monday through Friday, exclusive of holidays observed at the Government location.
After Hours Service For Which Customer Had Contractual Service
1) "After Hours" is defined as time beyond the daily equipment contract coverage. After Hours Service is available in most areas as determined by Kyocera local business practices 2) After Hours emergency unscheduled maintenance service or equipment covered by Full Service
Maintenance will be invoiced at the then current Time and Materials labor rates, which may be increased or decreased without notice.
3) Parts are not billable on any after hours emergency or preventive maintenance calls for those customers who have contractual service. Preventive Maintenance performed after hours at the Customer’s request will be billed at the then current Time and Materials rates, which may be increased or decreased without notice. Preventive Maintenance performed during the weekend for customers with contracted Weekend service Coverage is also available at the then current Time and Materials rates.
b. Travel and Transportation
1) If any charge is to apply over and above the regular maintenance rates because of distance between the Government location and Kyocera service area, the basis of such a charge will be $125 per hour travel time and the first 30 minutes of labor.
2) Such additional charge, if any, will apply to each remedial maintenance request, and it will be limited to one round trip for each service call.
c. Quantity Discounts
Quantity discounts from listed maintenance service rates for multiple equipment owned and/or leased by a Government agency are indicated below:
Quantity Range Discounts
0 Units 0%
9. REPAIR SERVICE RATE PROVISIONS
a. Charges. Charges for repair service will include the labor charge, computed at the rates set forth below, for the time during which repairmen are actually engaged in work, and, when applicable, the charge for travel or transportation.
b. Multiple Machines. When repairs are ordered by a Government agency on two or more machines located in one or more buildings within walking distance of each other, the charges will be computed from the time the repairman commences work on the first machine, until the work is completed on the last machine. The time required to go from one machine to another, or from one building to another, will be considered actual work performance, and chargeable to the Government, provided the time consumed in going between machines (or buildings) is reasonable. c. TRAVEL OR TRANSPORTATION
1) At The Contractor's Shop
i. When equipment is returned to Kyocera shop for adjustments or repairs which are not covered by the guarantee/warranty provision, the cost of transportation, packing, etc., from the Government location to Kyocera plant, and return to the Government location, shall be borne by the Government.
ii. The Government should not return defective equipment to Kyocera for adjustments and repairs or replacement without his prior consultation and instruction.
MAINTENANCE
PRICING SIN 132-12
Up to 49 miles
MODEL
DESCRIPTION
1+ UNITS
MONTHLY MAINTENANCE
†FS-2100DN
42 P.P.M. Laser Printer
$ 825.00
$ 107.00
ACCESSORIES
*
PF-320
500 Sheet Paper Feeder
176.00
41.00
PF-315+
2,000 Sheet Paper Feeder
(requires the PB-325 base unit)
528.00
-PB-325
Base Unit for units with PF-315+
154.00
-IB-32
IEEE 1284 Compliant NIC
63.00
-IB-51
Wireless LAN NIC
332.00
21.00
IB-50
Gigabit Ether Net Board
246.00
21.00
HD-6
SSD Memory Storage Device
237.00
21.00
UG-33
Upgrade Kit for Thin Print Support
99.00
-SD-144-512A
512 MB Memory
353.00
-SD-144-1A**
1 GB Printer DIMM Memory Upgrade
195.00
-PCL Barcode
CF Card PCL Barcode Flash Module 3.00
Flash Module
(Type A)
246.00
-Surge Protector
15 Amp Surge Protector
(protects from surges/provides noise filtering)
136.00
-†
Maintenance is for 1 year or 100,000 prints, whichever comes first.
When productivity and dependability are
essential in business, the FS-2100DN
produces documents at a speed of 42
pages per minute and boasts best in
the industry preventive maintenance
intervals of up to 300,000 pages.
Through Kyocera's advanced technology,
energy use has been reduced and most
replacement parts have been
eliminated or replaced with long
life components, reducing the
maintenance requirements
and down time of equipment.
SPECIFICATIONS AT A GLANCE
• Speed: 42 Pages Per Minute
• Function: Print
• Max Monthly Duty Cycle: 150,000 Pages Per Month
• Resolution: Fine 1200 mode (1200 x 1200dpi), Fast 1200 mode (600 x 600dpi multi bit),
600x600 dpi, 300x300 dpi
• Standard Paper Supply: 500 Sheet Drawer, 100 Sheet MPT
• Max Paper Size: 8.5" x 14"
• Max Paper Weight: 120 lb Index
• Duplexing: Standard
• Network Connectivity Standard: 10/100BaseTX/1000BaseT, Hi-Speed USB 2.0
• PDL PRESCRIBE, PCL6 (PCL5e/PCLXL, PCL5c), KPDL3, Line Printer, IBM Proprinter X24E
FS-2100DN LASER PRINTER
FS-2100DN
SIN 132-8
NOTE: The
Multi-Functional Printer
war-ranty
is for 90 days from the initial
date of installation. The warranty
includes Parts, Labor, and On-Site
Service. Supplies are excluded.
