VMware vRealize End
Point Operations for
Microsoft Exchange
Server 1.0
You can find the most up-to-date technical documentation on the VMware website at: https://docs.vmware.com/
If you have comments about this documentation, submit your feedback to docfeedback@vmware.com
Copyright © 2019 VMware, Inc. All rights reserved. Copyright and trademark information. VMware, Inc.
3401 Hillview Ave. Palo Alto, CA 94304 www.vmware.com
VMware vRealize End Point Operations for Microsoft Exchange Server 5
1
Introduction to
VMware vRealize End Point Operations for Microsoft Exchange Server 6
2
Installing the
VMware vRealize End Point Operations for Microsoft Exchange Server 8
Install the VMware vRealize End Point Operations for Microsoft Exchange Server 8 Minimum Privileges to Monitor theVMware vRealize End Point Operations for Microsoft Exchange Server Plug-in 9
3
Metrics 10
Exchange Server Metrics 11
Exchange ADAccess Domain Controller Service Metrics 11 Exchange Active Directory Topology Service Metrics 12 Exchange Anti-spam Update Service Metrics 13 Exchange Availability Service 16
Exchange Database Instance Service Metrics 18 Exchange Database Service Metrics 21
Exchange Diagnostics Service Metrics 23 Exchange EdgeSync service Metrics 24
Exchange Frontend Transport Service Metrics 25 Exchange Health Manager Service Metrics 28 Exchange IMAP4 Backend Service Metrics 29 Exchange IMAP4 Service Metrics 36
Exchange Information Store Service Metrics 42 Exchange Mailbox Assistants Service Metrics 53 Exchange Mailbox Replication Service Metrics 54
Exchange Mailbox Transport Submission Service Metrics 58 Exchange Monitoring Service Metrics 59
Exchange OWA Service Metrics 60
Exchange POP3 Backend Service Metrics 65 Exchange POP3 Service Metrics 68
Exchange RPC Client Access Service Metrics 71 Exchange Replication Service Metrics 74 Exchange Search Service Metrics 77 Exchange Service Host Service Metrics 80 Exchange Throttling Service Metrics 80
Exchange Transport Log Search Service Metrics 81 Exchange Transport Service Metrics 82
Exchange Unified Messaging Call Router Service Metrics 94 Exchange Unified Messaging Service Metrics 95
for Microsoft Exchange Server
The documentation for the VMware vRealize End Point Operations for Microsoft Exchange Server for
End Point Operations Management includes information about the installation and metrics available for
the plug-in contained in the VMware vRealize End Point Operations for Microsoft Exchange Server.
The documentation for the VMware vRealize End Point Operations for Microsoft Exchange Server
describes the process of deploying a working instance of the
VMware vRealize End Point Operations for Microsoft Exchange Server for
End Point Operations Management in your vRealize Operations Manager environment.
Intended Audience
The information in this guide is intended for operations personnel who set up and support the vRealize
Operations Manager infrastructure.
VMware Technical Publications Glossary
VMware Technical Publications provides a glossary of terms that might be unfamiliar to you. For
definitions of terms as they are used in VMware technical documentation, go to
VMware vRealize End Point
Operations for Microsoft
Exchange Server
1
This VMware vRealize End Point Operations for Microsoft Exchange Server plug-in is deployed to the
End Point Operations Management agent that helps to monitor MS Exchange server.
The VMware vRealize End Point Operations for Microsoft Exchange Server plug-in discovers and collects
metrics for the following objects:
n
Exchange server
n
Exchange ADAccess Domain Controller service
nExchange Active Directory Topology service
nExchange Anti-spam Update service
nExchange Availability Service service
nExchange Database Instance service
nExchange Database service
n
Exchange Diagnostics service
nExchange EdgeSync service
n
Exchange Frontend Transport service
nExchange Health Manager service
nExchange IMAP4 Backend service
nExchange IMAP4 service
n
Exchange Information Store service
nExchange Mailbox Assistants service
nExchange Mailbox Replication service
nExchange Mailbox Transport Delivery service
nExchange Mailbox Transport Submission service
nExchange Monitoring service
n
Exchange OWA service
n
Exchange POP3 service
n
Exchange RPC Client Access service
nExchange Replication service
n
Exchange Search service
nExchange Service Host service
nExchange Throttling service
n
Exchange Transport Log Search service
nExchange Transport service
n
Exchange Unified Messaging Call Router service
nExchange Unified Messaging service
VMware vRealize End Point
Operations for Microsoft
Exchange Server
2
You can download the VMware vRealize End Point Operations for Microsoft Exchange Server from the
VMware Solution Exchange website.
This chapter includes the following topics:
n
Install the VMware vRealize End Point Operations for Microsoft Exchange Server
n
Minimum Privileges to Monitor the VMware vRealize End Point Operations for Microsoft Exchange
Server Plug-in
Install the
VMware vRealize End Point Operations for Microsoft
Exchange Server
The VMware vRealize End Point Operations for Microsoft Exchange Server consists of a PAK file. You
can install the VMware vRealize End Point Operations for Microsoft Exchange Server to monitor the
objects of the VMware vRealize End Point Operations for Microsoft Exchange Server server and collect
metrics.
Prerequisites
Verify that the cluster.exe command line interface tool is enabled on the monitored machine.
Procedure
1
Log in to the vRealize Operations Manager user interface with administrative privileges.
2
In the left pane of vRealize Operations Manager, click the Administration icon and click Solutions.
3
On the Solutions tab, click the plus sign.
4
Browse to locate the temporary folder and select the PAK file.
5
Click Upload.
The upload might take several minutes.
6
Read and accept the EULA, and click Next.
7
When the VMware vRealize End Point Operations for Microsoft Exchange Server is installed, click
Finish.
What to do next
After you install the VMware vRealize End Point Operations for Microsoft Exchange Server, the End Point
Operations Management agent discovers and monitors the objects of the
VMware vRealize End Point Operations for Microsoft Exchange Server.
Minimum Privileges to Monitor the
VMware vRealize End Point Operations for Microsoft
Exchange Server Plug-in
Ensure that the user the agent runs with after installation has sufficient privileges.
n
If the Exchange server runs in a domain, the user should be a part of that domain.
nThe user must have read access to all databases including system databases.
nThe user must be a local administrator.
Metrics
3
You can monitor metrics that VMware vRealize End Point Operations for Microsoft Exchange Server
collects for various objects.
This chapter includes the following topics:
n
Exchange Server Metrics
n
Exchange ADAccess Domain Controller Service Metrics
nExchange Active Directory Topology Service Metrics
nExchange Anti-spam Update Service Metrics
nExchange Availability Service
n
Exchange Database Instance Service Metrics
nExchange Database Service Metrics
n
Exchange Diagnostics Service Metrics
nExchange EdgeSync service Metrics
n
Exchange Frontend Transport Service Metrics
nExchange Health Manager Service Metrics
nExchange IMAP4 Backend Service Metrics
nExchange IMAP4 Service Metrics
n
Exchange Information Store Service Metrics
nExchange Mailbox Assistants Service Metrics
nExchange Mailbox Replication Service Metrics
n
Exchange Mailbox Transport Submission Service Metrics
nExchange Monitoring Service Metrics
n
Exchange OWA Service Metrics
n
Exchange POP3 Backend Service Metrics
nExchange POP3 Service Metrics
n
Exchange RPC Client Access Service Metrics
nExchange Replication Service Metrics
n
Exchange Search Service Metrics
nExchange Service Host Service Metrics
nExchange Throttling Service Metrics
n
Exchange Transport Log Search Service Metrics
nExchange Transport Service Metrics
n
Exchange Unified Messaging Call Router Service Metrics
nExchange Unified Messaging Service Metrics
Exchange Server Metrics
The VMware vRealize End Point Operations for Microsoft Exchange Server collects Exchange Server
metrics.
Table 3
‑1. Exchange Server Metrics
Name Alias Units Category Default On
Default Interval in minutes
Availability Availability percentage AVAILABILITY true 5
Exchange ADAccess Domain Controller Service Metrics
The VMware vRealize End Point Operations for Microsoft Exchange Server collects Exchange ADAccess
Domain Controller service metrics.
