Actuators and Sensors
1
2
3
4
Pneumatic solenoid valves for mobile aPPlications
>
Double Pneumatic Solenoid Valve Block
01
>
Multiple Pneumatic Valve Block
02
>
Pneumatic Solenoid Valve 2.2 mm | 2.0 mm | 0.8 mm
03-05
Wet Pin solenoids for HYdraulic valves
>
Wet Pin On/Off DC Solenoids NG6
06- 08
>
Coil NG6
09
>
Wet Pin Proportional Solenoid NG6
10
>
Proportional Solenoid w/ LVDT NG6
11-12
>
Wet Pin Proportional Square Solenoids NG6
13-14
>
Wet Pin On/Off DC Solenoid NG10
15
>
Coil NG10
16
>
Wet Pin Proportional Square Solenoids NG10
17-18
>
Proportional Solenoid w/ LVDT NG10
19-20
distance sensors for Wet Pin solenoids
>
LVDT (Linear Variable Differential Transformer)
21
>
Position Switch for Core Tubes
22
dc solenoids
>
C-Frame Solenoid
23
>
D-Frame Solenoid
24
>
Push/Pull DC Solenoid, closed Type
25
Pressure sensors for mobile aPPlications
>
Pressure Sensor
26 -27
customiZed Products
>
Individual and customized Products
28
5
6
double Pneumatic
solenoid valve block
Part no. d60 23 00X 02tecHnical data
1
Pneumatic solenoid valves
D60 23 00X 02
Nominal Voltage 12 V Working Pressure 17 bar Thermal Range of Operation -40 to +80 °C Max. Environmental Temperature 110 °C/h Duty Cycle 33%/5 min Nozzle Width 0.9 mm Pneumatic Connectors Ports 1&2 Voss, d=4.0 mm Pneumatic Connector Port P Legris, d=4.0 mm Electrical Connector Kostal
Protection Class (With Mating Connector) IP6K8
1
aPPlication
features
2x 2/2 valves
Prepared for chassis mounting in mobile applications
equipped with connectors for 4 mm Pa tubes, others on request Proven in car air suspension systems, can be used for other applications
typically used for two-corner air suspension in passenger cars and light commercial vehicles.
double Pneumatic
solenoid valve block
Pneumatic solenoid valves
multiPle Pneumatic
solenoid valve block
Part no. d78 230 0X 02aPPlication
features
integrated valve block features up to five solenoid valves and one pressure sensor integrated into one housing
5x 2/2 valves, can also be equipped with 1-4x 2/2 valves Prepared for chassis mounting in mobile applications equipped with connectors for 4mm / 6mm Pa tubes Proven in car and lcv air suspension systems, can be used for other applications
typically used for four-corner or two-corner air suspension systems in passenger cars and light commercial vehicles
tecHnical data
D60 23 00X 02Nominal Voltage 12 V Working Pressure 15 bar Thermal Range of Operation -40 to +80 °C Max. Environmental Temperature 110 °C/h Duty Cycle 33%/5 min
Nozzle Width 4x0.9 mm – 1x1.2 mm Pneumatic Connectors Ports 1-5 Voss, d=4.0 mm Pneumatic Connector Port P Legris, d=6.0 mm Electrical Connector FEP
Pressure Sensor Supply Voltage 5 ± 0.2 V Pressure Sensor Pressure Range (abs.) 0.85 to 22.85 bar Pressure Sensor Output 0.5 to 4.5 V Pressure Sensor Accuracy <1.5% (-20 to +60°C)
2
Pneumatic solenoid 3/2
standalone valve, 2.2 mm
Part no. type 547 (available 2012)aPPlication
Pressure resistant dc solenoid valve for air and other fluids
tecHnical data
No. Type 547 Nominal Voltage 12 to 24 V Nominal Power at 100% ED 6.9 W Inlet Orifice 2.2 mm Outlet Orifice 3.0 mm Working Pressure 0 to 12.5 bar Ambient Temperature -40 to + 80 °C Variants 2/2-, 3/2-ValveNC or NO
features
2/2- or 3/2-valve variants possible with different electric and pneumatic interfaces, coil with isolation class H din en 175301-803a
class of protection iP67 and iP6K9K voltage and interface variants on demand
3
dimensions
Pneumatic solenoid 3/2
standalone valve, 2.2 mm
4
Pneumatic solenoid valves
Pneumatic solenoid
valve, 2.0 mm
Part no. type 531
aPPlication
tecHnical data
2/2- or 3/2-valve with different interfaces possible as no- or nc-version, special version for medical applications with high internal corrosion protection
valve sealing of FKm, other materials are possible different voltages possible
coil with isolation class B din en 175301-803a class of protection iP00
Pressure resistant dc solenoid valve for low-pressure-fluids and vacuum
dimensions
tecHnical data
No. Type 531 Nominal Voltage 6 to 48 V Nominal Power at 100% ED 6.5 W Inlet Orifice 2.0 mm Outlet Orifice 2.0 mm Working Pressure 0 to 1 bar Ambient Temperature +10 to + 50 °C Variants 2/2-, 3/2-ValvePart no. c46 13 045 04
dimensions
Wet Pin on/off dc
solenoid-nG 6
aPPlication features
Quick response time Push type
mounting central thread m 20×1
exchange of the coil without opening the hydraulic circuit manual override function
insulation class of coil: F (H available on request) core tube diameter = 23 mm
electrical connector acc. to din en 175301-803 a enclosure protection: iP65
designed for directional hydraulic valves with wet pin
tecHnical data
C46 13 045 04Nominal Voltage 24 V Nominal Resistance at 20°C 19 Ω ± 5% Working Stroke 2.8 mm Total Stroke (min.) 6.0 mm Nominal Current 1.25 A Nominal Power at 20°C 30 W Pressure Resistance (dyn.) 210 bar Ambient Temperature -30 to +50 °C
6
Pneumatic solenoid
valve, 0.8 mm
condition: 90% nominal voltage and warmed up, ambient temperature 50 °c.
force vs stroke curve
Pneumatic solenoid valves
Wet Pin solenoids
2
Wet Pin on/off dc
solenoid-nG6
Part no. c46 13 046 04
force vs stroke curve
aPPlication
designed for directional hydraulic valves with wet pin
features
Push type
small hysteresis and quick response time mounting central thread m 19×1 emergency manual override
insulation class of coil: F (class H available on request) electrical connector acc. to din en 175301-803 a enclosure protection class: iP65
core tube diameter = 22 mm
dimensions
tecHnical data
C46 13 046 04 Nominal Voltage 24 V Working Stroke 4.0 mm Total Stroke 7.0 mm Nominal Solenoid Force See F-S curve Nominal Current 1.4 A Nominal Resistance at 20°C 17.6 Ω ± 5% Pressure Resistance (dyn.) 210 bar7
2
Wet Pin solenoids
Wet Pin on/off dc
solenoid-nG6
Wet Pin on/off dc
solenoid-nG6
Part no. 106 576 XX
force vs stroke curve
tecHnical data
106 576 XXNominal Voltage 24 V Working Stroke 2.5 mm Total Stroke (min.) 5.6 mm Nominal Solenoid Force 35 N Nominal Current 0.8 A
Nominal Resistance at 20°C 21.8 Ω ± 7,5% Pressure Resistance (dyn.) 210 bar
aPPlication features
Push type
small hysteresis and quick response time mounting central thread m 19×1 emergency manual override
insulation class of coil: F (class H available on request) electrical connector acc. to din en 175301-803 a enclosure protection class: iP65
core tube diameter = 23 mm
designed for directional hydraulic valves with wet pin
dimensions
8
Wet Pin solenoids
coil
nG6
Part no. 449 00 X08 XX
aPPlication features
insulation class of coil: F (class H available on request) electrical connector acc. to din en 175301-803 a enclosure protection: iP65
coil for on/off solenoid with core tube diameter = 22mm
tecHnical data
449 00 X08 26 449 00 X08 27 449 00 X08 28 449 00 X08 29
Nominal Voltage From 12 to 205 V on request
9
2
Wet Pin solenoids
coil
nG6
Wet Pin ProPortional
solenoid-nG 6
Part no. c46 53 072 04
aPPlication
features
Push type
small hysteresis and quick response time mounting central thread m 19×1 emergency manual override
insulation class of coil: F (class H available on request) electrical connector acc. to din en 175301-803 a enclosure protection class: iP65
used on proportional valves for precise controlling direction, pressure and flow.
dimensions
tecHnical data
C46 53 072 04 Nominal Voltage 24 V Working Stroke 3.0 mm Total Stroke 7.0 mm Nominal Solenoid Force 59 N Nominal Force Hysteresis <6 N Nominal Current 0.8 A Nominal Resistance at 20°C 21.3 Ω ±5% Pressure Resistance (dyn.) 210 barthe curve shows an average without hysteresis. the tolerance range refers to averages without hysteresis.