Full service maintenance provided
under this agreement shall include the
cost of maintenance, labor and
replacement parts, excluding supplies
and maintenance kits, necessary to
keep the equipment in good condition.
*Accessories cannot be purchased separately
on Schedule. Accessories are available only
on an open market basis. If a customer
needs to order accessories only, a separate
open market purchase order must be issued.
MAINTENANCE
PRICING SIN 132-12
Up to 49 miles
MODEL
DESCRIPTION
1+ UNITS
MONTHLY MAINTENANCE
†FS-4200DN
52 P.P.M. Laser Printer
$ 1,067.00
$ 263.00
ACCESSORIES
*
PF-320
500 Sheet Paper Feeder
176.00
41.00
PF-315+
2,000 Sheet Paper Feeder
(requires the PB-325 base unit)
528.00
-PB-325
Base Unit for units with PF-315+
154.00
-IB-32
IEEE 1284 Compliant NIC
63.00
-IB-51
Wireless LAN NIC
332.00
21.00
IB-50
Gigabit Ether Net Board
246.00
21.00
HD-6
SSD Memory Storage Device
237.00
21.00
UG-33
Upgrade Kit for Thin Print Support
99.00
-SD-144-512A
512 MB Memory
353.00
-SD-144-1A**
1 GB Printer DIMM Memory Upgrade
195.00
-PCL Barcode
CF Card PCL Barcode Flash Module 3.00
Flash Module
(Type A)
246.00
-Surge Protector
15 Amp Surge Protector
(protects from surges/provides noise filtering)
136.00
-†
Maintenance is for 1 year or 100,000 prints, whichever comes first.
When productivity and dependability are
essential in business, the FS-4200DN
produces documents at a speed of 52
pages per minute and boasts best in
the industry preventive maintenance
intervals of up to 300,000 pages.
Through Kyocera's advanced technology,
energy use has been reduced and most
replacement parts have been
eliminated or replaced with long
life components, reducing the
maintenance requirements
and down time of equipment.
SPECIFICATIONS AT A GLANCE
• Speed: 52 Pages Per Minute
• Function: Print
• Max Monthly Duty Cycle: 250,000 Pages Per Month
• Resolution: Fine 1200 mode (1200 x 1200dpi), Fast 1200 mode (600 x 600dpi multi bit),
600x600 dpi, 300x300 dpi
• Standard Paper Supply: 500 Sheet Drawer, 100 Sheet MPT
• Max Paper Size: 8.5" x 14"
• Max Paper Weight: 120 lb Index
• Duplexing: Standard
• Network Connectivity Standard: 10/100BaseTX/1000BaseT, Hi-Speed USB 2.0
PDL: PRESCRIBE, PCL6 (PCL5e/PCLXL, PCL5c), KPDL3, Line Printer, IBM Proprinter X24E
FS-4200DN LASER PRINTER
FS-4200DN
SIN 132-8
NOTE: The
Multi-Functional Printer
war-ranty
is for 90 days from the initial
date of installation. The warranty
includes Parts, Labor, and On-Site
Service. Supplies are excluded.
Full service maintenance provided
under this agreement shall include the
cost of maintenance, labor and
replacement parts, excluding supplies
and maintenance kits, necessary to
keep the equipment in good condition.
*Accessories cannot be purchased separately
on Schedule. Accessories are available only
on an open market basis. If a customer
needs to order accessories only, a separate
open market purchase order must be issued.
MAINTENANCE PRICING
SIN 132-12
Up to 49 miles
MODEL
DESCRIPTION
1+ UNITS
MONTHLY MAINTENANCE
FS-C5250DN
28 P.P.M. Color Laser Printer
$ 1,028.00
$ 28.00/mo.
ACCESSORIES
PF-520
500 Sheet Paper Feeder (maximum 2)
281.00
3.00/mo.
PF-530
500 Sheet Multipurpose Feeder (maximum 2)
373.00
3.00/mo.
The FS-C5250DN Color Printer
delivers 28 page per minute
speeds (in color and black) and
great color quality. With the long
life imaging drum, high yield toner
and industry-leading maintenance
intervals, your business can realize
significant printing and operating
costs that help your company’s
bottom line. Standard networking
lets you share and manage the
printer efficiently. Standard
2-Sided duplex printing can cut your
paper use significantly. You have
flexibility for printing new types of
documents on heavy or coated
paper stocks from up to 5 multiple
sized paper sources.
SPECIFICATIONS AT A GLANCE
• Speed: 28/28 Pages Per Minute
• Function: Print
• Max Monthly Duty Cycle: 65,000 Pages Per Month
• Resolution: 600 x 600 dpi, 9,600 x 600 multi bit Interpolated Resolution
• Standard Paper Supply: 500 Sheet Drawer, 50 Sheet Multipurpose Tray (MPT)
• Max Paper Size: 8.5" x 14"
• Original Size: 8.5" x 14"
• Duplexing: Standard
• Network Connectivity: Standard 10/100BaseTX
• PDL: PCL6 (PCL5c, PCLXL), KPDL (PS3), PRESCRIBE
FS-C5250DN NETWORK COLOR PRINTER
FS-C5250DN - Purchase -
SIN 132-8
NOTE: The
Printer warranty
is for 1 year or
200,000 prints, whichever comes first,
from the initial date of installation.
