Baumer Industrial Cameras
Innovative Vision Components for
Automated Image Processing
Content
Product Portfolio Industrial cameras 3
GigE Vision® Standard Intelligent solutions for GigE Vision® 4
GigE Vision®
TXG Cameras Compact GigE cameras 6
EXG Cameras Industrial GigE Vision® cameras with CMOS sensors 8
SXG Cameras Dual GigE cameras with Kodak sensors 9 HXG Cameras Dual GigE cameras with CMOS sensors 10 MXG Cameras Board Level cameras for a greater degree of freedom 11 Power over Ethernet PoE cameras and network components 12 Trigger Device GigE Vision® Trigger Device for precise camera control 13
IP67 Cameras GigE cameras with IP67 housing 14
FireWireTM IEEE1394
TXD and TXF Cameras Compact FireWireTM IEEE1394b cameras 15
CameraLink®
SXC Cameras CameraLink® cameras with Kodak sensors 16
HXC Cameras High Speed CMOS cameras 17
Industrial cameras from Baumer
Reliable components for demanding applications
Into the future with innovative technologies
Baumer is one of the leading global manufacturers of innovative image processing components and offers an extensive product range of high quality industrial cameras. Our clients profit from our many years of vision competence on an inter-national level and our strong development capacities. Our core competence lies in all vision disciplines – from sensors to signal processing, from interfaces to drivers, to integrate the camera into the corresponding vision system.
Product Portfolio
The Baumer Product Portfolio Compact industrial cameras with resolutions from VGA up to 8 megapixels
Gigabit Ethernet, CameraLink® and
FireWireTM
Innovative improvements like Power over Ethernet, Dual GigE, IP67 cameras and multiple I/Os
Our core values
We attach great importance to com-prehensive personal support for our customers and professional support in order to develop and realize innovative application solutions together.
More than just cameras – Versatility through innovation
Vision systems run many demanding applications these days. A camera design that allows fast and flexible integration is just as important for this as excellent image quality and high frame rates. The GigE Vision® cameras
from Baumer offer the optimal com-bination of all these characteristics. Besides using a suitable camera it is
Intelligent solutions for GigE Vision
®
Gigabit Ethernet enables many new applications
also important to select the optimum network components, because only a perfect combination guarantees reliable system operation. This is why camera manufacturer Baumer offers network components it has developed espe-cially to form a complete GigE Vision®
solution. The introduction of Gigabit Ethernet as a standard interface for
in-dustrial image processing allows many new applications. Multiple camera systems in particular can be decisively improved in this way with regard to security, reliability and structural flex-ibility. Because cameras from Baumer support the GenICam™ standard they can also be easily integrated into Third Party Software.
GigE Vision
®Standard
Simplified system design and cost reduction
Baumer introduced Power over Ethernet (PoE) as the first real single cable solution for GigE Vision® in
order to further simplify the system structure. With the PoE cameras, network components and the in-novative Trigger Device, Baumer offers the complete range of GigE components.
This combination of modern GigE Vision® cameras and hardware
components helps you to achieve greater system performance while simultaneously reducing installation and maintenance costs.
Compact GigE cameras
Convincing functionality
Comprehensive range of industrial cameras
Baumer offers many GigE Vision® cameras with resolutions of up to 5 megapixels
on the basis of modern CCD sensors in its TXG series. These cameras convince users with their excellent image quality and reliable industrial design. The integration of the cameras is simplified by the various mounting points in the camera housing. The cameras are fitted with one input and one output as standard. Additional models with up to 6 digital inputs and outputs are available for complex applications.
The powerful GigE interface
With a bandwidth of up to 120 MB/s and cable lengths of up to 100 m the GigE interface is the perfect solution for single and multiple camera systems, whereby cost-intensive frame grabbers can be replaced with standard Ethernet components.
Baumer GigE Starter Kit – Just unwrap and go...
It is easy to put cameras from Baumer into operation quickly with all necessary components by using the TXG Starter Kits. The included Baumer SDK contains all software tools to utilize the full performance of Baumer cameras.