force vs stroke curve
10
the curve shows the force at constant stroke of 1.5mm.
force vs current curve
Wet Pin solenoids
ProPortional solenoid
WitH lvdt nG6
Part no. c46 53 073 04 C46 53 073 04 Nominal Voltage 24 V Working Stroke 3.0 mm Total Stroke 7.0 mm Nominal Solenoid Force 59 mm Nominal Force Hysteresis <6 N Nominal Current 0.8 A Nominal Resistance at 20°C 21.3 Ω ±5% Pressure Resistance (dyn.) 210 baraPPlication
features
small hysteresis and quick response time
insulation class of coil: F (class H available on request)
electrical connector acc. to din en 175301-803 a + m12 clvdt enclosure protection class: iP65
used in electrical-hydraulic proportional close-loop systems. lvdt detects the position of armature, the deviation of positi-on of armature will be sent to proportipositi-onal amplifier and the position of armature and spool can be precisely controlled.
force vs stroke curve
tecHnical data of ProPortional solenoid
Supply Voltage 24 V ±20% Output Voltage linear Range 12 to 3 V Measurement Range ±3 mm Gain 1.5 V/mm ±3% Offset Range (typ.) ±1 mm Linearity (max.) ±1.5 Temperature Drift Gain 200 ppm/°C Working Temperature -10 to +100 °C
tecHnical data of lvdt
the curve shows the force at constant stroke of 1.5mm.
outPut voltaGe vs stroke curve
the curve shows an average without hysteresis. the tolerance range refers to averages without hysteresis.
force vs current curve
ProPortional solenoid
WitH lvdt nG6
dimensions
12
Wet Pin solenoids
Wet Pin ProPortional
square solenoid-nG6
Part no. c47 53 087 04 and c47 53 085 04Powered with nominal current
aPPlication
features
Push type
small hysteresis and quick response time emergency manual override
insulation class of coil: F (H available on request)
electrical connector: 2-pin with protection contact acc. to din en 175301-803 a
enclosure protection class: iP65
used on proportional valves for precise controlling direc-tion, pressure and flow.
force vs stroke curve
dimensions
tecHnical data
C47 53 087 04 C47 53 085 04 Nominal Voltage 24 V Working Stroke 2.8 mm Total Stroke 6.4 mm Nominal Solenoid Force 72 N Nominal Force Hysteresis <10 N Nominal Current 0.8 A Nominal Resistance at 20°C 20.3 Ω ±5% Pressure Resistance (dyn.) max. 250 bar Ambient Temperature -10 to +50 °C13
other voltages on request
Wet Pin solenoids
2
Wet Pin ProPortional
square solenoid-nG6
Wet Pin ProPortional
square solenoid-nG6
Part no. c47 53 084 70
dimensions
aPPlication
features
Push type
small hysteresis and quick response time emergency manual override
insulation class of coil: F (class H available on request) electrical connector acc. to din en 175301-803 a enclosure protection class: iP65
used on proportional valves for precise controlling direction, pressure and flow.
tecHnical data
C 47 53 084 70Nominal Voltage 9 V Working Stroke 3.0 mm Total Stroke 6.6 mm Nominal Solenoid Force 85.9 N Nominal Force Hysteresis <10 N Nominal Current 2.45 A Nominal Resistance at 20°C 2.88 Ω ±5% Pressure Resistance (dyn.) max. 250 bar Ambient Temperature -10 to +50 °C
Powered with nominal current
force vs stroke curve
14
other voltages on request
Wet Pin on/off dc
solenoid-nG10
Part no. c66 13 043 04
note: test current is 1.2a.
