Configuring SAP Fiori APPS - Quick Guide

(1)

Quick Guide

An example

transactional

Version 2014

Quick Guide

An example

transactional

Version 1.1 2014-05-12

Quick Guide

An example-based step

transactional SAP Fiori apps

Quick Guide

based step-by

SAP Fiori apps

by-step guide to enable the usage of

SAP Fiori apps

step guide to enable the usage of

(2)

Introduction

No part of this publication may be reproduced or transmitted in any form or for any purpose without the express permission of SAP AG. The information contained herein may be changed without prior notice.

proprietary software components of other software vendors. No part of this publication may be reproduced or transmitted in any form or for any purpose without the express permission of AG. The information contained herein may be changed without prior notice.

Some software products marketed by SAP AG and its distributors contain proprietary software components of other software vendors. National product specifications may vary.

SAP

services mentioned herein as well as their respective logos are trademarks or registered trademarks of SAP AG in Germany and other countries.

Please see http://www.sap.

additional trademark information and notices. Disclaimer

The content of this document is not part of SAP product documentation. the correctness of the information provided.

claims against SAP based on this information.

Introduction

No part of this publication may be reproduced or transmitted in any form or for any purpose without the express permission of SAP AG. The information contained herein may be changed without prior notice.

proprietary software components of other software vendors. No part of this publication may be reproduced or transmitted in any form or for any purpose without the express permission of AG. The information contained herein may be changed without prior notice.

SAP Landscape Transformation Replication Server installation SAP and other SAP products and services mentioned herein as well as their respective logos are trademarks or registered trademarks of SAP AG in Germany and other countries.

additional trademark information and notices. Disclaimer

No part of this publication may be reproduced or transmitted in any form or for any purpose without the express permission of SAP AG. The information contained herein may be changed without prior notice. Some software products marketed by SAP AG and its distributors contain proprietary software components of other software vendors. No part of this publication may be reproduced or transmitted in any form or for any purpose without the express permission of AG. The information contained herein may be changed without prior notice.

Landscape Transformation Replication Server installation SAP and other SAP products and services mentioned herein as well as their respective logos are trademarks or registered trademarks of SAP AG in Germany and other countries.

additional trademark information and notices.

No part of this publication may be reproduced or transmitted in any form or for any purpose without the express permission of SAP AG. The information contained herein may be changed

Some software products marketed by SAP AG and its distributors contain proprietary software components of other software vendors. No part of this publication may be reproduced or transmitted in any form or for any purpose without the express permission of AG. The information contained herein may be changed without prior notice.

Please see http://www.sap.com/corporate additional trademark information and notices.

com/corporate-en/legal/copyright/index.epx#trademark for additional trademark information and notices.

The content of this document is not part of SAP product documentation.

the correctness of the information provided.You may not infer any product documentation claims against SAP based on this information.

en/legal/copyright/index.epx#trademark for

The content of this document is not part of SAP product documentation.

u may not infer any product documentation No part of this publication may be reproduced or transmitted in any form or for any purpose without the express permission of SAP AG. The information contained herein may be changed

Landscape Transformation Replication Server installation SAP and other SAP products and services mentioned herein as well as their respective logos are trademarks or registered

The content of this document is not part of SAP product documentation.SAP does not guarantee u may not infer any product documentation No part of this publication may be reproduced or transmitted in any form or for any purpose without the express permission of SAP AG. The information contained herein may be changed

SAP does not guarantee u may not infer any product documentation No part of this publication may be reproduced or transmitted in any form or for any purpose without the express permission of SAP AG. The information contained herein may be changed

Some software products marketed by SAP AG and its distributors contain proprietary software components of other software vendors. No part of this publication may be reproduced or transmitted in any form or for any purpose without the express permission of SAP Some software products marketed by SAP AG and its distributors contain proprietary software

SAP does not guarantee u may not infer any product documentation

(3)

Introduction

This document guides you through the steps required to enable users to access transactional

The process is described using the example of the straight

The documentation

transactional SAP Fiori apps. The approach does not necessarily correspond to the system setup in a productive environment.

For SAP Fiori app implementation in a productive environment, see the

implementation information for SAP Fiori

Prerequisites

The following conditions must be met:

1 _{http://help.sap.com}

for SAP Business Suite 7 Innovations 2013 and Fact Sheets

2_{http://help.sap.com}

SAP Business Suite 7 Innovations 2013 Implementation Overview 3_{http://help.sap.com} 4_{http://help.sap.com} Gateway 2.0 Introduction

Introduction

This document guides you through the steps required to enable users to access transactional

The process is described using the example of the straight-forward

The documentation

transactional SAP Fiori apps. The approach does not necessarily correspond to the ystem setup in a productive environment.

Prerequisites

All required components are installed. For more information, see the following d

o o

o

Initial configuration of SAP information, see

HTTPS connectivity is enabled NetWeaver

Application Services (SAP HANA XS

In the ICM the fundamental ability of connecting to a system with HTTP(S) is activated.

In the ICF certain services can be activated, e.g. /sap/public/ping connection testing.

http://help.sap.com

for SAP Business Suite 7 Innovations 2013 and Fact Sheets

http://help.sap.com

SAP Business Suite 7 Innovations 2013 Implementation Overview

http://help.sap.com

SAP Smart Business

http://help.sap.com

Gateway 2.0

Introduction

This document guides you through the steps required to enable users to access transactional SAP Fiori apps in the SAP Fiori

The process is described using the example of the

forward path with several prerequisites already in place. The documentation is intended

Prerequisites

Implementation Overview

For transactional apps and fact sheets:

Information

For analytical apps: Initial configuration of SAP information, see

HTTPS connectivity is enabled NetWeaver Gateway

Application Services (SAP HANA XS

In the ICM the fundamental ability of connecting to a system with HTTP(S) is activated.

In the ICF certain services can be activated, e.g. /sap/public/ping connection testing.

http://help.sap.com

for SAP Business Suite 7 Innovations 2013

and Fact Sheets Central Implementation Information

http://help.sap.com SAP Business Suite SAP Business Suite 7 Innovations 2013 Implementation Overview

http://help.sap.com SAP Business Suite SAP Smart Business

http://help.sap.com SAP

Configuration and Deployment Information

This document guides you through the steps required to enable users to access SAP Fiori apps in the SAP Fiori

with several prerequisites already in place. is intended - to

Implementation Overview

For transactional apps and fact sheets:

Information

For analytical apps: Initial configuration of SAP

information, seeBasic Configuration Settings

HTTPS connectivity is enabled ateway and the back Application Services (SAP HANA XS

In the ICM the fundamental ability of connecting to a system with HTTP(S) is In the ICF certain services can be activated, e.g. /sap/public/ping

connection testing.

SAP Business Suite for SAP Business Suite 7 Innovations 2013

Central Implementation Information SAP Business Suite

SAP Business Suite 7 Innovations 2013 Implementation Overview

SAP Business Suite Administrator’s Guide SAP NetWeaver

This document guides you through the steps required to enable users to access SAP Fiori apps in the SAP Fiori

with several prerequisites already in place. to give you

implementation information for SAP Fiori1_{on the}

Implementation Overview2

For transactional apps and fact sheets: For analytical apps:Installation

Initial configuration of SAP NetWeaver

Basic Configuration Settings

HTTPS connectivity is enabled between

the back-end systems, including Application Services (SAP HANA XS).

SAP Business Suite SAP Fiori for SAP Business Suite for SAP Business Suite 7 Innovations 2013 SAP Fiori Apps

Central Implementation Information

SAP Business Suite SAP Fiori for SAP Business Suite SAP Business Suite 7 Innovations 2013 SAP Fiori Apps

SAP Business Suite SAP HANA Innovations for SAP Business Suite Administrator’s Guide

NetWeaver SAP

This document guides you through the steps required to enable users to access SAP Fiori apps in the SAP Fiori LLaunchpad

The process is described using the example of theMy Leave Requests

with several prerequisites already in place. give you an insight into

transactional SAP Fiori apps. The approach does not necessarily correspond to the For SAP Fiori app implementation in a productive environment, see the

on the SAP Help Portal.

All required components are installed.

For more information, see the following documentation on SAP Help For transactional apps and fact sheets:Central Implementation

Installation3

NetWeaver Gateway is in place. For more

Basic Configuration Settings4 between the front

end systems, including ).

SAP Fiori for SAP Business Suite SAP Fiori Apps

Central Implementation Information

SAP Fiori for SAP Business Suite SAP Fiori Apps – Overview

SAP HANA Innovations for SAP Business Suite Administrator’s Guide Installation

SAP NetWeaver Configuration and Deployment Information

This document guides you through the steps required to enable users to access Launchpad.

My Leave Requests

with several prerequisites already in place.

insight into the setup process for transactional SAP Fiori apps. The approach does not necessarily correspond to the For SAP Fiori app implementation in a productive environment, see the

Help Portal.

ocumentation on SAP Help

Central Implementation

Gateway is in place. For more the front-end server (FES)

end systems, including SAP HANA Extended In the ICM the fundamental ability of connecting to a system with HTTP(S) is In the ICF certain services can be activated, e.g. /sap/public/ping

SAP Fiori for SAP Business Suite SAP Fiori Apps – Overview

SAP Fiori for SAP Business Suite Overview SAP Fiori

SAP HANA Innovations for SAP Business Suite Installation

Gateway

Basic Configuration Settings

This document guides you through the steps required to enable users to access

My Leave Requestsapp. It follows a the setup process for transactional SAP Fiori apps. The approach does not necessarily correspond to the For SAP Fiori app implementation in a productive environment, see thecentral

Help Portal.

ocumentation on SAP Help Portal:

Gateway is in place. For more end server (FES) running

SAP HANA Extended In the ICM the fundamental ability of connecting to a system with HTTP(S) is In the ICF certain services can be activated, e.g. /sap/public/ping service for

SAP Fiori for SAP Business Suite SAP Fiori Overview Transactional Apps SAP Fiori for SAP Business Suite SAP Fiori for

SAP Fiori

SAP HANA Innovations for SAP Business Suite SAP NetWeaver Basic Configuration Settings

This document guides you through the steps required to enable users to access

app. It follows a the setup process for transactional SAP Fiori apps. The approach does not necessarily correspond to the

central

Portal:

running SAP SAP HANA Extended In the ICM the fundamental ability of connecting to a system with HTTP(S) is

service for

SAP Fiori Transactional Apps

SAP Fiori for SAP HANA Innovations for SAP Business Suite

NetWeaver Basic Configuration Settings

(5)

Out of Scope

Configuration Overview

The c one or multipl On the front NetWeaver On the back The LaunchpadLaunchpad content for the

The SAP Fiori Launchpad the

To

activated in SAP

authorizations for the services on on the

Th

and authorization steps Chapter

Fiori

At the end of the designer

Out of Scope

SAP Smart Business cockpits SAP Fiori fact s

Single sign

Authorizations in complex system landscapes

Back-configuration of the

or mapping of users to the corresponding ent

Back-Configuration Overview

The configuration of one or multipl On the front-NetWeaver UI Add On the

back-The SAP NetWeaverNetWeaver LaunchpadLaunchpad

content for the The SAP Fiori Launchpad and the FES.

To enable th activated in SAP

authorizations for the services on on the

back-The majority of

and authorization steps

Chapter 2 describes the initial configuration of the Fiori Launchpad

Activation of request h

Activation of the OData service

Creation of a PFCG role for administrators Launchpad

Creation of Launchpad At the end of the

esigner and

Out of Scope

SAP Smart Business cockpits SAP Fiori fact sheets

Single sign-on

-end configuration to enable the business functionality, for example, configuration of the

or mapping of users to the corresponding ent -end configuration required for the

Configuration Overview

onfiguration of SAP

one or multiple connected SAP Business Suite b -end server reside

UI Add-On.

-end servers, the SAP NetWeaverNetWeaver LaunchpadLaunchpad d

content for the SAP Fiori

The SAP Fiori LaunchpadLaunchpad and the Launchpad

these requests, UI5 applications and their activated in SAP NetWeaver

authorizations for the services on -end.

e majority of configuration and authorization steps

describes the initial configuration of the Launchpad designer:

Activation of the ICF services of the handlers for the

Activation of the OData service

Creation of a PFCG role for administrators Launchpad designer

reation of a PFCG role Launchpad

At the end of these one and the SAP Fiori

SAP Smart Business cockpits heets

end configuration to enable the business functionality, for example, configuration of the employee self

or mapping of users to the corresponding ent end configuration required for the

Configuration Overview

SAP Fiori app

e connected SAP Business Suite b end server resides an SAP

end servers, the SAP NetWeaverNetWeaver UI Add

designer, which

Fiori LaunchpadLaunchpad LaunchpadLaunchpad

Launchpad designer from a W se requests, UI5 applications and their

NetWeaver Gateway authorizations for the services on

configuration steps and authorization steps on both the front

describes the initial configuration of the designer:

the ICF services of the andlers for the Launchpad Activation of the OData service