Table 3
‑2. Exchange ADAccess Domain Controller service Metrics
Name Alias Units Category
Defa ult On
Default Interval in minutes
LDAP Search Time LDAPSearchTime none UTILIZATION true 5
LDAP Searches Time Limit Exceeded per Minute
LDAPSearchesTimeLimit ExceededperMinute
none UTILIZATION false 5
Reachability Bitmask ReachabilityBitmask none UTILIZATION false 5
PDC Flag PDCFlag none UTILIZATION false 5
LDAP Connection Lifetime LDAPConnectionLifetime none UTILIZATION false 5
LDAP VLV Requests/sec LDAPVLVRequests/sec none UTILIZATION false 5
Kerberos Ticket Lifetime KerberosTicketLifetime none UTILIZATION false 5
OS Version Flag OSVersionFlag none UTILIZATION false 5
LDAP Disconnects per Minute LDAPDisconnectsperMin ute
Table 3
‑2. Exchange ADAccess Domain Controller service Metrics (Continued)
Name Alias Units Category
Defa ult On
Default Interval in minutes
IsSynchronized Flag IsSynchronizedFlag none UTILIZATION false 5
GetHostByName Elapsed Time GetHostByNameElapsed Time
none UTILIZATION false 5
SACL Right Flag SACLRightFlag none UTILIZATION false 5
LDAP Searches Timed Out per Minute LDAPSearchesTimedOut perMinute
none UTILIZATION true 5
Local Site Flag LocalSiteFlag none UTILIZATION false 5
LDAP Modification Error per Minute LDAPModificationErrorpe rMinute
none UTILIZATION false 5
Availability Availability percentage AVAILABILIT
Y
true 10
User Searches Failed per Minute UserSearchesFailedperM inute
none UTILIZATION false 5
Number of Outstanding Requests NumberofOutstandingRe quests
none UTILIZATION false 5
DsGetDcName Elapsed Time DsGetDcNameElapsedTi
me
none UTILIZATION false 5
LDAP Fatal Errors per Minute LDAPFatalErrorsperMinu te
none UTILIZATION false 5
LDAP Read Time LDAPReadTime none UTILIZATION false 5
GC Capable Flag GCCapableFlag none UTILIZATION false 5
Critical Data Flag CriticalDataFlag none UTILIZATION false 5
LDAP Search Calls/sec LDAPSearchCalls/sec none UTILIZATION false 5
LDAP Pages/sec LDAPPages/sec none UTILIZATION false 5
Long Running LDAP Operations/min LongRunningLDAPOpera tions/min
none UTILIZATION true 5
Netlogon Flag NetlogonFlag none UTILIZATION false 5
Bind Failures per Minute BindFailuresperMinute none UTILIZATION false 5
LDAP Read Calls/sec LDAPReadCalls/sec none UTILIZATION false 5
Exchange Active Directory Topology Service Metrics
The VMware vRealize End Point Operations for Microsoft Exchange Server collects Exchange Active
Directory Topology service metrics.
Table 3
‑3. Exchange Active Directory Topology service Metrics
Name Alias Units Category
Defa ult On
Default Interval in minutes
Availability Availability percentage AVAILABILIT
Y
true 10
Threads Threads none UTILIZATION false 5
Resident Memory Size ResidentMemSize B UTILIZATION true 5
Memory Size MemSize B UTILIZATION false 5
Cpu Total Time TotalTime ms UTILIZATION false 10
Cpu Total Time per Minute TotalTime1m ms UTILIZATION false 10
Cpu User Time UserTime ms UTILIZATION false 10
Cpu User Time per Minute UserTime1m ms UTILIZATION false 10
Cpu System Time SystemTime ms UTILIZATION false 10
Cpu System Time per Minute SystemTime1m ms UTILIZATION false 10
Start Time StartTime epoch-millis AVAILABILIT
Y
true 10
Cpu Usage Usage percentage UTILIZATION true 5
Open Handles OpenHandles none UTILIZATION false 5
Start Type StartType none AVAILABILIT
Y
false 10
Exchange Anti-spam Update Service Metrics
The VMware vRealize End Point Operations for Microsoft Exchange Server collects Exchange Anti-spam
Update service metrics.
Table 3
‑4. Exchange Anti-spam Update Service Metrics
Name Alias Units Category
Defa ult On
Default Interval in minutes
Scan Processes Running ScanProcessesRunning none UTILIZATION false 5
Scan Requests Rejected/sec ScanRequestsRejected/s ec
none UTILIZATION false 5
Scan Requests Submitted ScanRequestsSubmitted none UTILIZATION false 5
Scan Time Median ScanTimeMedian none UTILIZATION false 5
Scan Processes Below Configured Minimum
ScanProcessesBelowCo nfiguredMinimum
none UTILIZATION false 5
Classification - Items Processed Items Processed none UTILIZATION false 5
Table 3
‑4. Exchange Anti-spam Update Service Metrics (Continued)
Name Alias Units Category
Defa ult On
Default Interval in minutes
Start Time StartTime epoch-millis AVAILABILIT
Y
false 10
Scan Requests Bytes Scanned/sec ScanRequestsBytesScan ned/sec
none UTILIZATION false 5
Antimalware - Microsoft - Failed Scans Failed Scans none UTILIZATION false 5
Engine - Microsoft - Updates Attempted Updates Attempted none UTILIZATION false 5 Antimalware - Microsoft - Scan
Time/item
Failed Scans none UTILIZATION false 5
Scan Detection ScanDetection none UTILIZATION false 5
Scan Detection Rate ScanDetectionRate none UTILIZATION false 5
Engine - Microsoft - Total Failed Updates
Total Failed Updates none UTILIZATION false 5
Antimalware Processing Time/req AntimalwareProcessingTi me/req
none UTILIZATION false 5
Scan Requests Retried ScanRequestsRetried none UTILIZATION false 5
Open Handles OpenHandles none UTILIZATION true 5
Availability Availability percentage AVAILABILIT
Y
true 10
Classification - Engine Errors Engine Errors none UTILIZATION true 5
Scan Requests Processed ScanRequestsProcessed none UTILIZATION true 5
Scan Requests Rejected ScanRequestsRejected none UTILIZATION false 5
Scan Requests Fatal Errors ScanRequestsFatalError s
none UTILIZATION false 5
Scan Time in 95th Percentile ScanTimein95thPercentil e
none UTILIZATION false 5
Antimalware - Microsoft - Items Processed/sec
Items Processed/sec none UTILIZATION false 5
Scan Requests Outstanding ScanRequestsOutstandin g
none UTILIZATION false 5
Total Scan Requests Processed TotalScanRequestsProce ssed
none UTILIZATION false 5
Antimalware - Microsoft - Bytes Scanned/ms
Bytes Scanned/ms none UTILIZATION false 5
Scan Request Errors ScanRequestErrors none UTILIZATION false 5
Resident Memory Size ResidentMemSize B UTILIZATION false 5
Table 3
‑4. Exchange Anti-spam Update Service Metrics (Continued)
Name Alias Units Category
Defa ult On
Default Interval in minutes
Engine - Microsoft - No Updates Available
No Updates Available ? none UTILIZATION false 5
Cpu User Time UserTime ms UTILIZATION false 10
Cpu User Time per Minute UserTime1m ms UTILIZATION false 5
Scan Requests Being Scanned ScanRequestsBeingScan ned
none UTILIZATION false 5
Antimalware - Microsoft - Items Processed
Items Processed none UTILIZATION false 5
Scan Time in 90th Percentile ScanTimein90thPercentil e
none UTILIZATION false 5
Classification - Engine Load Time/load Engine Load Time/load none UTILIZATION false 5 Antimalware - Microsoft - Successful
Scans
Successful Scans none UTILIZATION false 5
Classification - Failed Scans Failed Scans none UTILIZATION false 5
Classification - Successful Scans Successful Scans none UTILIZATION false 5
Engine - Microsoft - Consecutive Failed Updates