The warranty includes Parts, Labor,
and On-Site Service. Supplies and
maintenance kits are excluded.
Maintenance Kits are required, at
scheduled intervals, for a warranty
to remain valid. Installation of
maintenance kits are the customers
responsibility.
Maintenance Kits
are guaranteed
for 3 years or 200,000 prints,
whichever comes first.
*Accessories cannot be purchased separately
on Schedule. Accessories are available only
on an open market basis. If a customer
needs to order accessories only, a separate
open market purchase order must be issued.
MAINTENANCE PRICING
SIN 132-12
Up to 49 miles
MODEL
DESCRIPTION
1+ UNITS
MONTHLY MAINTENANCE
FS-9530DN
51 P.P.M. Laser Printer System
$ 2,914.00
$ 29.00/mo.
ACCESSORIES
PF-700
Dual 500 Sheet Drawer
743.00
3.00/mo.
PF-750
3,000 Sheet Drawer
797.00
3.00/mo.
DF-710
3,000 Sheet Finisher 0(requires AK-705)
1,511.00
7.00/mo.
DF-730
1,000 Sheet Finisher (requires AK-705)
809.00
7.00/mo.
BF-710
Booklet Folder for DF-710
866.00
7.00/mo.
MT-710
Multi Tray for DF-710
578.00
7.00/mo.
PH-5A
Punch Unit (2/3 Hole) for DF-710
387.00
3.00/mo.
Data Security Kit C
HDD Erase Kit for Print
335.00
-
AK-705
DF-710/730Attachment for FS-9130DN/9530DN
35.00
-
Stand
Stand for FS-9130DN/9530DN
113.00
-
HD-ME5
20.0 GB Hard Disk Drive Unit
277.00
2.00/mo.
IB-11
Serial Interface
17.00
-
IB-23
Secure Network Interface
213.00
-
SD-100-512B
512 MB Print Memory Upgrade - 100 Pin DIMM 577.00
-PCL Barcode
Flash Module
CF Card PCL Barcode Flash Module
246.00
-
Surge Protector
15 Amp Surge Protector Item #82143015
136.00
-
Enterprise Network Monochrome
Printer with standard Duplex,
500 x 2 Sheet Universal Paper
Drawers and a 200 Sheet
Multipurpose Tray. Standard
Network Interface. Standard
128MB RAM, upgradeable to
640MB, optional 40GB HDD.
Optional Paper Handling and
Finishing.
SPECIFICATIONS AT A GLANCE
• Speed: 51 Pages Per Minute
• Function: Print
• Max Monthly Duty Cycle: 300,000 Pages Per Month
• Resolution: Fast 1200 Mode (1800 x 600 dpi), 600 x 600 DPI, 300 x 300 DPI (ECO)
• Standard Paper Supply: 500 x 2, 200 Sheet MPT
• Max Paper Size: 11" x 17"
• Max Paper Weight: Up to 110 lb. Index
• Original Size: 11" x 17"
• Duplexing: Standard
• Network Connectivity Standard: 10/100BaseTX, Parallel, Hi-Speed USB 2.0; Standard USB
Host (Full Speed); Optional Serial
• PDL: PRESCRIBE, PCL 6 (XL, 5e), KPDL3 (PS3), KCGL (HPGL/2), Diablo 630, IBM ProPrinter X24,
Epson LQ850, Line Printer
FS-9530DN MODULAR LASER PRINTING SYSTEM
FS-9530DN MODULAR LASER PRINTING SYSTEM - Purchase -
SIN 132-8
NOTE: The
Printer warranty
is for 1 year or
500,000 prints, whichever comes first,
from the initial date of installation.
The warranty includes Parts, Labor,
and On-Site Service. Supplies and
maintenance kits are excluded.
Maintenance Kits are required, at
scheduled intervals, for a warranty
to remain valid. Installation of
maintenance kits are the customers
responsibility.
Maintenance Kits
are guaranteed
for 3 years or 500,000 prints,
whichever comes first.
*Accessories cannot be purchased separately
on Schedule. Accessories are available only
on an open market basis. If a customer
needs to order accessories only, a separate
open market purchase order must be issued.
MODEL
DESCRIPTION
GSA PRICE
FS-1035MFP/DP
37 P.P.M. A3 Monochrome MFP 3 in 1 model
(copy, print, color scan)
$ 740.00
ACCESSORIES
*
PF-120
250 Sheet Paper Cassette
95.00
IB-23 (SET)
10/100 Base TX, IPV6
213.00
Copier Stand
Stand (Pure White)
183.00
SD-144-512 (A)
512 MB Print Memory Upgrade - 100 Pin DIMM
195.00
Surge Protector
15 Amp Surge Protector Item #82143015
135.00
With a fast output speed of 37
ppm, the ECOSYS FS-1035MFP/DP
provides exceptional functionality
with standard network print, copy,
and color scan features, in the
compact footprint of a traditional
printer.