aPPlication features
Push type
small hysteresis and quick response time mounting central thread m 27x1.5 emergency manual override
insulation class of coil: F (class H available on request) electrical connector acc. to din en 175301-803 a enclosure protection class: iP65
core tube diameter = 31 mm
designed for directional hydraulic valves with wet pin
force vs stroke curve
dimensions
tecHnical data
15 C 66 13 043 04 Nominal Voltage 24 V Working Stroke 3.0 mm Total Stroke 7.0 mm Nominal Solenoid Force 59 N Nominal Force Hysteresis <6 N Nominal Current 0.8 A Nominal Resistance at 20°C 21.3 Ω ±5% Pressure Resistance (dyn.) 210 barWet Pin solenoids
2
Wet Pin on/off dc
solenoid-nG10
coil
nG10
Part no. 936 12 8XX XX
aPPlication features
insulation class of coil: F (class H available on request) electrical connector acc. to din en 175301-803 a enclosure protection: iP65
coil for on/off solenoid with core tube diameter = 31mm
936 128 11 00 936 128 77 00
Nominal Voltage 9 to 205 V on request
dimensions
tecHnical data
16
Wet Pin solenoids
Wet Pin ProPortional
solenoid-nG 10
Part no. c66 53 023 04 aPPlication features Push typesmall hysteresis and quick response time mounting central thread m 27×1.5
exchange of the coil without opening the hydraulic circuit emergency manual override
insulation class of coil: F (class H available on request) electrical connector acc. to din en 175301-803 a enclosure protection class: iP65
used on proportional valves for precise controlling direction, pressure and flow.
force vs stroke curve
dimensions
tecHnical data
C66 53 023 04 Nominal Voltage 24 V Working Stroke 4.0 mm Total Stroke 8.8 mm Nominal Solenoid Force See F-S curve Nominal Force Hysteresis <15 N Nominal Current 1.4 A Nominal Resistance at 20°C 13.4 Ω ±5% Pressure Resistance (dyn.) 210 barforce vs current curve
17
the curve shows an average without hysteresis. the tolerance range refers to averages without hysteresis.
Wet Pin solenoids
2
Wet Pin ProPortional
solenoid-nG 10
Wet Pin ProPortional
square solenoid nG 10
Part no. type 462 XXX
aPPlication
features
Push type version, small hysteresis and quick response timecoil insulation class H din en 175301-803a class of protection iP67 and iP6K9
different voltages, electrical interface and pressure resistances on demand
Wet-pin Proportional square solenoid nG 10 for control of position, pressure and flow.
tecHnical data
Type 462 XXXNominal Voltage 9 to 32 V Working Stroke 4.0 mm Total Stroke 8 to 9 mm Nominal Solenoid Force 50 N Nominal Force Hysteresis ±6% Nominal Current 2.0 A Nominal Resistance at 20°C 2.75 Ω ±5% Pressure Resistance 50 (max. 130) bar Ambient Temperature -10 to +50 °C Fluid Temperature (max.) 120 °C
dimensions
18
force vs stroke curve
ProPortional solenoid
WitH lvdt-nG 10
Part no. c 66 53 025 04 C66 53 025 04 Nominal Voltage 24 V Working Stroke 4.0 mm Total Stroke 8.8 mm Nominal Solenoid Force See F-S curve Nominal Force Hysteresis <15 N Nominal Current 1.4 A Nominal Resistance at 20°C 13.4 Ω ±5% Pressure Resistance (dyn.) 210 baraPPlication
features
small hysteresis and quick response time
insulation class of coil: F (class H available on request)
electrical connector acc. to din en 175301-803 a + m12 (lvdt) enclosure protection class: iP65
used in electrical-hydraulic proportional close-loop systems. lvdt detects the position of armature, the deviation of position of armature will be sent to proportional amplifier and the position of armature and spool can be precisely controlled.
voltaGe vs stroke curve
tecHnical data of ProPortional solenoid
C66 53 025 04
Supply Voltage 24 V ±20% Output Voltage linear Range 12 to 3 V Measurement Range ±4 mm
Gain 1.125 V/mm ±3% Offset Range (typ.) ±1 mm
Linearity (max.) ±1.5 % Temperature Drift Gain 200 ppm/°C Working Temperature -20 to +100 °C
tecHnical data of lvdt
19
note: test current is 1.2 a.
force vs stroke curve
force vs current curve
Wet Pin solenoids
2
ProPortional solenoid
WitH lvdt-nG 10
dimensions
20
Wet Pin solenoids
linear variable differ-
ential transformers
(lvdt)
aPPlication
features
excellent linearity and gain long service life
Withstand high pressure m12 connector
lvdt is widely used in test systems, weighing systems and hydraulic control systems, etc. lvdt can convert the linear motion of an object into a corresponding electrical signal. a complete control system can be realized by lvdt, control electronics and a proportional solenoid.