Excellent image quality with 8 and 12 bit Resolutions from VGA up to 5 megapixels
Robust industrial design measuring 36 x 36 x 48 mm Advanced features including MultiCast, Trigger Delay, Timer, Debouncer and Sequencer
Models with up to 6 digital I/Os Starter Kit simplifies evaluation
TXG Cameras
Advanced camera features
Useful additional functions have been implemented in order to increase the user-friendliness of the TXG cameras. For example the Debouncer offers improved trigger stability, while functions such as the Sequencer or the Timer substantially increase flexibility of image acquisition and illumination. Thanks to MultiCast, images can be provided at different destinations for applications with several PCs.
EXG Cameras
Industrial GigE Vision
®
cameras with CMOS sensors
Entry level models for diverse requirements
Compact design to meet industrial requirements
Innovative and high-performance characteristics were combined with modern CMOS technology in the EXG camera series from Baumer. These models, with their attractive price/performance ratio and simultaneously high image quality, are a cost-efficient alternative to CCD cameras. High frame rates can be achieved through direct reading of the freely selectable Region of Interest (ROI). The extremely com-pact housing design of 36 x 36 x 42 mm also allows simple integration into even the most confined spaces.
Resolutions of VGA and 5 megapixels High frame rates in ROI mode Attractive price/performance ratio Excellent 12 bit signal processing Compact housing design
SXG Cameras
Dual GigE cameras with Kodak sensors
Amazing performance at 240 MB/s
Speed and resolution without compromises
240 MB/s – the double GigE bandwidth – can be achieved with the innova-tion of the Dual GigE interface on the SXG camera. Based on the modern Kodak sensors with Quad Tap technol-ogy, these cameras win users over with their excellent image quality and
simultaneous high frame rate. In order to guarantee the necessary bandwidth two GigE connections are linked to a Link Aggregation Group (LAG). The integrated PoE technology also removes the need for a separate power supply cable. In addition the further innovative
Doubles standard bandwidth at 240 MB/s Integrated Power over Ethernet technology Full 12 bit images at 1, 2, 4 and 8 megapixels Frame rates up to 120 fps
Flexible configurations with 6 digital I/O ports Specifically designed Starter Kit is available
Baumer SXG Starter Kit - Just unwrap and go...
The Starter Kit enables simple assessment of the SXG cameras. The complete package includes cables, the Baumer SDK and a Gigabit Ethernet PCI express card with 2 GigE connections. These connections have Power over Ethernet, removing
features such as the Sequencer, Trigger Delay and Debouncer also simplify the use of the cameras in highly diverse applications.
HXG Cameras
Dual GigE and CMOS sensors combined for the first time
The fastest GigE cameras on the market
Precision at top speed
The innovative Dual GigE interface from Baumer offers an efficient solution to integrate cameras with fast sensors and high frame rates into a Gigabit Ethernet network. The latest CMOS sensors and Dual GigE interface technology are combined for the first time in the new HXG series. Up to 109 frames/s can be transmitted with resolutions of 2 and 4 megapixels. These high-resolution ca-meras also offer excellent image quality at high speeds.
The full performance of the powerful CMOS sensors can be utilized with the
MXG Cameras
Board Level cameras for a greater degree of freedom
The solution for small, cramped installation spaces
A lot of technology for a small space
The integrated Trigger Delay guarantees simplified synchronization between application and camera while the Sequencer substantially simplifies the acquisition of image series with changing acquisition parameters. Both Packet Delay and Trans-mission Delay processes are also available for reliable data transTrans-mission when operating multiple cameras. Loadable and storable user sets simplify camera integration, and the GigE standard interface can be used to reduce integration and mainte-nance costs.
Flexible integration in almost any mechanical structure
Latest CCD and CMOS sensors Resolutions from VGA up to 4 megapixels
Supports Power over Ethernet
Limitless flexibility
Standard cameras reach their limits in applications in which each millimeter of space counts and a high degree of flexibility is required. The Board Level camera series MXG from Baumer offers the solution for applications that require highly flexible components. The
remote sensor circuit board is hardly lar-ger than a 2-Euro piece at 28 x 28 mm and is connected to the system circuit board via a flexprint. The cameras can thus be adjusted individually to their environmental conditions.
