How To Use An Esata External Hard Drive Enclosure (I386) With A Usb 2.0 And Usb 2/1.1 Hard Drive (I219) On A 2.5\" Hard Drive On A Mini Hard Drive Or An Ip

Instruction Manual 2 Installation Rear View Drive Ejection Button Power button/LED Duplicate/JBOD Mode button Duplicate Start button Duplicate Progress LED Drive Power/Activity

Insert the 2.5” or 3.5” SATA/SATA II drive(s) you wish to install, such that the SATA power and data connectors at the back of the drive are properly aligned with the

Compatible with both IDE or SATA (1.5/3.0Gbps) hard drives, the enclosure offers a cost-effective and convenient choice for a variety of uses including data backups, extra

To provide power to the enclosure, connect the USB to DC cable (provided) to an available USB port on the host computer, and insert the remaining end into the power port located

• Hard Drive Enclosure • USB Mini B Cable • eSATA Cable • IDE Cable • Driver CD • Enclosure Stand • Power Adapter • SP4 to LP4 Adapter Cable • SATA 7+15 pin

Remove the screws holding the Base Stand to the enclosure, and separate it from the Enclosure, then slide the Disk Mounting Tray out of the Enclosure:.. Gently place the hard

♦ In Windows XP: you can right-click on the ‘Stop’ mark, and then click ‘Initialize disk’ to initial the hard disk to the ‘Basic Disk’ type and can then create partition

(5) eSATA/USB port (select models only) Connects an optional high-performance eSATA component, such as an eSATA external hard drive, or connects an optional USB device.. NOTE: