• No results found

Welding of AA 6028 Aluminum Alloy and Its Nanocomposite Using Different Filler Materials

N/A
N/A
Protected

Academic year: 2020

Share "Welding of AA 6028 Aluminum Alloy and Its Nanocomposite Using Different Filler Materials"

Copied!
7
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Fig. 1SEM micrographs of the AA6028 alloy (a) and its nanocomposite (AA6028 alloy/2 mass% Al2O3) (b) base metals.
Fig. 4Optical macro-view (a), and micro-views (b)­(e) of the AA 6028base metal joints welded with filler metal produced by treating Al-6%Sialloy with 1 mass% Al-Ti5-B1 master alloy where; (b) and (c) weld/basemetal interface, and (d) and (e) weld metal.
Fig. 5SEM micrographs for the weld zone of the AA 6028 base metal welded with filler metal produced by treating Al-6%Si alloy with1 mass% Al-Ti5-B1 master alloy with (a) normal and (b) higher magnification.
Fig. 7SEM micrographs for the weld zone of the AA 6028 base metal welded with filler metal produced by treating Al-6%Si alloy with3 mass% Al-Ti5-B1 master alloy with (a) normal and (b) higher magnification.
+3

References

Related documents