PoE cameras and network components
Competence from a single source
PoE network components for industrial use
The PoE cameras achieve the best possible results when used with the network components from Baumer such as the GigE Power Switch and GigE Power Injec-tor. These products were developed in accordance with industrial standards for an operating voltage of 48 volt and allow easy mounting on DIN hat rails.
Simplify your installation with Power over Ethernet
In the PoE cameras Baumer presents a camera series that was specially developed as a cost-effective single cable solution for Gigabit Ethernet. These cameras allow you to simplify the mechanical structure, reduce installation and maintenance costs and increase the reliability of the vision system. These advantages, combined with cable lengths of up to 100 m, enable new and interesting approaches to the solu-tion of industrial vision applicasolu-tions.
GigE Trigger Device
Precise camera control over the network
Simplified process integration and Track & Trace
The GigE Trigger Device from Baumer enables the simple integration of process-relevant sensors and actuators into the camera network. With nu-merous inputs and outputs it offers sufficient connections to integrate light barriers or encoders and to thus realize innovative camera control. The input signals from the sensors are evaluated
by the Trigger Device and used for real-time capable triggering of one or several cameras via the network. Based on the image analysis on the PC the Trigger Device is capable of switching the digital outputs that can be used to e.g. control double door systems. The integrated Track & Trace function also allows reliable tracing of multiple
Real-time triggering of GigE Vision® cameras over the network
Simplifies integration of sensors and encoders Track & Trace: Reliable tracing of multiple objects Supports Power over Ethernet
Graphical configuration tool for easy set-up
Trigger Device
objects within the process. The con-figuration and control of all functions is carried out conveniently via a graphic configuration tool.
IP67 Cameras
GigE cameras with IP67 housings
Designed to perform in harsh industrial environments
GigE cameras with waterproof and dustproof housings
In order to also fulfill the requirements of harsh industrial environments Baumer also offers cameras in an IP67 protective housing that is waterproof and dustproof in accordance with this protection type. The housing protects the camera with the sensor and all the electronics. The integrated C-Mount connection means that all standard lenses are also securely enclosed without a separate protective housing becoming necessary. An M12 plug rounds off the industrial design and enables a secure connection between the camera and the interface. The IP67 cameras are available with a GigE interface and resolutions up to 5 megapixels.
Waterproof and dustproof
Assorted tube lengths to fit various standard lenses Resolutions from VGA up to 5 megapixels
TXD and TXF Cameras
Compact FireWire
TM
IEEE1394b cameras
Simple Integration for Your Application
Data transfer rates up to 800 Mbit/s
With the TXD and TXF series Baumer is offering two camera lines with FireWireTM
interfaces. These cameras use the IEEE1394b standard and convince users with their high data transfer rates of up to 800 Mbit/s. The downward compatibility of the cameras also supports the older IEEE1394a standard.
TXF Series – Baumer FCAM, a step ahead of DCAM
With its TXF series Baumer has opti-mized the FireWireTM cameras
specifi-cally for use in industrial systems. The cameras with the FCAM driver rely on protocol based and asynchronous data transfer and thus profit from both great-er system security and maximum use of the bus bandwidth up to 80 MB/s.
TXD Series – DCAM compliance simplifies integration
The TXD series uses the standardized DCAM (IIDC V1.31) protocol for data transfer and thus enables simple inte-gration of the camera, whether via the generic programming interface Baumer-GAPI or other image processing software that supports this standard.
Outputs excellent 8 and 12 bit images Resolutions from VGA up to 5 megapixels RGB and YUV interpolation algorithms on board Compact housing design, light weight FireWireTM IEEE1394b and IEEE1394a compliant
SXC Cameras
Comprehensive functionality in a compact design
The SX camera platform was developed in order to support high resolution at high frame rates. The high performance Kodak CCD technology was integrated for this purpose. The SXC series uses Quad Tap sensors with 1 to 8 megapix-els for excellent image quality at the highest frame rates. Based on the CameraLink® interface, the cameras
CameraLink
®
cameras with Kodak sensors
Excellent image quality at high frame rates
Resolutions up to 8 megapixels Frame rates up to 120 fps Flexibility with 6 digital I/Os Compact housing design measuring
offer high data transfer rates com-bined with minimal CPU load. Their wide range of functionality, flexible I/O interfaces and a robust housing design make these cameras the ideal solution for many different applications.