Part no. f00 11 269 04, f00 11 268 41
dimensions
21tecHnical data
distance sensoRs
3
current stroke curve – f00 11 268 41
voltaGe stroke curve – f00 11 269 04
F00 11 269 04 F00 11 268 41
Supply Voltage 24 V ±20% 15 V ±5% Output Current 2 to 10 mA 4 to 20 mA Output Load Impedance min. 10 KΩ 100 Ω Gain 0.25 V/mm ±3% 0.5 mA/mm Operating Stroke ±16 mm
Offset Range (typ.) ±1 mm Linearity (typ.) ± 7% F.S. Temperature Drift (typ.) 0.3 %/°C Ambient Temperature 0 to +85 °C Pressure Resistance (dyn.) 315 bar
Position sWitcH for
core tubes
Part no. f00 21 088 04
aPPlication
used to detect the position (0/1) of hydraulic valves to ensure safety operation.
features
small switching point hysteresis excellent Reproducibility High pressure endurance
Wide range of operating temperature m12 connector
F00 21 088 04
Supply Voltage Ub 24 V ±20% Output Voltage (min.) Ub-2.5 V Output Current (max.) 250 mA Switching Point Hysteresis (max.) 0.06 mm Reproducibility at 25 °C℃ ±0.02 mm Operating Temperature -20 to +85 °C Pressure Resistance (dyn.) max. 315 bar
tecHnical data
dimensions
cHaracteristic curve
22
distance sensoRs
c-frame
solenoid
4
dc solenoids
Part no. 118 XXXtecHnical data
dimensions
aPPlication featuresuse of cost-effective stamp-bent parts and molded parts for yoke and bobbin
Plunger bearing in plastic tube voltage from 6 v to 230 v dc
Push/pull variants, with and without return spring electrical interface by leads, connectors and pins class of protection iP00
small solenoids for different industrial applications. application samples:
automation industry: ticket stamper, coin- and Bill-, check- and sorting-machines
electrical switching units: actuators for power switches and circuit breakers
automotive: comfort solenoid for safety belt rollup
safety equipment: interlocking systems for doors and windows textile machinery: tread controllers, alterable switches
Dimensions 100 % ED 40 % ED 25 % ED 15 % ED 5 % ED
No. B (mm) H (mm) L (mm) D (mm) Stroke (mm) Force (N) Power (W) Force (N) Power (W) Force (N) Power (W) Force (N) Power (W) Force (N) Power (W)
115 14 15 20 5 5 0,05 2,3 0,1 5 0,2 8 0,3 12 1,0 37
116 16 19,5 24 7,3 5 0,2 3,2 0,6 8 0,8 11 1,2 19 3,2 60
118 18 20,5 32 8 6 0,3 4,2 0,7 10 1,1 16 1,8 26 5,3 82
107 18 21 37 7,1 7 0,3 4,6 0,6 11 0,9 18 1,4 29 3,8 84
d-frame
solenoid
dc solenoids
Part no. 128 XXXdimensions
aPPlication featuresuse of cost-effective stamp-bent parts and molded parts for yoke and bobbin
Plunger bearing in plastic tube voltage from 6 v to 230 v dc
Push/pull variants, with and without return spring electrical interface by leads, connectors and pins class of protection iP00
small solenoids for different industrial applications. application samples:
automation industry: ticket stamper, coin- and Bill-, check- and sorting-machines
electrical switching units: actuators for power switches and circuit breakers
automotive: comfort solenoid for safety belt rollup
safety equipment: interlocking systems for doors and windows textile machinery: tread controllers, alterable switches
tecHnical data
Dimensions 100 % ED 40 % ED 25 % ED 15 % ED 5 % ED
No. B (mm) H (mm) L (mm) D (mm) Stroke (mm) Force (N) Power (W) Force (N) Power (W) Force (N) Power (W) Force (N) Power (W) Force (N) Power (W)
113 13 11 45 5 6 0,1 4 0,3 9 0,4 14 1 19 1 54 197 24 30 30 10 6 0,5 5 1,1 12 1,7 19 3 32 10 109 131 24 27 42 9,3 10 0,3 6 0,8 15 1,2 23 2 36 5 102 130 24 29 40 9,3 10 0,4 6 0,8 13 1,3 20 2 30 6 105 142 30 32 40 9,4 10 0,4 7 1,3 16 1,9 24 3 40 9 117 133 26 32 59 12 12 1,4 10 3,2 23 4,9 36 8 60 20 169 136 36 38 44 15 10 2,2 10 4,8 21 6,5 34 12 54 32 185 137 36 38 52 15 15 1,2 11 2,5 24 4,1 40 6 63 17 185 138 36 38 64 15 20 1,0 11 2,5 28 3,5 45 6 70 14 193 148 41 48 47 16 15 2,0 12 4,5 27 7,0 43 11 66 26 184 150 49 50 100 15 30 2,5 22 5 45 8,5 75 12 104 31 417 24
