• No results found

Experimental Study of the Bond Behaviour of Steel FRP-Concrete Joints and Shear Behavior of Concrete Beams Reinforced with GFRB Bars

N/A
N/A
Protected

Academic year: 2021

Share "Experimental Study of the Bond Behaviour of Steel FRP-Concrete Joints and Shear Behavior of Concrete Beams Reinforced with GFRB Bars"

Copied!
237
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Table 2.4: Result of cube test  No. of  samples  Low strength (N/mm2)  Normal strength (N/mm2)  High strength (N/mm2)
Figure 2.10: Typical GFRP bar tensile test specimen with end anchors
Figure 2.13: Curing process and removing the beams from the formworks
Figure 2.14: Schematic diagram of the test setup for the beam
+7

References

Related documents

Several issues that can be highlighted based on the most three important components; (1) constraints, (2) solution algorithm and (3) datasets in solving delivery routing

For example, rater variability may take the form of (a) differences in rater severity or leniency, (b) differences in raters’ understanding and use of rating scale categories,

Pallavi Patel College of Health Care Sciences; Derek Burkholder, Ph.D., research scientist at the Guy Har- vey Research Institute; Sarah Milton, Ph.D., associate professor in

„ Calculate the maximum increase in fixed marketing and distribution costs that will allow Tocchet to reduce the selling price to $99 and maintain its operating income. „ Let

In the North Denmark region general practice, a complex strategy for new low back pain guideline implementation will be tested to study behaviour change (professional practice)

In this report, we evaluated the humoral immune response induced by the live spore anthrax vaccine in Boer goats using the anti-PA ELISA, an in  vitro toxin neutralization

There- fore, this clinical study aimed to investigate the long-term efficacy of an antibacterial monomer-containing primer when used with an adhesive-coated bracket system to pre-

International Research Journal of Engineering and Technology (IRJET) e ISSN 2395 0056 Volume 02 Issue 03 | June 2015 www irjet net p ISSN 2395 0072 ? 2015, IRJET NET All Rights