Consecutive Failed Updates
none UTILIZATION false 5
Classification - Bytes Classified/ms Bytes Classified/ms none UTILIZATION false 5 Classification Processing Time/req ClassificationProcessing
Time/req
none UTILIZATION false 5
Scan Requests Processed/sec ScanRequestsProcesse d/sec
none UTILIZATION false 5
Classification - Scan Time/item Scan Time/item none UTILIZATION false 5
Engine - Microsoft - Updates Successful
Updates Successful none UTILIZATION false 5
Cpu Usage Usage percentage UTILIZATION false 5
Unhealthy Antimalware engines UnhealthyAntimalwareen gines
none UTILIZATION false 5
Classification - Items with Classification Detections
Items with Classification Detections
none UTILIZATION false 5
Scan Error Rate ScanErrorRate none UTILIZATION false 5
Scan Requests Processing Time/req ScanRequestsProcessin gTime/req
none UTILIZATION false 5
Scan Requests Submitted/sec ScanRequestsSubmitte d/sec
none UTILIZATION false 5
Scan Errors ScanErrors none UTILIZATION false 5
Antimalware - Microsoft - Engine Load Time/load
Table 3
‑4. Exchange Anti-spam Update Service Metrics (Continued)
Name Alias Units Category
Defa ult On
Default Interval in minutes
Scan Request Error Ratio ScanRequestErrorRatio none UTILIZATION false 5
Antimalware - Microsoft - Engine Errors Engine Errors none UTILIZATION false 5
Scan Requests Queued ScanRequestsQueued none UTILIZATION false 5
Scan Time in 99th Percentile ScanTimein99thPercentil e
none UTILIZATION false 5
Cpu Total Time TotalTime ms UTILIZATION false 5
Cpu Total Time per Minute TotalTime1m ms UTILIZATION false 5
Antimalware - Microsoft - Items with Malware Detections
Items with Malware Detections
none UTILIZATION false 5
Cpu System Time SystemTime ms UTILIZATION false 10
Cpu System Time per Minute SystemTime1m ms UTILIZATION false 10
Scan Request Wait Time/req ScanRequestWaitTime/re q
none UTILIZATION false 5
Classification - Items Processed/sec Items Processed/sec none UTILIZATION false 5
Threads Threads none UTILIZATION false 5
Scan Requests Bytes/req ScanRequestsBytes/req none UTILIZATION false 5
Scan Request Timeouts ScanRequestTimeouts none UTILIZATION false 5
Scan Time/req ScanTime/req none UTILIZATION false 5
Average Scan Time AverageScanTime none UTILIZATION false 5
Scan Processes Restarted ScanProcessesRestarted none UTILIZATION false 5
Start Type StartType none AVAILABILIT
Y
false 10
Exchange Availability Service
The VMware vRealize End Point Operations for Microsoft Exchange Server collects Exchange Availability
Service metrics.
Table 3
‑5. Exchange Availability Service Metrics
Name Alias Units Category
Default On
Default Interval in minutes
Public Folder Queries (sec) PublicFolderQueries(sec) none UTILIZATIO N
false 5
Foreign Connector Queries (sec) ForeignConnectorQueries(sec) none UTILIZATIO N
false 5
Average Time to Map External Caller to Internal Identity
AverageTimetoMapExternalCallert oInternalIdentity
none UTILIZATIO
N
Table 3
‑5. Exchange Availability Service Metrics (Continued)
Name Alias Units Category
Default On
Default Interval in minutes
Average Number of Mailboxes Processed per Request
AverageTimetoMapExternalCallert oInternalIdentity
none UTILIZATIO
N
false 5
Federated Free Busy Failures (sec)
FederatedFreeBusyFailures(sec) none UTILIZATIO N
false 5
Suggestions Requests (sec) SuggestionsRequests(sec) none UTILIZATIO
N
false 5
Successful Client-Reported Requests - Less than 5 seconds
SuccessfulClient- ReportedRequests-Lessthan5seconds none UTILIZATIO N false 5
Availability Requests (sec) AvailabilityRequests(sec) none UTILIZATIO N false 5 Successful Client-Reported Requests - Total SuccessfulClient-ReportedRequests-Total none UTILIZATIO N false 5
Average Time to Process a Cross-Site Free Busy Request
AverageTimetoProcessaCross-SiteFreeBusyRequest
none UTILIZATIO
N
false 5
Cross-Forest Calendar Failures (sec) Cross-ForestCalendarFailures(sec) none UTILIZATIO N false 5
Intra-Site Proxy Free Busy Failures (sec) Intra-SiteProxyFreeBusyFailures(sec) none UTILIZATIO N false 5
Average Time to Process a Meeting Suggestions Request
AverageTimetoProcessaMeetingS uggestionsRequest
none UTILIZATIO
N
false 5
Average Time to Process a Cross-Forest Free Busy Request
AverageTimetoProcessaCross-ForestFreeBusyRequest
none UTILIZATIO
N
false 5
Cross-Forest Calendar Queries (sec) Cross-ForestCalendarQueries(sec) none UTILIZATIO N false 5
Average Time to Process a Free Busy Request AverageTimetoProcessaFreeBusy Request none UTILIZATIO N true 5
Client-Reported Failures - Partial or Other Failures Client-ReportedFailures-PartialorOtherFailures none UTILIZATIO N false 5
Availability Availability percent
age
UTILIZATIO N
true 10
Current Requests CurrentRequests none UTILIZATIO
N
false 5
Cross-Site Calendar Queries (sec) Cross-SiteCalendarQueries(sec) none UTILIZATIO N
false 5
Client-Reported Failures - Total Client-ReportedFailures-Total none UTILIZATIO N false 5 ClientReported Failures -Connection Failures Client-ReportedFailures-ConnectionFailures none UTILIZATIO N false 5
Federated Free Busy Calendar Queries (sec) FederatedFreeBusyCalendarQueri es(sec) none UTILIZATIO N false 5
Table 3
‑5. Exchange Availability Service Metrics (Continued)
Name Alias Units Category
Default On
Default Interval in minutes
Public Folder Request Failures (sec)
PublicFolderRequestFailures(sec) none UTILIZATIO N
false 5
Successful Client-Reported Requests - Over 20 seconds
SuccessfulClient- ReportedRequests-Over20seconds none UTILIZATIO N false 5
Intra-Site Calendar Failures (sec) Intra-SiteCalendarFailures(sec) none UTILIZATIO N
false 5
Average Time to Process an Intra-Site Free Busy Request
AverageTimetoProcessanIntra-SiteFreeBusyRequest
none UTILIZATIO
N
false 5
Intra-Site Calendar Queries (sec) Intra-SiteCalendarQueries(sec) none UTILIZATIO N
false 5
Successful Client-Reported Requests - Less than 10 seconds
SuccessfulClient- ReportedRequests-Lessthan10seconds none UTILIZATIO N false 5
Foreign Connector Request Failure Rate ForeignConnectorRequestFailure Rate none UTILIZATIO N false 5
Intra-Site Proxy Free Busy Calendar Queries (sec)
Intra-SiteProxyFreeBusyCalendarQueri es(sec) none UTILIZATIO N false 5
Average Time to Process a Federated Free Busy Request
AverageTimetoProcessaFederate dFreeBusyRequest
none UTILIZATIO
N
false 5
Cross-Site Calendar Failures (sec) Client-ReportedFailures-AutodiscoverFailures
none UTILIZATIO
N
false 5
Successful Client-Reported Requests - Less than 20 seconds
SuccessfulClient- ReportedRequests-Lessthan20seconds none UTILIZATIO N false 5
Client-Reported Failures - Timeout Failures Client-ReportedFailures-TimeoutFailures none UTILIZATIO N false 5
Exchange Database Instance Service Metrics
The VMware vRealize End Point Operations for Microsoft Exchange Server collects Exchange server
metrics.