PusH/Pull dc solenoid,
closed tYPe
aPPlication
solenoids for different industrial applications with high power demand - application samples: Big diesel engines: stop-actuator, controller for common Rail Pumps
textile industry machines membrane Pumps
dimensions
tecHnical data
Dimensions 100 % ED 40 % ED 25 % ED 15 % ED 5 % ED
No. D (mm) L (mm) Stroke (mm) Force (N) Power (W) Force (N) Power (W) Force (N) Power (W) Force (N) Power (W) Force (N) Power (W)
220 20 37 3 2 5 4 11 5 16 6 27 9,5 78,5 232 32 41 5 5 8 10 18 14 30 18 50 30 125 236 36 40 6 5 8 9 18 12 31 16 52 28 128 238 38 57 8 8 12 16 27 21 41 40 70 38 191 248 48 71 10 14 17 29 39 38 62 50 102 80 279 255 55 80 13 18 22 36 57 45 84 64 146 108 396 270 70 85 15 30 29 59 65 81 102 112 181 195 477 280 80 110 20 40 40 87 92 118 140 172 240 285 660 290 90 141 25 70 44 115 95 155 152 210 273 350 780 Part no. 2XX XXX features
High magnetic power
long life, maintenance free bearings voltage from 6 to 230 v dc
Push/pull variants, with and without return spring electrical interface by leads, connectors and pins class of protection from iP00 to iP65 possible
26
Pressure
sensor
Part no. type s400aPPlication
features
customizable pressure range from 0.1 to 40 bar for soldering, direct board or frame mounting
For relative or absolute pressure application
Pressure port contour and electrical pins upon customer requirement absolute version for direct embedding into molded housing designed for highest emc requirements
Pressure sensor used for gaseous media for integration into circuit boards in industrial applications
tecHnical data
S400Nominal Pressure 0.1 to 40 bar Pressure Application Relative or absolute Burst Pressure 3x nominal pressure Supply Voltage 5 V or 8 to 30 V Accuracy (-20 to 100°C) ≤ ±1.0% Operating Temperature -40 to +140°C Protection Class IP00
Electrical Solutions Soldering pins, flex strips, contact plugs or others
dc solenoids
5
PRessuRe sensoRs
Pressure
sensor
aPPlication
Pressure sensor for liquid or gaseous media in mobile applications and bayonet nut connector.
5
PRessuRe sensoRs
dimensions
Part no. type e3features
customized pressure range from 0.1 to 40 bar with individual pressure ports
For relative or absolute pressure applications and supply voltage 5 v or 8 to 30 volt
operation temperature up to 140°c possible Protection class iP67 or iP6K9K
Pressure port contour upon customer requirement
tecHniscHe daten
tecHnical data
Type E3Nominal Pressure 0.1 to 40 bar Pressure Application Relative or absolute Burst Pressure 3x nominal pressure Supply Voltage 5 V or 8 to 30 V Accuracy (-20 to 100°C) ≤ ±1,0% Operating Temperature -40 to +140°C
Electrical Connector Bayonet nut according DIN 72585 Pressure Port M10x1.5 to M16x1.5,
1/4 und 1/8 NPTF
PRessuRe sensoRs
2828individual
Products
HYdraulic, Pneumatic and mecHanical solenoids of all variations
Pneumatic and fluid Pressure sensors sPeed sensors (passive/inductive and active)
the products shown on the previous pages represent only a very small part of our product range. We are glad to develop individually designed and customized products according to your specifications. our portfolio for customer-specific products includes:
ETO MAGNETIC GmbH Hardtring 8 78333 Stockach GERMANY EKS Elektromagnetik GmbH Steinbeisstraße 50 71665 Vaihingen/Enz GERMANY ETO SENSORIC GmbH Löffelholzstraße 20 90441 Nürnberg GERMANY
ETO MAGNETIC CORP. 4311 Patterson S. E. Grand Rapids, MI 49512 USA
ETO MAGNETIC Sp. z o.o. ul. Eugeniusza Kwiatkowskiego 7 52-407 Wrocław
POLAND
ETO MAGNETIC TECHNOLOGIES (Kunshan) Co., Ltd.
Nr. 8, Guzheng Road 215300 Kunshan CHINA