Sunpak 72-in-1 High-speed Card Reader SIM Editor Software. Installation and Users Guide

SIM1 — Use the SIM card in the internal SIM card holder as the default SIM card to make a call, send a message, or transfer mobile data.. SIM2 — Use the SIM card in the external

The entire configuration is performed by simple text message commands you send to the product (the phone number of the SIM card in the product) from your mobile phone.. This

Only in this case, all phone numbers in the device phonebook (not that of the SIM card) will receive the corresponding alarm text message.. “Alarm Disable”

※ Using your mobile phone, send the following text message to the SIM card phone number: The letter “A” in caps lock followed by 1 (1 is the code used to register the phone number

If you purchase this tablet with a SIM card slot, you can access to the Internet via your 3G SIM card while Wi-Fi network is not available.. Please insert your 3G card into the

If parameter Backup SIM card is set to none, then parameters Switch to other SIM card when connection fails, Switch to backup SIM card when roaming is detected and switch to default

You can manage a phone book saved on your computer’s local hard drive and SIM or USIM card using the Mobile Broadband genie5. Add a Contact to Your

To sign up, you’ll need to have a Voipy Mobile SIM card, your own mobile phone handset or SIM-ready tablet or mobile broadband device?. You can order a Voipy Mobile SIM card from