Table 3
‑6. Exchange Database Instance Service Metrics
Name Alias Units Category
Defaul t On
Default Interval in minutes
I/O Database Reads (Recovery) Average Latency
I/ODatabaseReads(Recov ery)AverageLatency
none UTILIZATION false 5
I/O Database Writes (Attached) Average Latency
I/ODatabaseWrites(Attach ed)AverageLatency
Table 3
‑6. Exchange Database Instance Service Metrics (Continued)
Name Alias Units Category
Defaul t On Default Interval in minutes Database Cache Requests/sec DatabaseCacheRequest s/sec
none UTILIZATION false 5
Version buckets allocated Versionbucketsallocated none UTILIZATION false 5
Log File Current Generation LogFileCurrentGeneration none UTILIZATION false 5
Table Open Cache Misses/sec TableOpenCacheMisses/s ec
none UTILIZATION false 5
I/O Database Writes (Recovery) Average Latency
I/ODatabaseWrites(Recov ery)AverageLatency
none UTILIZATION false 5
I/O Database Reads (Attached) Average Latency
I/ODatabaseReads(Attach ed)AverageLatency
none UTILIZATION false 5
Table Open Cache % Hit TableOpenCache%Hit none UTILIZATION false 5
I/O Log Writes/sec I/OLogWrites/sec none UTILIZATION false 5
Database Cache % Hit DatabaseCache%Hit none UTILIZATION false 5
I/O Database Writes (Recovery)/sec
I/ODatabaseWrites(Recov ery)/sec
none UTILIZATION false 5
Availability Availability percentage AVAILABILITY true 10
Defragmentation Tasks Pending
DefragmentationTasksPen ding
none UTILIZATION false 5
Database Cache Misses/sec DatabaseCacheMisses/se c
none UTILIZATION false 5
I/O Database Writes Average Latency
I/ODatabaseWritesAverag eLatency
none UTILIZATION true 5
Tables Open TablesOpen none UTILIZATION false 5
Database Cache % Hit (Uncorrelated)
DatabaseCache %Hit(Uncorrelated)
none UTILIZATION false 5
Sessions In Use SessionsInUse none UTILIZATION false 5
I/O Log Reads/sec I/OLogReads/sec none UTILIZATION false 5
Table Opens/sec TableOpens/sec none UTILIZATION false 5
I/O Log Reads Average Latency
I/OLogReadsAverageLate ncy
none UTILIZATION false 5
I/O Database Writes/sec I/ODatabaseWrites/sec none UTILIZATION false 5
I/O Log Writes Average Latency
I/OLogWritesAverageLate ncy
none UTILIZATION false 5
I/O Database Writes/sec I/ODatabaseWrites/sec none UTILIZATION false 5
I/O Log Writes Average Latency
I/OLogWritesAverageLate ncy
none UTILIZATION false 5
Table 3
‑6. Exchange Database Instance Service Metrics (Continued)
Name Alias Units Category
Defaul t On
Default Interval in minutes
I/O Database Reads (Attached)/sec
I/ODatabaseReads(Attach ed)/sec
none UTILIZATION false 5
Log Bytes Generated/sec LogBytesGenerated/sec none UTILIZATION false 5
Table Closes/sec TableCloses/sec none UTILIZATION false 5
Log Writes/sec LogWrites/sec none UTILIZATION false 5
Log Files Generated Prematurely
LogFilesGeneratedPremat urely
none UTILIZATION false 5
Log Bytes Write/sec LogBytesWrite/sec none UTILIZATION false 5
Log Generation Loss Resiliency Depth
LogGenerationLossResilie ncyDepth
none UTILIZATION false 5
I/O Database Reads (Recovery)/sec
I/ODatabaseReads(Recov ery)/sec
none UTILIZATION false 5
Database Maintenance Pages Bad Checksums
DatabaseMaintenancePag esBadChecksums
none UTILIZATION false 5
Log Files Generated LogFilesGenerated none UTILIZATION false 5
Database Cache Size (MB) DatabaseCacheSize(MB) none UTILIZATION false 5
Log Record Stalls/sec LogRecordStalls/sec none UTILIZATION false 5
I/O Database Reads Average Latency
I/ODatabaseReadsAverag eLatency
none UTILIZATION false 5
Defragmentation Tasks DefragmentationTasks none UTILIZATION false 5
I/O Database Writes (Attached)/sec
I/ODatabaseWrites(Attach ed)/sec
none UTILIZATION false 5
Defragmentation Tasks DefragmentationTasks none UTILIZATION false 5
I/O Database Writes (Attached)/sec
I/ODatabaseWrites(Attach ed)/sec
none UTILIZATION false 5
Log Generation Checkpoint Depth Target
LogGenerationCheckpoint DepthTarget
none UTILIZATION false 5
Streaming Backup Pages Read/sec
StreamingBackupPagesR ead/sec
none UTILIZATION false 5
Sessions % Used Sessions%Used none UTILIZATION false 5
I/O Database Reads/sec I/ODatabaseReads/sec none UTILIZATION false 5
Log Generation Checkpoint Depth Max
LogGenerationCheckpoint DepthMax
none UTILIZATION false 5
Log Generation Checkpoint Depth
LogGenerationCheckpoint Depth
none UTILIZATION false 5
Database Maintenance Duration
DatabaseMaintenanceDur ation
Table 3
‑6. Exchange Database Instance Service Metrics (Continued)
Name Alias Units Category
Defaul t On
Default Interval in minutes
Log Threads Waiting LogThreadsWaiting none UTILIZATION false 5
Log Checkpoint Depth as a % of Target
LogCheckpointDepthasa %ofTarget
none UTILIZATION false 5
Exchange Database Service Metrics
The VMware vRealize End Point Operations for Microsoft Exchange Server collects Exchange Database
Service metrics.
Table 3
‑7. Exchange Database Service Metrics
Name Alias Units Category
Defaul t On
Default Interval in minutes
I/O Database Reads (Recovery) Average Latency
I/ODatabaseReads(Recov ery)AverageLatency
none UTILIZATION false 5
I/O Database Writes (Attached) Average Latency
I/ODatabaseWrites(Attach ed)AverageLatency
none UTILIZATION false 5
Database Cache Requests/sec
DatabaseCacheRequest s/sec
none UTILIZATION false 5
Database Cache Size Effective
DatabaseCacheSizeEffecti ve
none UTILIZATION false 5
Database Page Faults/sec DatabasePageFaults/sec none UTILIZATION false 5
Version Buckets Allocated VersionBucketsAllocated none UTILIZATION false 5
Table Open Cache Misses/sec TableOpenCacheMisses/s ec
none UTILIZATION false 5
I/O Database Writes (Recovery) Average Latency
I/ODatabaseWrites(Recov ery)AverageLatency
none UTILIZATION false 5
I/O Database Reads (Attached) Average Latency
I/ODatabaseReads(Attach ed)AverageLatency
none UTILIZATION false 5
Database Cache % Dehydrated
DatabaseCache %Dehydrated
none UTILIZATION false 5
Table Open Cache % Hit TableOpenCache%Hit none UTILIZATION false 5
Database Cache Size DatabaseCacheSize none UTILIZATION false 5
I/O Log Writes/sec I/OLogWrites/sec none UTILIZATION false 5
Database Cache % Hit DatabaseCache%Hit none UTILIZATION false 5
I/O Database Writes (Recovery)/sec
I/ODatabaseWrites(Recov ery)/sec
none UTILIZATION false 5
Table 3
‑7. Exchange Database Service Metrics (Continued)
Name Alias Units Category
Defaul t On
Default Interval in minutes
Database Page Fault Stalls/sec
DatabasePageFaultStall s/sec
none UTILIZATION false 5
Defragmentation Tasks Pending
DefragmentationTasksPen ding
none UTILIZATION false 5
Database Cache Memory Reserved (MB)
DatabaseCacheMemoryR eserved(MB)
none UTILIZATION false 5
Database Cache Misses/sec DatabaseCacheMisses/se c
none UTILIZATION false 5
I/O Database Writes Average Latency
I/ODatabaseWritesAverag eLatency
none UTILIZATION false 5
Tables Open TableOpens/sec none UTILIZATION false 5
I/O Log Reads Average Latency
I/OLogReadsAverageLate ncy
none UTILIZATION false 5
Table Open Cache Hits/sec TableOpenCacheHits/sec none UTILIZATION false 5
I/O Database Reads (Attached)/sec
I/ODatabaseReads(Attach ed)/sec
none UTILIZATION false 5
Database Cache Size Resident (MB)
DatabaseCacheSizeResid ent(MB)
none UTILIZATION false 5
Log Bytes Generated/sec LogBytesGenerated/sec none UTILIZATION false 5
Table Closes/sec TableCloses/sec none UTILIZATION false 5
Log Writes/sec DatabasePageEvictions/se
c
none UTILIZATION false 5
Database Cache Memory Committed (MB)
DatabaseCacheMemoryC ommitted(MB)
none UTILIZATION false 5
Log Bytes Write/sec LogBytesWrite/sec none UTILIZATION false 5
I/O Database Reads (Recovery)/sec
I/ODatabaseReads(Recov ery)/sec
none UTILIZATION false 5
Database Cache Memory Reserved
DatabaseCacheMemoryR eserved
none UTILIZATION false 5
Database Maintenance Pages Bad Checksums
DatabaseMaintenancePag esBadChecksums
none UTILIZATION false 5
Database Cache Size (MB) DatabaseCacheSize(MB) none UTILIZATION false 5
Log Record Stalls/sec LogRecordStalls/sec none UTILIZATION true 5
I/O Database Reads Average Latency
I/ODatabaseReadsAverag eLatency
none UTILIZATION true 5
Defragmentation Tasks DefragmentationTasks none UTILIZATION false 5
I/O Database Writes (Attached)/sec
I/ODatabaseWrites(Attach ed)/sec
Table 3
‑7. Exchange Database Service Metrics (Continued)
Name Alias Units Category
Defaul t On
Default Interval in minutes
Sessions % Used Sessions%Used none UTILIZATION false 5
I/O Database Reads/sec I/ODatabaseReads/sec none UTILIZATION false 5
Database Cache Size Effective (MB)
DatabaseCacheSizeEffecti ve(MB)
none UTILIZATION false 5
Database Maintenance Duration
DatabaseMaintenanceDur ation
none UTILIZATION false 5
Log Threads Waiting LogThreadsWaiting none UTILIZATION true 5
Database Cache Memory Committed
DatabaseCacheMemoryC ommitted
none UTILIZATION false 5
Database Cache Size Resident
DatabaseCacheSizeResid ent
none UTILIZATION false 5
Exchange Diagnostics Service Metrics
The VMware vRealize End Point Operations for Microsoft Exchange Server collects Exchange
Diagnostics Service metrics.