SPECIFICATIONS AT A GLANCE
• Speed : 37 Pages Per Minute
• Standard Network Print, Scan and Copy
• Max Monthly Duty Cycle : 50,000 Pages Per Month
• Resolution : 1200 x 1200 dpi
• Standard Paper Supply: 250 Sheet Drawer; 50 Sheet Multipurpose Tray
• Duplexing: Standard
• PDL: PRESCRIBE.PCL6, (PCL5e, PCLXL) KPDL3, PDF1.5, XPS, Line Printer, IBM Proprinter X24E,
EPSON LQ850, DIABLO 630
FS-1035MFP/DP
SIN 132-8
FS-1035MFP/DP MULTIFUNCTIONAL PRINTER
*Accessories cannot be purchased
separately on Schedule. Accessories are
available only on an open market basis.
If a customer needs to order accessories
only, a separate open market purchase
order must be issued.
Annual Maintenance
SIN 132-12
up to 49 miles, $8.73 per month.
Maintenance is for 1 year or 20,000
copies, whichever comes first.
MODEL
DESCRIPTION
GSA PRICE
FS-1135MFP
37 P.P.M. A3 Monochrome MFP 4 in 1 model
(copy, print, color scan, fax)
$ 833.00
ACCESSORIES
*
PF-120
250 Sheet Paper Cassette
95.00
IB-23 (SET)
10/100 Base TX, IPV6
213.00
Copier Stand
Stand (Pure White)
183.00
SD-144-512 (A)
512 MB Print Memory Upgrade - 100 Pin DIMM
195.00
Surge Protector
15 Amp Surge Protector Item #82143015
135.00
With a fast output speed of 37
ppm, the ECOSYS FS-1135MFP
provides exceptional functionality
with standard network print, copy,
fax and color scan features, in the
compact footprint of a traditional
printer.
SPECIFICATIONS AT A GLANCE
• Speed : 37 Pages Per Minute
• Standard Network Print, Scan, Copy and Fax/Network Fax
• Max Monthly Duty Cycle : 50,000 Pages Per Month
• Resolution : 1200 x 1200 dpi
• Standard Paper Supply: 250 Sheet Drawer; 50 Sheet Multipurpose Tray
• Duplexing: Standard
• PDL: PRESCRIBE.PCL6, (PCL5e, PCLXL) KPDL3, PDF1.5, XPS, Line Printer, IBM Proprinter X24E,
EPSON LQ850, DIABLO 630
• Fax Modem Speed: 33.6kbps
• Fax Memory: 3.5MB
FS-1135MFP
SIN 132-8
FS-1135MFP MULTIFUNCTIONAL PRINTER
*Accessories cannot be purchased
separately on Schedule. Accessories are
available only on an open market basis.
If a customer needs to order accessories
only, a separate open market purchase
order must be issued.
Annual Maintenance
SIN 132-12
up to 49 miles, $10.48 per month.
Maintenance is for 1 year or 24,000
copies, whichever comes first.
MODEL
DESCRIPTION
GSA PRICE
FS-3640MFP
42 P.P.M. A4 Monochrome MFP 4 in 1 Model
(copy, print, scan, fax)
$ 2,059.00
ACCESSORIES
PF-310+
500 Sheet Paper Feeder (max.3)
176.00
CF-4G
4 GB Compact Flah Memory (required for HyPas Application)
31.00
SD-144-1(A)
1 GB Print Memory Upgrade - 100 Pin DIMM
195.00
Card Reader
Holder (C)
Card Reader Attachment
36.00
Netgard MFD
CAC Netgard MFD (Scan Block ONLY Network Connection)
928.00
Copier Stand (A4)
Stand
168.00
Surge Protector
15 Amp Surge Protector Item #82143015
135.00
FS-3640MFP
SIN 132-8
With a fast output speed of 42 ppm, the
Kyocera exceptional image quality at highly
efficient print speeds of 42 pages per
minute combine with superior scanning,
copy, and fax capabilities to boost
produc-tivity. Advanced integrated business
appli-cations enable the device to transcend the
boundaries of traditional multifunctional
printers, creating powerful solutions that
fuel performance while simplifying
docu-ment workflow. Kyocera's advanced,
award-winning ECOSYS technology is well
regarded as a cost-effective and highly
reliable solution. Energy use has been
reduced and most replacement parts
elimi-nated or replaced with long life
compo-nents. As a result, with the FS-3640MFP you
are able to enjoy the benefits of document
imaging devices that lower operating costs,
minimize downtime, and maximize efficiency.
SPECIFICATIONS AT A GLANCE
• Speed: 42 Pages Per Minute
• Functions: Standard Network Print, Scan, Copy and Fax/Network Fax
• Max Monthly Duty Cycle: 200,000 Pages Per Month
• Standard Paper Supply: 500 Sheet Drawer; 100 Sheet Multipurpose Tray
• Resolution: 600 x 600 dpi
• Original Size: 8.5” x 14”
• Duplexing: Standard
• Network Connectivity: Standard 10/100/1000BaseTX, USB
• Fax Modem Speed: 33.6kbps
• Fax Memory: 3.5MB
FS-3640MFP MULTIFUNCTIONAL PRINTER
*Accessories cannot be purchased
separately on Schedule. Accessories are
available only on an open market basis.
If a customer needs to order accessories
only, a separate open market purchase
order must be issued.
Annual Maintenance
SIN 132-12
up to 49 miles, $8.06 per month.
Maintenance is for 1 year or 60,000
copies, whichever comes first.
*Accessories cannot be purchased
separately on Schedule. Accessories are
available only on an open market basis.
If a customer needs to order accessories
only, a separate open market purchase
order must be issued.
Annual Maintenance
SIN 132-12
up to 49 miles, $29.39 per month.
Maintenance is for 1 year or 125,000
copies, whichever comes first.
MODEL
DESCRIPTION
GSA PRICE
TASKalfa 3550ci
35/35 P.P.M. Digital A3 Color MFP
$ 6,282.00
ACCESSORIES
*
DP-770
Reversing Automatic Document Processor (RADF)
819.00
DP-771
Dual Scan Document Processor (DSDP)
1,040.00
DF-790
4,000 Sheet Staple Finisher- (Requires AK-730)
1,444.00
DF-770
1,000 Sheet Staple Finisher- (Requires AK-730)
889.00
PF-780
500 Sheet Side Multi-Media Tray
482.00
PF-730
500 Sheet x 2 Drawers
744.00
PF-740
1,500 Sheet x 2 Drawers
797.00
PF-770
3,000 Large Capacity Drawer
819.00
PH-7A
Punch Unit for DF-790
387.00
BF-730
Booklet Folder and Tri Folding for DF-790
866.00
MT-730
Mail Box for DF-790
578.00
JS-730
Inner Job Separator (can not be install with DF-790/DF-770)
110.00
JS-731
Outer Job Separator
110.00
Fax System (V)
Fax System
667.00
Keyboard Holder (A)
Keyboard Tray Kit
65.00
Internet Fax (A)
Internet Fax Kit (requires Fax System (V) )
173.00
Data Security (E)
Data Security
335.00
Print Document
Guard Kit (A)
Print Document Guard Kit
667.00
Printing System (11)
EFI FIERY Controller w/ Spot-On (requires Printing System Interface Kit (A))
2,590.00
Printing System
Interface Kit for Printing System (12),
Interface Kit (A)
including mounting kit and circuit board
433.00
AK-730
DF-770/DF-790 Attachment Kit
92.00
UG-34
Optional Printer Emulation for IBM Prorinter, Epson LQ-850, Diabro 630
323.00
Card Reader Holder (B)
HID Card Reader Holder for Card Authentication Kit(B)
51.00
IB-50
Gigabit Ether Net Board
258.00
MM-16-128
128MB Fax Memory Board
116.00
DT-730
Original Hard Copy Holder
26.00
Netguard MFD
CAC Netguard MFD (Scan Block ONLY Network Connection)
928.00
MFP Interface Cable
MFP Interface Cable (Required for Full Scan, Copy & Fax Locking Capability)
41.00
Parts Key Counter Wire
Parts Key Counter Wire (Required for Full Scan, Copy & Fax Locking Capability)
-Original Holder
Platen Cover
68.00
Copier Stand
Stand (Venus)
208.00
Surge Protector
15 Amp Surge Protector Item #82143015
135.00
The Kyocera TASKalfa 3550ci takes
flexi-bility and performance to new heights.
Designed specifically with the customer
in mind, the TASKalfa 3550ci incorporates
high productivity and flexible
configura-tions with exceptional imaging and
advanced finishing to easily handle both
your day-to-day document needs as well
as more | complex projects with ease.
Vibrant color technology enables you to
create finished pieces with professional
polish, while integrated business
applica-tions provide the added power and
capa-bilities to help your business simplify its
document workflow.
Kyocera's award-winning ultra-reliability
and unique long-life technology ensure
the superior performance and proven
pro-ductivity your busy enterprise requires to
keep it up and running at maximum
effi-ciency. When it comes to document
imag-ing innovation and quality you can count
on, the TASKalfa 3550ci delivers.
The TASKalfa 3550ci Color MFP…
document imaging innovation for
your office.
SPECIFICATIONS AT A GLANCE
• Speed: 35/35 Pages Per Minute
• Functions: Standard Network Print, Scan, Copy and Document Box
Optional Fax/Network Fax, Dual Fax
• Max Monthly Duty Cycle: 175,000 Pages Per Month
• Resolution: 600 x 600 dpi, 9600 x 600 dpi interpolated / 8 bit color depth
• Standard Paper Supply: 1,150 Sheets
• Max Paper Size: 12" x 18" (Trays and MPT); 12" x 47" Banner (MPT)
• Max Paper Weight: 120 lb Index (Trays); 110 lb Cover (MPT)
• Original Size: 11" x 17"
• Duplexing: Standard Embedded Duplex
• Network Connectivity: 10/100/1000BaseTX; High Speed USB 2.0
• PDL: PRESCRIBE, PCL6 (XL, 5c), KPDL (PS3)
• Fax Modem Speed: 33.3 kbps
• Fax Memory: 12 MB Std, 120 MB Max
TASKalfa 3550ci
SIN 132-8
MODEL
DESCRIPTION
GSA PRICE
TASKalfa 6550ci
65/65 P.P.M. Digital A3 Color MFP
$ 16,376.00
ACCESSORIES
*
DF-790
4,000 Sheet Staple Finisher
1,444.00
PF-780
500 Sheet Side Multi-Media Tray
482.00
PF-730
500 Sheet x 2 Drawers
744.00
PF-740
1,500 Sheet x 2 Drawers
797.00
PF-770
3,000 Large Capacity Drawer
819.00
PH-7A
Punch Unit for DF-790
387.00
BF-730
Booklet Folder and Tri Folding for DF-790
866.00
MT-730
Mail Box for DF-790
578.00
Fax System (V)
Fax System
667.00
Keyboard Holder (A)
Keyboard Tray Kit
65.00
Internet Fax (A)
Internet Fax Kit (requires Fax System (V) )
173.00
Data Security (E)
Data Security
335.00
Print Document
Guard Kit (A)
Print Document Guard Kit
667.00
Printing System (12)
EFI FIERY Controller w/ Spot-On
(requires Printing System Interface Kit (A))
4,118.00
Printing System
Interface Kit for Printing System (12),
Interface Kit (A)
including mounting kit and circuit board
433.00
UG-34
Optional Printer Emulation for IBM Prorinter, Epson LQ-850, Diabro 630
323.00
Card Reader Holder (B)
HID Card Reader Holder for Card Authentication Kit(B)
51.00
IB-50
Gigabit Ether Net Board
258.00
MM-16-128
128MB Fax Memory Board
116.00
DT-730
Original Hard Copy Holder
26.00
Netguard MFD
CAC Netguard MFD (Scan Block ONLY Network Connection)
928.00
MFP Interface Cable
MFP Interface Cable
(Required for Full Scan, Copy & Fax Locking Capability)
41.00
Parts Key Counter Wire
Parts Key Counter Wire
(Required for Full Scan, Copy & Fax Locking Capability)
-Surge Protector
20 Amp Surge Protector Item #82143020
155.00
Designed specifically with the customer in
mind, the TASKalfa 6550ci incorporates the
flexibility to tackle both your day-to-day
document imaging needs as well as more
complex color projects with ease, through
highly productive functionality and superior
document handling. Robust finishing
fea-tures and vibrant color technology bring
the professional polish your output
deserves, while integrated business
applications provide added power and
capabilities to transform your document
workflow and simplify your business
processes.
Kyocera's award-winning ultra-reliability
and unique long-life technology ensure
the superior performance and proven
productivity your busy enterprise requires
to keep it up and running at maximum
efficiency. When it comes to document
imaging innovation and quality you can
count on, the TASKalfa 6550ci delivers.
The TASKalfa 6550ci Color MFP…
document imaging innovation for
your office.
SPECIFICATIONS AT A GLANCE
• Speed: 65/65 Pages Per Minute
• Functions: Standard Network Print, Scan, Copy and Document Box
Optional Fax/Network Fax, Dual Fax
• Max Monthly Duty Cycle: 350,000 Pages Per Month
• Resolution: 600 x 600 dpi, 9600 x 600 dpi interpolated / 8 bit color depth
• Standard Paper Supply: 4,150 Sheets
• Max Paper Size: 12" x 18" (Trays and MPT); 12" x 47" Banner (MPT)
• Max Paper Weight: 140 lb Index (Trays); 110 lb Cover (MPT)
• Original Size: 11" x 17"
• Duplexing: Standard Embedded Duplex
• Network Connectivity: 10/100/1000BaseTX; High Speed USB 2.0
• PDL: PRESCRIBE, PCL6 (XL, 5c), KPDL (PS3)
• Fax Modem Speed: 33.3 kbps
• Fax Memory: 12 MB Std, 120 MB Max
TASKalfa 6550ci
SIN 132-8
TASKalfa 6550ci
COLOR MFP
*Accessories cannot be purchased
separately on Schedule. Accessories are
available only on an open market basis.
If a customer needs to order accessories
only, a separate open market purchase
order must be issued.
Annual Maintenance
SIN 132-12
up to 49 miles, $105.79 per month.