HXC Cameras
The right cameras for demanding industrial applications
The highest frame rates combined with resolutions of up to 4 megapixels make the innovative HXC cameras with CMOS sensors the perfect solution for extremely fast image processing applications. Many models with the CameraLink® interface that
begin at 1,3 megapixels and 180 frames/s also convince users running the fastest application with its top class image quality. The use of different Regions of Interest (ROI) within a full frame also makes it possible to increase image repetition rates to up to 120,000 frames/s.
.
High speed CMOS cameras
Capturing fast processes
Resolutions up to 4 megapixels Outstanding frame rates up to 500 fps Configuration tool simplifies software integration
Easy camera evaluation
Intelligent Software and extensive accessories
Baumer-GAPI SDK
The Baumer-GAPI is a generic applica-tion programming interface (API) and is distinguished by its high degree of stability and power. Simply put, it is easy to integrate any Baumer camera into your software environment. It sup-ports the Windows and Linux (32/64
bit) operating systems with various programming languages (C, C++, C# for .NETTM). Cameras with different
hardware interfaces (Gigabit Ethernet, CameraLink®, FireWireTM) can be
oper-ated uniformly and at the same time with one PC system.
Baumer also supports the following third party software products
and many other suppliers
Machine Vision
Our GigE cameras are the perfect solu-tion for multi-camera systems used in quality inspection, automation and process optimization.
Pharmaceutical Inspection
Excellent image quality guarantees that critical components in pharmaceutical applications are reliably inspected.
Food & Beverage
Track & Trace provided by our GigE Trig-ger Device enables a reliable tracking of objects during the manufacturing process.
Baumer cameras in use
Versatile designs support many applications
Thanks to their versatility and flexibility, Baumer‘s GigE Vision® components are the
right solution for a wide variety of applications, especially when quality, security and productivity are critical. One of our core markets is machine vision used for industrial inspection. Throughout the world, thousands of our products are in use by OEM and system integrators and provide our customers with decisive competi-tive advantages.
Baumer is continuously developing new products that meet the needs of our customers and setting benchmarks with innovation and creativity. This allows us to provide completely new solutions in industrial, medical and scientific imaging applications. Applications ■ Robotics ■ Quality Control ■ Factory Automation ■ Process Automation ■ Traffic Monitoring ■ Packaging Inspection ■ Print Inspection ■ Medical Engineering ■ Solar Industry
Photo: Seidenader Maschinenbau GmbH
Sales Offices
Baumer Germany Baumer GmbH
Pfingstweide 28 · DE-61169 Friedberg
Phone +49 (0)60 31 60 07 0 · Fax +49 (0)60 31 60 07 70 [email protected] Baumer Switzerland Baumer Electric AG Hummelstrasse 17 · CH-8501 Frauenfeld Phone +41 (0)52 728 11 22 · Fax +41 (0)52 728 11 44 [email protected] Baumer Italy Baumer Italia S.r.l.
Via Resistenza · IT-20090 Assago, MI
Phone +39 (0)245 706 065 · Fax +39 (0)245 706 211 [email protected]
Baumer United Kingdom Baumer Ltd.
33/36 Shrivenham Hundred · GB-Watchfield, Swindon, SN6 8TZ Phone +44 (0)1793 783 839 · Fax +44 (0)1793 783 814 [email protected]
Baumer USA Baumer Ltd.
122 Spring Street Unit C-6 · US-CT 06489 Southington Phone +1 800 937 9336 · Fax +1 860 628 6280 [email protected]
Baumer China Baumer (China) Co., Ltd.
Building 30 · 2nd Floor · Section A · Minyi Road 201 · Songjiang district · CN-201612 Shanghai Phone +86 (0)21 6768 7095 · Fax +86 (0)21 6768 7098
Inspired?
anteed.