Table 3
‑8. Exchange Diagnostics Service Metrics
Name Alias Units Category
Default On
Default Interval in minutes
Retry count since last successful upload
Retrycountsincelastsuccessful upload
none UTILIZATION false 5
Exchange Servers total ExchangeServerstotal none UTILIZATION false 5
Upload latency for last batch Uploadlatencyforlastbatch none UTILIZATION false 5
Total topology updates Uploadlatencyforlastbatch none UTILIZATION false 5
Start Time StartTime
epoch-millis
AVAILABILIT Y
false 10
Bytes left to be processed on disk
Byteslefttobeprocessedondisk none UTILIZATION false 5
Cpu Usage Usage percenta
ge
UTILIZATION false 5
Hub Transport Servers total HubTransportServerstotal none UTILIZATION false 5
Open Handles OpenHandles none UTILIZATION false 5
Table 3
‑8. Exchange Diagnostics Service Metrics (Continued)
Name Alias Units Category
Default On
Default Interval in minutes
Availability Availability percenta
ge
AVAILABILIT Y
false 10
Average connection open latency for last hundred batches
Averageconnectionopenlatenc yforlasthundredbatches
none UTILIZATION false 5
Cpu Total Time TotalTime none UTILIZATION false 10
Cpu Total Time per Minute TotalTime1m ms UTILIZATION false 10
Edge Servers leased total EdgeServersleasedtotal ms UTILIZATION false 5
Number of batches uploaded for the last hour
Numberofbatchesuploadedfort helasthour
none UTILIZATION false 5
Threads Threads none UTILIZATION false 5
Resident Memory Size ResidentMemSize B UTILIZATION true 5
Failed uploads in last hundred batches
Faileduploadsinlasthundredbat ches
none UTILIZATION false 5
Memory Size MemSize B UTILIZATION false 5
Cpu User Time UserTime ms UTILIZATION false 5
Cpu User Time per Minute UserTime1m none UTILIZATION false 5
SyncNow Edges not completed total
SyncNowEdgesnotcompletedt otal
none UTILIZATION false 5
Successful uploads in last hundred batches
Successfuluploadsinlasthundre dbatches
none UTILIZATION false 5
Average upload size for last hundred batches
Averageuploadsizeforlasthundr edbatches
none UTILIZATION false 5
Upload size for last batch Uploadsizeforlastbatch none UTILIZATION false 5
Start Type StartType none AVAILABILIT
Y
false 10
SyncNow started total SyncNowstartedtotal none UTILIZATION false 5
Exchange EdgeSync service Metrics
The VMware vRealize End Point Operations for Microsoft Exchange Server collects Exchange EdgeSync
Service metrics.
Table 3
‑9. Exchange EdgeSync service Metrics
Name Alias Units Category Default On
Default Interval in minutes
Objects Added per Synchronization
ObjectsAddedperSync hronizationCycle
Exchange Frontend Transport Service Metrics
The VMware vRealize End Point Operations for Microsoft Exchange Server collects Exchange Frontend
Transport Service metrics.
Table 3
‑10. Exchange Frontend Transport Service Metrics
Name Alias Units
Categor y Defau lt On Default Interval in minutes
SmtpSend: Connections Total Connections Total none UTILIZA
TION
false 5
SmtpSend: Average recipients/message Average recipients/message none UTILIZA TION
false 5
Hub Selection Organization Mailbox Failures HubSelectionOrganizationMailbox Failures none UTILIZA TION false 5
Hub Selection Messages Without Mailbox Recipients HubSelectionMessagesWithoutMa ilboxRecipients none UTILIZA TION false 5
SmtpSend: Messages Suppressed Due to Bare Linefeeds
Messages Suppressed Due to Bare Linefeeds
none UTILIZA TION
false 5
SmtpSend: Connection Failures Connection Failures none UTILIZA
TION
false 5
Start Time StartTime epoc
h-millis
AVAILA BILITY
false 10
SMTPReceive: Bytes Received/sec Bytes Received/sec none UTILIZA
TION
false 5
Hub Selection Requests Total HubSelectionRequestsTotal none UTILIZA
TION
false 5
SMTPReceive: Bytes Received Total Bytes Received Total none UTILIZA
TION
false 5
SMTPReceive: InboundRecipients accepted Total
InboundRecipients accepted Total none UTILIZA TION
false 5
SMTPReceive: Tarpitting Delays Anonymous
Tarpitting Delays Anonymous none UTILIZA TION
false 5
SMTPReceive: Inbound Messages Received Total
Inbound Messages Received Total none UTILIZA TION
false 5
SmtpSend: Message Bytes Sent/sec Message Bytes Sent/sec none UTILIZA TION
false 5
SMTPReceive: Connections Created/sec for inbound proxy messages
Connections Created/sec for inbound proxy messages
none UTILIZA TION
false 5
Open Handles OpenHandles none UTILIZA
TION
false 5
Availability Availability none AVAILA
BILITY
Table 3
‑10. Exchange Frontend Transport Service Metrics (Continued)
Name Alias Units
Categor y Defau lt On Default Interval in minutes
SMTPReceive: Inbound Message Bytes Received/sec
Inbound Message Bytes Received/sec perce ntage AVAILA BILITY false 5 SMTPReceive: InboundMessages Refused for Size
InboundMessages Refused for Size
none UTILIZA TION
false 5
SmtpSend: Protocol Errors Protocol Errors none UTILIZA
TION
false 5
SMTPReceive: Inbound Message Bytes Received Total
Inbound Message Bytes Received Total
none UTILIZA TION
false 5
SmtpSend: Messages Sent/sec Messages Sent/sec none UTILIZA
TION
false 5
SmtpSend: Connections Current Connections Current none UTILIZA
TION
false 5
Resident Memory Size ResidentMemSize B UTILIZA
TION
false 5
MessagesSuccessfullyRouted MessagesSuccessfullyRouted none UTILIZA
TION
false 5
Memory Size MemSize B UTILIZA
TION
false 5