Maintenance is for 1 year or 300,000
copies, whichever comes first.
Available under GSA contract #GS-25F-0062M
SIN 51-101-2
Model
Cart.
Cart.
Case
Case
Case
Description
Cost
Yield
Qty.
Cost
Yield
FS-1010
TK-17 Toner
64.00
6,000
24 ctg
1,544.00 144,000
FS-1010N
TK-17 Toner
64.00
6,000
24 ctgs
1,544.00 144,000
FS-1010N
TK-132 Toner
72.00
7,200
24 ctgs
1,730.00 172,800
FS-1028MFP/DP/1128MFP
TK-132 Toner
72.00
7,200
24 ctgs
1,730.00 172,800
MK-132
1 Kit
146.00 100,000
FS-1800/1800N/1800+/1800N+/3800/3800N
TK-60
84.00
20,000
15 ctgs
1,257.00 300,000
FS-1920
TK-57
75.00
15,000
15 ctgs
1,119.00 225,000
FS-2000D
TK-312 Toner
59.00
12,000
15 ctgs
891.00 180,000
FS-2020D
TK-342 Toner
71.00
12,000
15 ctgs
1,069.00 180,000
FS-3820N
TK-67 Toner
74.00
20,000
15 ctgs
1,114.00 300,000
FS-3830N
TK-67 Toner
74.00
20,000
15 ctgs
1,114.00 300,000
FS-4000DN
TK-332 Toner
69.00
20,000
15 ctgs
1,035.00 300,000
FS-4020DN
TK-362 Toner
76.00
20,000
15 ctgs
1,134.00 300,000
FS-9100/9500
TK-70
118.00
40,000
4 bottles
428.00 160,000
FS-9120/9520
TK-70
118.00
40,000
4 bottles
428.00 160,000
FS-C5015N/C5030N
TK-522K Toner (black)
70.00
6,000
15 ctnr
1,053.00
90,000
TK-522C Toner (cyan)
69.00
4,000
15 ctnr
1,030.00
60,000
TK-522M Toner (magenta)
69.00
4,000
15 ctnr
1,030.00
60,000
TK-522Y Toner (yellow)
69.00
4,000
15 ctnr
1,030.00
60,000
FS-C5020N/C5025N
TK-512K Toner (black)
54.00
8,000
15 ctnr
809.00 120,000
TK-512C Toner (cyan)
82.00
8,000
15 ctnr
1,224.00 120,000
TK-512M Toner (magenta)
82.00
8,000
15 ctnr
1,224.00 120,000
TK-512Y Toner (yellow)
82.00
8,000
15 ctnr
1,224.00 120,000
FS-C5200N
TK-552K Toner (black)
83.00
7,000
15 ctnr
1,247.00 105,000
TK-552C Toner (cyan)
95.00
6,000
15 ctnr
1,426.00 90,000
TK-552M Toner (magenta)
95.00
6,000
15 ctnr
1,426.00 90,000
TK-552Y Toner (yellow)
95.00
6,000
15 ctnr
1,426.00 90,000
D
FS-C5250DN
TK-592K Toner (black)
79.00
7,000
15 ctnr
1,181.00 105,000
TK-592C Toner (cyan)
80.00
6,000
15 ctnr
1,202.00 90,000
TK-592M Toner (magenta)
80.00
6,000
15 ctnr
1,202.00 90,000
TK-592Y Toner (yellow)
80.00
6,000
15 ctnr
1,202.00 90,000
MK-590
-
-
1 Kit
556.00 200,000
FS-C5300DN
TK-512K Toner (black)
96.00
12,000
15 ctnr
1,445.00 180,000
TK-512C Toner (cyan)
138.00
10,000
15 ctnr
2,070.00 150,000
TK-512M Toner (magenta)
138.00
10,000
15 ctnr
2,070.00 150,000
TK-512Y Toner (yellow)
138.00
10,000
15 ctnr
2,070.00 150,000
MK-560
-
-
1 Kit
593.00 200,000
FS-C5400DN
TK-572K Toner (black)
115.00
16,000
15 ctnr
1,728.00 240,000
TK-572C Toner (cyan)
151.00
12,000
15 ctnr
2,268.00 180,000
TK-572M Toner (magenta)
151.00
12,000
15 ctnr
2,268.00 180,000
TK-572Y Toner (yellow)
151.00
12,000
15 ctnr
2,268.00 180,000
MK-570
-
-
1 Kit
1,070.00 300,000
Model
Cart.
Cart.
Case
Case
Case
Description
Cost
Yield
Qty.
