• No results found

Design and fabrication of a hydroformed absorber for an evacuated flat plate solar collector

N/A
N/A
Protected

Academic year: 2020

Share "Design and fabrication of a hydroformed absorber for an evacuated flat plate solar collector"

Copied!
10
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Fig. 1. (a) Mould and clamp plate for initialhydroforming trials, showing recesses of variousdepths and O-ring groove
Fig. 2. Hydroformed and laser cut sheets prior to welding.
Table 1Assumed parameters and collector e
Fig. 5. Cross-section of toroidal profiles as modelled in Abaqus. The mould line for toroid (ii) is included here simply to illustrate how the shape is generated: theAbaqus simulations described below are for a free (unenclosed) panel.
+3

References

Related documents

We studied the influence of the type of anchor and the definition of improvement on the estimates of the SDC and the MIC of the NDI in a sample of patients with general,

administrator of that facility for the next two years. She began teaching at Lewis-Clark State College in Lewiston in 2004, continuing through the time of Rosamond’s death. Just

French regulatory prevention information throughout the town include the Territorial Coherence Scheme (SCoT), Knowledge of Existing Data (PAC), Flood Risk Prevention Plan

V tem poglavju sem z analizo dolgov v zaključnih računih na primeru pomurskih občin iz bilance prihodkov in odhodkov, računa finančnih terjatev in naložb ter računov

The crude extract and the fraction exhibiting the lowest IC50value were also tested for AR inhibitory activity using kidney enzyme solution of diabetic mice in order

A cyber-physical system (CPS) based framework is proposed for co-design optimization of the physical plant parameters and controller variables for an electric powertrain, in view

A: CSN does not currently have a ticketing system. Successful proposer is required to provide a record of service requests and to track and monitor requests for financial aid