Cpu User Time UserTime ms UTILIZA
TION
false 10
Cpu User Time per Minute UserTime1m ms UTILIZA
TION
false 10
SMTPReceive: Tarpitting Delays Anonymous/sec
Tarpitting Delays Anonymous/sec none UTILIZA TION
false 5
Hub Selection Messages Without Organization Mailboxes HubSelectionMessagesWithoutOr ganizationMailboxes none UTILIZA TION false 5
MessagesFailedToRoute MessagesFailedToRoute none UTILIZA
TION
false 5
Hub Selection Resolver Failures HubSelectionResolverFailures none UTILIZA TION
false 5
SmtpSend: DNS Errors DNS Errors none UTILIZA
TION
false 5
SmtpSend: Average bytes/connection Average bytes/connection none UTILIZA TION
false 5
SMTPReceive: Connections Total Connections Total none UTILIZA
TION
false 5
Hub Selection Routing Failures HubSelectionRoutingFailures none UTILIZA TION
false 5
Routing NDRs Total RoutingNDRsTotal none UTILIZA
TION
Table 3
‑10. Exchange Frontend Transport Service Metrics (Continued)
Name Alias Units
Categor y Defau lt On Default Interval in minutes SMTPReceive: Connections Created/sec
Connections Created/sec none UTILIZA
TION
false 5
SmtpSend: Average messages/connection
Average messages/connection none UTILIZA TION
false 5
SmtpSend: Bytes Sent/sec Bytes Sent/sec none UTILIZA
TION
false 5
Cpu Usage Usage perce
ntage
UTILIZA TION
true 5
SmtpSend: Bytes Sent Total Bytes Sent Total none UTILIZA
TION
false 5
Routing Tables Calculated Total RoutingTablesCalculatedTotal none UTILIZA TION false 5 SMTPReceive: Average recipients/inbound message Average recipients/inbound message none UTILIZA TION false 5
SMTPReceive: Average inbound messages/connection Average inbound messages/connection none UTILIZA TION false 5
SMTPReceive: Tarpitting Delays Authenticated
Tarpitting Delays Authenticated none UTILIZA TION
false 5
SmtpSend: Connections Created/sec Connections Created/sec none UTILIZA TION
false 5
SMTPReceive: Inbound Message Connections Current
Inbound Message Connections Current
none UTILIZA TION
false 5
SMTPReceive: Average bytes/inbound message
Average bytes/inbound message none UTILIZA TION
false 5
SmtpSend: Message Bytes Sent Total Message Bytes Sent Total B UTILIZA TION
false 10
SmtpSend: Message Bytes Sent Total per Minute
Message Bytes Sent Total1m B UTILIZA
TION
true 10
SMTPReceive: Inbound Message Connections Total
Inbound Message Connections Total none UTILIZA TION false 5 SMTPReceive: Average bytes/connection
Average bytes/connection none UTILIZA
TION
false 5
SMTPReceive: Disconnections By Agents
Disconnections By Agents none UTILIZA
TION
false 5
Cpu Total Time TotalTime none UTILIZA
TION
false 5
Cpu Total Time per Minute TotalTime1m none UTILIZA
TION
false 10
Cpu System Time SystemTime none UTILIZA
TION
Table 3
‑10. Exchange Frontend Transport Service Metrics (Continued)
Name Alias Units
Categor y Defau lt On Default Interval in minutes
Cpu System Time per Minute SystemTime1m none UTILIZA
TION
false 10
Routing Tables Changed Total RoutingTablesChangedTotal none UTILIZA
TION
false 5
SmtpSend: Recipients sent Recipients sent none UTILIZA
TION
false 5
Threads Threads none UTILIZA
TION
false 5
SmtpSend: Socket Errors Socket Errors none UTILIZA
TION
false 5
Hub Selection Fallback Routing Requests HubSelectionFallbackRoutingReq uests none UTILIZA TION false 5
SMTPReceive: Inbound Messages Received/sec
Inbound Messages Received/sec none UTILIZA TION
false 5
SMTPReceive: Connections Current Connections Current none UTILIZA
TION
false 5
SMTPReceive: Connections Current Messages Sent Total none UTILIZA
TION
false 10
SmtpSend: Messages Sent Total per Minute
Messages Sent Total1m none UTILIZA
TION
true 10
SMTPReceive: Disconnections by Agents/second
Disconnections by Agents/second none UTILIZA TION
false 5
SmtpSend: Average message bytes/message
Average message bytes/message none UTILIZA TION
false 5
SMTPReceive: Tarpitting Delays Authenticated/sec Tarpitting Delays Authenticated/sec none UTILIZA TION false 5
Start Type StartType none UTILIZA
TION
false 10
Exchange Health Manager Service Metrics
The VMware vRealize End Point Operations for Microsoft Exchange Server collects Exchange Health
Manager Service metrics.
Table 3
‑11. Exchange Health Manager Service Metrics
Name Alias Units Category Default On
Default Interval in minutes
Availability Availability percentage AVAILABILITY true 10
Threads Threads none UTILIZATION false 5
Resident Memory Size
ResidentMe mSize
Table 3
‑11. Exchange Health Manager Service Metrics (Continued)
Name Alias Units Category Default On
Default Interval in minutes
Memory Size MemSize B UTILIZATION false 5
Cpu Total Time
TotalTime ms UTILIZATION false 10
Cpu Total Time per Minute
TotalTime1m ms UTILIZATION false 10
Cpu User Time
UserTime ms UTILIZATION false 10
Cpu User Time per Minute
UserTime1m ms UTILIZATION false 10
Cpu System Time
SystemTime ms UTILIZATION false 10
Cpu System Time per Minute SystemTime 1m ms UTILIZATION false 10
Start Time StartTime epoch-millis AVAILABILITY false 10
Cpu Usage Usage percentage UTILIZATION false 5
Open Handles
OpenHandle s
OpenHandles UTILIZATION true 5
Start Type Start Type none AVAILABILITY false 10
Exchange IMAP4 Backend Service Metrics
The VMware vRealize End Point Operations for Microsoft Exchange Server collects Exchange IMAP4
Backend Service metrics.
Table 3
‑12. Exchange IMAP4 Backend Service Metrics
Name Alias Units
Categor
y Default On
Default Interval in minutes
LSUB Rate LSUBRate none UTILIZA
TION
false 5
Copy Rate CopyRate none UTILIZA
TION
false 5
Request Failures RequestFailures none UTILIZA
TION
false 5
Total IMAP UID Items Fixed TotalIMAPUIDItemsFixed none UTILIZA TION
false 5
XPROXY Rate XPROXYRate none UTILIZA
TION
Table 3
‑12. Exchange IMAP4 Backend Service Metrics (Continued)
Name Alias Units
Categor
y Default On
Default Interval in minutes
Folder View Reload Total FolderViewReloadTotal none UTILIZA
TION
false 5
List Failures ListFailures none UTILIZA
TION
false 5
Idle Total IdleTotal none UTILIZA
TION
false 5
Namespace Total NamespaceTotal none UTILIZA
TION
false 5
Proxy Current Connections ProxyCurrentConnections none UTILIZA TION
false 5
Store Failures StoreFailures none UTILIZA
TION
false 5
Idle Failures IdleFailures none UTILIZA
TION
false 5
Subscribe Rate SubscribeRate none UTILIZA
TION
false 5
Capability Total CapabilityTotal none UTILIZA
TION
false 5
Examine Total ExamineTotal none UTILIZA
TION
false 5
Rename Total RenameTotal none UTILIZA
TION
false 5
STARTTLSTotal STARTTLSTotal none UTILIZA
TION
false 5
Close Rate CloseRate none UTILIZA
TION
false 5
Active SSL Connections ActiveSSLConnections none UTILIZA
TION
false 5
Expunge Failures ExpungeFailures none UTILIZA
TION
false 5
NOOP Rate NOOPRate none UTILIZA
TION false 5 TransientStorageErrors/minut e TransientStorageErrors/minut e none UTILIZA TION false 5
Delete Rate DeleteRate none UTILIZA
TION
false 5
Close Total CloseTotal none UTILIZA
TION
false 5
Resident Memory Size ResidentMemSize none UTILIZA
TION
Table 3
‑12. Exchange IMAP4 Backend Service Metrics (Continued)
Name Alias Units
Categor y Default On Default Interval in minutes Unauthenticated Connections/sec UnauthenticatedConnection s/sec none UTILIZA TION false 5
Permanent Active Directory Errors/minute PermanentActiveDirectoryErr ors/minute none UTILIZA TION false 5
Authenticate Rate AuthenticateRate none UTILIZA
TION
false 5
Select Rate SelectRate none UTILIZA
TION
false 5
Delete Total DeleteTotal none UTILIZA
TION
false 5
Fetch Rate FetchRate none UTILIZA
TION
false 5
Status Total Status Total none UTILIZA
TION
false 5
Request Total RequestTotal none UTILIZA
TION
false 5
Logout Rate LogoutRate none UTILIZA
TION false 5 CurrentUnauthenticatedConn ections CurrentUnauthenticatedConn ections none UTILIZA TION false 5
Transient Active Directory Errors/minute TransientActiveDirectoryError s/minute none UTILIZA TION false 5
Invalid Commands Rate InvalidCommandsRate none UTILIZA
TION
false 5
Close Failures Close Failures none UTILIZA
TION
false 5
Append Rate AppendRate none UTILIZA
TION
false 5
Namespace Failures Namespace Failures none UTILIZA
TION
false 5
Unsubscribe Total UnsubscribeTotal none UTILIZA
TION
false 5
SSL Connections SSLConnections none UTILIZA
TION false 5 Average Command Processing Time (milliseconds) AverageCommandProcessin gTime(milliseconds) none UTILIZA TION false 5
Capability Rate CapabilityRate none UTILIZA
TION
false 5
Check Rate CheckRate none UTILIZA
TION
Table 3
‑12. Exchange IMAP4 Backend Service Metrics (Continued)
Name Alias Units
Categor
y Default On
Default Interval in minutes
Cpu Total Time TotalTime none UTILIZA
TION
false 5
Cpu Total Time per Minute TotalTime1m none UTILIZA
TION
false 5
SearchFolder Creation Rate SearchFolderCreationRate none UTILIZA TION
false 5
Transient Errors/minute TransientErrors/minute none UTILIZA
TION
false 5
Namespace Rate NamespaceRate none UTILIZA
TION
false 5
Cpu System Time SystemTime none UTILIZA
TION
false 5
Cpu System Time per Minute SystemTime1m none UTILIZA
TION
false 5
Login Rate LoginRate none UTILIZA
TION
false 5
Status Failures StatusFailures none UTILIZA
TION
false 5
Current Connections CurrentConnections none UTILIZA
TION
false 5
XPROXY Failures XPROXYFailures none UTILIZA
TION
false 5
Login Failures LoginFailures none UTILIZA
TION
false 5
STARTTLS Failures STARTTLSFailures none UTILIZA
TION
false 5
Unsubscribe Failures UnsubscribeFailures none UTILIZA
TION
false 5
Copy Total CopyTotal none UTILIZA
TION
false 5
Login Total LoginTotal none UTILIZA
TION
false 5
Idle Rate IdleRate none UTILIZA
TION
false 5
Logout Failures LogoutFailures none UTILIZA
TION
false 5
XPROXY Total XPROXYTotal none UTILIZA
TION
false 5
Invalid Commands InvalidCommands none UTILIZA
TION
Table 3
‑12. Exchange IMAP4 Backend Service Metrics (Continued)
Name Alias Units
Categor
y Default On
Default Interval in minutes
Check Total CheckTotal none UTILIZA
TION
false 5
Examine Failures ExamineFailures none UTILIZA
TION
false 5
SelectTotal SelectTotal none UTILIZA
TION
false 5
SearchFolder Creation Total SearchFolderCreationTotal none UTILIZA TION
false 5
List Total ListTotal none UTILIZA
TION
false 5
Subscribe Total SubscribeTotal none UTILIZA
TION
false 5
Connections Rate ConnectionsRate none UTILIZA
TION
false 5
Start Time StartTime
epoch-millis
AVAILAB ILITY
false 5
Delete Failures DeleteFailures none UTILIZA
TION
false 5
Status Rate StatusRate none UTILIZA
TION
false 5
Fetch Total FetchTotal none UTILIZA
TION false 5 Permanent Storage Errors/minute PermanentStorageErrors/min ute none UTILIZA TION false 5
Average RPC Latency AverageRPCLatency none UTILIZA
TION
false 5
Unsubscribe Rate UnsubscribeRate none UTILIZA
TION
false 5
Authenticate Total AuthenticateTotal none UTILIZA
TION
false 5
LSUB Failures LSUBFailures none UTILIZA
TION
false 5
Current IMAP UID Fixes CurrentIMAPUIDFixes none UTILIZA
TION
false 5
Open Handles OpenHandles none UTILIZA
TION
false 5
Availability Availability percentag
e
AVAILAB ILITY
true 10
Append Failures AppendFailures none UTILIZA
TION
Table 3
‑12. Exchange IMAP4 Backend Service Metrics (Continued)
Name Alias Units
Categor
y Default On
Default Interval in minutes
Select Failures SelectFailures none UTILIZA
TION
false 5
Store Total StoreTotal none UTILIZA
TION
false 5
Folder View Reload Rate FolderViewReloadRate none UTILIZA
TION
false 5
Capability Failures CapabilityFailures none UTILIZA
TION
false 5
Create Total FolderViewReloadRate none UTILIZA
TION
false 5
NOOP Failures NOOPFailures none UTILIZA
TION
false 5
Check Failures CheckFailures none UTILIZA
TION
false 5
Create Failures CreateFailures none UTILIZA
TION
false 5
Memory Size MemSize B UTILIZA
TION
false 5
Cpu User Time UserTime ms UTILIZA
TION
false 10
UserTime UserTime1m ms UTILIZA
TION
false 10
Authenticate Failures AuthenticateFailures none UTILIZA
TION
false 5
Rename Failures RenameFailures none UTILIZA
TION
false 5
NOOP Total NOOPTotal none UTILIZA
TION
false 5
Rename Rate RenameRate none UTILIZA
TION
false 5
Copy Failures CopyFailures none UTILIZA
TION
false 5
Fetch Failures FetchFailures none UTILIZA
TION
false 5
Store Rate StoreRate none UTILIZA
TION
false 5
Proxy Connections Failed ProxyConnectionsFailed none UTILIZA TION
false 5
Expunge Total ExpungeTotal none UTILIZA
TION
Table 3
‑12. Exchange IMAP4 Backend Service Metrics (Continued)
Name Alias Units
Categor
y Default On
Default Interval in minutes
Connections Failed ConnectionsFailed none UTILIZA
TION
false 5
Proxy Total Connections Proxy Total Connections none UTILIZA TION
false 5
Cpu Usage Usage none UTILIZA
TION
false 5
Expunge Rate ExpungeRate none UTILIZA
TION
false 5
Connections Total ConnectionsTotal none UTILIZA
TION
false 5
Connections Rejected ConnectionsRejected none UTILIZA
TION
false 5
LSUB Total LSUBTotal none UTILIZA
TION
false 5
ListRate ListRate none UTILIZA
TION
false 5
Append Total AppendTotal none UTILIZA
TION
false 5
Request Rate RequestRate none UTILIZA
TION
false 5
Logout Total LogoutTotal none UTILIZA
TION
false 5
Mailbox Offline Errors/minute MailboxOfflineErrors/minute none UTILIZA TION
false 5
Search Rate SearchRate none UTILIZA
TION
false 5
Examine Rate ExamineRate none UTILIZA
TION
false 5
Search Total SearchTotal none UTILIZA
TION
false 5
Total IMAP UID Fixes TotalIMAPUIDFixes none UTILIZA
TION
false 5
Transient Mailbox Connection Failures/minute TransientMailboxConnection Failures/minute none UTILIZA TION false 5
Threads Threads none UTILIZA
TION
false 5
Create Rate CreateRate none UTILIZA
TION
false 5
Subscribe Failures SubscribeFailures none UTILIZA
TION
Table 3
‑12. Exchange IMAP4 Backend Service Metrics (Continued)
Name Alias Units
Categor
y Default On
Default Interval in minutes
Average LDAP Latency AverageLDAPLatency none UTILIZA
TION
false 5
STARTTLS Rate STARTTLSRate none UTILIZA
TION
false 5
Start Type StartType none AVAILAB
ILITY
false 10
SearchFailures SearchFailures none UTILIZA
TION
false 5
Exchange IMAP4 Service Metrics
The VMware vRealize End Point Operations for Microsoft Exchange Server collects Exchange IMAP4
Service metrics.