Cost
Yield
FS-C8100DN
TK-822K Toner (black)
46.00
15,000
10 ctnr
462.00 150,000
TK-822Y Toner (yellow)
70.00
7,000
10 ctnr
699.00 70,000
TK-822M Toner (magenta)
70.00
7,000
10 ctnr
699.00
70,000
TK-822C Toner (cyan)
70.00
7,000
10 ctnr
699.00
70,000
SH-10 Staples for DF-710(A)
-
5,000
3 ctgs
34.00
15,000
Staples Staples for DF-730
-
5,000
3 ctgs
44.00
15,000
TASKalfa 250ci/300ci/500ci
TK-867K Toner (black)
71.00
15,000
8 ctgs
568.00 160,000
TK-867Y Toner (yellow)
73.00
7,000
9 ctgs
659.00 108,000
TK-867M Toner (magenta)
73.00
7,000
9 ctgs
659.00 108,000
TK-867C Toner (cyan)
73.00
7,000
9 ctgs
659.00 108,000
MK-865A
-
-
1 Unit
862.00 300,000
MK-865B
-
-
1 Unit
918.00 300,000
Staples for DF-760/BF-720
-
5,000
3 ctgs
38.00
15,000
TASKalfa 400ci/500ci
TK-867K Toner (black)
58.00
15,000
8 ctgs
462.00 160,000
TK-867Y Toner (yellow)
78.00
7,000
9 ctgs
699.00 108,000
TK-867M Toner (magenta)
78.00
7,000
9 ctgs
699.00 108,000
TK-867C Toner (cyan)
78.00
7,000
9 ctgs
699.00 108,000
MK-865A
-
-
1 Unit
862.00 300,000
MK-865B
-
-
1 Unit
918.00 300,000
Staples for DF-760/BF-720
-
5,000
3 ctgs
38.00
15,000
TASKalfa 7550ci
TK-8707K Toner (Black)
205.00
70,000 4 Containers
821.00 280,000
TK-8707Y Toner (Yellow)
148.00
30,000 6 Containers
888.00 180,000
TK-8707M Toner (Magenta)
148.00
30,000 6 Containers
888.00 180,000
TK-8707C Toner (Cyan)
148.00
30,000 6 Containers
888.00 180,000
MK-8705A
-
-
1Kit
653.00 600,000
MK-8705B
-
-
1Kit
1,294.00 600,000
MK-8705C
-
-
1Kit
394.00 300,000
WT-861
-
-
5 Bottles
123.00 125,000
Staples for DF-770/BF-730
-
-
3 Cartridges
38.00 15,000
Staples for DF-790
-
-
3 Cartridges
67.00 15,000
TASKalfa 3050ci
TK-8307K Toner (Black)
95.00
25,000 9 Cartridges
853.00 225,000
TK-8307Y Toner (Yellow)
89.00
15,000 9 Cartridges
800.00 135,000
TK-8307M Toner (Magenta)
89.00
15,000 9 Cartridges
800.00 135,000
TK-8307C Toner (Cyan)
89.00
15,000 9 Cartridges
800.00 135,000
MK-8305A
-
-
1Kit
739.00 600,000
MK-8305B
-
-
1Kit
1,833.00 600,000
MK-8305C
-
-
1Kit
493.00 300,000
WT-850
-
-
10 Bottles
99.00 250,000
Staples for DF-770/BF-730
-
-
3 Cartridges
38.00 15,000
Staples for DF-790
-
-
3 Cartridges
67.00 15,000
TASKalfa 4550ci
TK-8507K Toner (Black)
103.00
30,000 9 Cartridges
931.00 270,000
TK-8507Y Toner (Yellow)
110.00
20,000 9 Cartridges
986.00 180,000
TK-8507M Toner (Magenta)
110.00
20,000 9 Cartridges
986.00 180,000
TK-8507C Toner (Cyan)
110.00
20,000 9 Cartridges
986.00 180,000
MK-8505A
-
-
1Kit
739.00 600,000
MK-8505B
-
-
1Kit
1,833.00 600,000
MK-8505C
-
-
1Kit
493.00 300,000
WT-860
-
-
10 Bottles
99.00 250,000
Staples for DF-770/BF-730
-
-
3 Cartridges
38.00 15,000
Staples for DF-790
-
-
3 Cartridges
67.00 15,000
TASKalfa 5550ci
TK-867K Toner (Black)
71.00
20,000 8 Cartridges
568.00 160,000
TK-867Y Toner (Yellow)
73.00
12,000 9 Cartridges
659.00 108,000
TK-867M Toner (Magenta)
73.00
12,000 9 Cartridges
659.00 108,000
TK-867C Toner (Cyan)
73.00
12,000 9 Cartridges
659.00 108,000
MK-865A
-
-
1Kit
862.00 300,000
MK-865B
-
-
1Kit
918.00 300,000
Staples for DF-760/BF-720
-
-
3 Cartridges
38.00 15,000
KYOCERA Document Solutions America, Inc.
National Accounts
SCHEDULE and PRICE LIST
Printers
Contract Number:
GS-35F-0041L
Contract Option Period 2: October 1, 2000 - September 30, 2015
Up to and including Modification PO-0099
KYOCERA DOCUMENT SOLUTIONS AMERICA, INC.
225 SAND ROAD PO BOX 40008 FAIRFIELD, NJ 07004-0008 (973) 808-8444 Fax: (973) 882-4411