Table 3
‑13. Exchange IMAP4 Service Metrics
Name Alias Units Category
Default On
Default Interval in minutes
LSUB Rate LSUBRate none UTILIZATIO
N
false 5
Copy Rate CopyRate none UTILIZATIO
N
false 5
Request Failures RequestFailures none UTILIZATIO
N
false 5
Total IMAP UID Items Fixed TotalIMAPUIDItemsFixed none UTILIZATIO N
false 5
XPROXY Rate XPROXYRate none UTILIZATIO
N
false 5
Folder View Reload Total FolderViewReloadTotal none UTILIZATIO
N
false 5
List Failures ListFailures none UTILIZATIO
N
false 5
Idle Total IdleTotal none UTILIZATIO
N
false 5
Namespace Total Namespace Total none UTILIZATIO
N
false 5
Proxy Current Connections ProxyCurrentConnections none UTILIZATIO N
false 5
Store Failures Store Failures none UTILIZATIO
N
false 5
Idle Failures IdleFailures none UTILIZATIO
N
Table 3
‑13. Exchange IMAP4 Service Metrics (Continued)
Name Alias Units Category
Default On
Default Interval in minutes
Subscribe Rate SubscribeRate none UTILIZATIO
N
false 5
CapabilityTotal CapabilityTotal none UTILIZATIO
N
false 5
Examine Total ExamineTotal none UTILIZATIO
N
false 5
Rename Total RenameTotal none UTILIZATIO
N
false 5
STARTTLS Total STARTTLSTotal none UTILIZATIO
N
false 5
Close Rate CloseRate none UTILIZATIO
N
false 5
Active SSL Connections Active SSL Connections none UTILIZATIO
N
false 5
Expunge Failures ExpungeFailures none UTILIZATIO
N
false 5
NOOP Rate NOOPRate none UTILIZATIO
N
false 5
Transient Storage Errors/minute TransientStorageErrors/minut e
none UTILIZATIO
N
false 5
Delete Rate DeleteRate none UTILIZATIO
N
false 5
Close Total CloseTotal none UTILIZATIO
N
false 5
Resident Memory Size ResidentMemSize B UTILIZATIO
N
true 5
Unauthenticated Connections/sec UnauthenticatedConnection s/sec
none UTILIZATIO
N
false 5
Permanent Active Directory Errors/minute PermanentActiveDirectoryErr ors/minute none UTILIZATIO N false 5
Authenticate Rate AuthenticateRate none UTILIZATIO
N
false 5
Select Rate SelectRate none UTILIZATIO
N
false 5
Delete Total DeleteTotal none UTILIZATIO
N
false 5
Fetch Rate FetchRate none UTILIZATIO
N
false 5
Status Total StatusTotal none UTILIZATIO
N
Table 3
‑13. Exchange IMAP4 Service Metrics (Continued)
Name Alias Units Category
Default On
Default Interval in minutes
Request Total RequestTotal none UTILIZATIO
N
false 5
Logout Rate LogoutRate none UTILIZATIO
N false 5 Current Unauthenticated Connections CurrentUnauthenticatedConn ections none UTILIZATIO N false 5
Transient Active Directory Errors/minute TransientActiveDirectoryError s/minute none UTILIZATIO N false 5
Invalid Commands Rate InvalidCommandsRate none UTILIZATIO
N
false 5
Close Failures CloseFailures none UTILIZATIO
N
false 5
Append Rate AppendRate none UTILIZATIO
N
false 5
Namespace Failures NamespaceFailures none UTILIZATIO
N
false 5
Unsubscribe Total UnsubscribeTotal none UTILIZATIO
N
false 5
SSL Connections SSLConnections none UTILIZATIO
N
false 5
Average Command Processing Time (milliseconds) AverageCommandProcessing Time(milliseconds) none UTILIZATIO N false 5
Capability Rate CapabilityRate none UTILIZATIO
N
false 5
Check Rate CheckRate none UTILIZATIO
N
false 5
Cpu Total Time Total Time ms UTILIZATIO
N
false 10
Cpu Total Time per Minute TotalTime1m ms UTILIZATIO
N
false 10
SearchFolder Creation Rate SearchFolderCreationRate none UTILIZATIO N
false 5
Transient Errors/minute TransientErrors/minute none UTILIZATIO
N
false 5
Namespace Rate NamespaceRate none UTILIZATIO
N
false 5
Cpu System Time SystemTime ms UTILIZATIO
N
false 10
Cpu System Time per Minute SystemTime1m none UTILIZATIO
N
Table 3
‑13. Exchange IMAP4 Service Metrics (Continued)
Name Alias Units Category
Default On
Default Interval in minutes
Login Rate LoginRate none UTILIZATIO
N
false 5
Status Failures StatusFailures none UTILIZATIO
N
false 5
CurrentConnections CurrentConnections none UTILIZATIO
N
false 5
XPROXY Failures XPROXYFailures none UTILIZATIO
N
false 5
Login Failures LoginFailures none UTILIZATIO
N
false 5
STARTTLS Failures STARTTLSFailures none UTILIZATIO
N
false 5
UnsubscribeFailures UnsubscribeFailures none UTILIZATIO
N
false 5
Copy Total CopyTotal none UTILIZATIO
N
false 5
Login Total LoginTotal none UTILIZATIO
N
false 5
Idle Rate IdleRate none UTILIZATIO
N
false 5
Logout Failures LogoutFailures none UTILIZATIO
N
false 5
XPROXY Total XPROXYTotal none UTILIZATIO
N
false 5
Invalid Commands InvalidCommands none UTILIZATIO
N
false 5
Check Total CheckTotal none UTILIZATIO
N
false 5
Examine Failures ExamineFailures none UTILIZATIO
N
false 5
Select Total SelectTotal none UTILIZATIO
N
false 5
SearchFolder Creation Total SearchFolderCreationTotal none UTILIZATIO N
false 5
List Total ListTotal none UTILIZATIO
N
false 5
Subscribe Total Subscribe Total none UTILIZATIO
N
false 5
Connections Rate ConnectionsRate none UTILIZATIO
N
Table 3
‑13. Exchange IMAP4 Service Metrics (Continued)
Name Alias Units Category
Default On
Default Interval in minutes
Start Time StartTime
epoch-millis
AVAILABILI TY
false 10
Delete Failures DeleteFailures none UTILIZATIO
N
false 5
Status Rate StatusRate none UTILIZATIO
N
false 5
FetchTotal FetchTotal none UTILIZATIO
N
false 5
Permanent Storage Errors/minute PermanentStorageErrors/min ute
none UTILIZATIO
N
false 5
Average RPC Latency AverageRPCLatency none UTILIZATIO
N
false 5
Unsubscribe Rate UnsubscribeRate none UTILIZATIO
N
false 5
Authenticate Total AuthenticateTotal none UTILIZATIO
N
false 5
LSUB Failures LSUBFailures none UTILIZATIO
N
false 5
Current IMAP UID Fixes CurrentIMAPUIDFixes none UTILIZATIO
N
false 5
Open Handles OpenHandles none UTILIZATIO
N
true 5
Availability Availability percent
age
AVAILABILI TY
true 10
Append Failures AppendFailures none UTILIZATIO
N
false 5
SelectFailures SelectFailures none UTILIZATIO
N
false 5
Store Total StoreTotal none UTILIZATIO
N
false 5
Folder View Reload Rate FolderViewReloadRate none UTILIZATIO
N
false 5
Capability Failures CapabilityFailures none UTILIZATIO
N
false 5
Create Total CreateTotal none UTILIZATIO
N
false 5
NOOP Failures NOOP Failures none UTILIZATIO
N
false 5
Check Failures CheckFailures none UTILIZATIO
N