Creation of a PFCG role for administrators esigner

PFCG role for end u

e one-time activities SAP Fiori Launchpad SAP Smart Business cockpits

end configuration to enable the business functionality, for example,

employee self-services in SAP Human Capital Management, or mapping of users to the corresponding ent

end configuration required for the

Fiori apps requires steps on e connected SAP Business Suite b

an SAP NetWeaver end servers, the SAP ERP or SAP

UI Add-On includes the SAP Fiori

, which is the administration tool to configure the LaunchpadLaunchpad

LaunchpadLaunchpad is the entry point for end users. designer from a W

se requests, UI5 applications and their ateway on FES

authorizations for the services on the front-end

steps are activation steps (for both the front-end s

describes the initial configuration of the the ICF services of the SAP Fiori

Launchpad URLs Activation of the OData services for the SAP Creation of a PFCG role for administrators

for end users with authorizations for the

time activities you can launch the Launchpad.

services in SAP Human Capital Management, or mapping of users to the corresponding entities in p

end configuration required for the specific Fiori

res steps on a

e connected SAP Business Suite back-end systems NetWeaver Gateway

SAP CRM systems are installed On includes the SAP Fiori

is the administration tool to configure the LaunchpadLaunchpad.

is the entry point for end users. designer from a Web brow

se requests, UI5 applications and their related

on FES. In addition, users need start

end and authorizations for related functions are activation steps (for

end server and in back describes the initial configuration of the SAP Fiori

SAP Fiori Launchpad URLs

for the SAP NetWeaver

Creation of a PFCG role for administrators with authorizations for the with authorizations for the

you can launch the

services in SAP Human Capital Management, ities in personal

specific Fiori app.

a front-end Server (FES) end systems.

Gateway system with systems are installed On includes the SAP Fiori

is the administration tool to configure the is the entry point for end users.

eb browser via secure r

related OData services need to be . In addition, users need start

and authorizations for related functions are activation steps (for applications and

and in back-end s SAP Fiori Launchpad

Launchpad to create the HTTP NetWeaver UI Add

with authorizations for the with authorizations for the

you can launch the SAP Fiori

services in SAP Human Capital Management, ersonal management

Server (FES) ystem with the

systems are installed, for example is the administration tool to configure the is the entry point for end users. They access

secure requests to OData services need to be . In addition, users need start

and authorizations for related functions cations and

end systems.

Launchpad and of the SAP create the HTTP

UI Add-On

with authorizations for the SAP Fiori with authorizations for the SAP Fiori

SAP Fiori Launchpad end configuration to enable the business functionality, for example,

services in SAP Human Capital Management, management.

Server (FES) and on the SAP , for example. is the administration tool to configure the

They access the equests to OData services need to be and authorizations for related functions

cations and services) ystems. of the SAP create the HTTP SAP Fiori Fiori Launchpad

services in SAP Human Capital Management,

(6)

Introduction

Chapter the

My Leave Request

role for the HCM e On

In addition

able to run the apps

Introduction

Chapter 3 describes how to configure individual theMy Leave Request

My Leave Request

role for the HCM e On Front-end

Activate NetWeaver Create a Launchpad

Add start authorizations for provide an

Assign the role to a user, which has to have the same user name as in th end system

Adapt the

In addition, the user must be assigned able to run the apps

Assign the RFC Auth end server to the b

Assign and generate the authorizations to call and perform the OData services on the

describes how to configure individual

My Leave Requests

My Leave Requests is included in the business catalog of apps available for the sample role for the HCM employee

end Server (FES)

ctivate the OData services NetWeaver Gateway.

reate a PFCG role

Launchpad. In our example, we start authorizations for

provide an unsecure shortcut: use wildcard authorization).

ssign the role to a user, which has to have the same user name as in th end system

dapt the business

the user must be assigned able to run the apps. You have to

ssign the RFC Auth end server to the b

ssign and generate the authorizations to call and perform the OData services on the back-end

sapp.

included in the business catalog of apps available for the sample mployee.

Server (FES) you have to OData services

Gateway. This enables the corresponding HTTP request h role that provides access

In our example, we start authorizations for

unsecure shortcut: use wildcard authorization).

ssign the role to a user, which has to have the same user name as in th business catalog to your needs in the

the user must be assigned

You have to do the following ssign the RFC Authorization to the user t end server to the back-end

ssign and generate the authorizations to call and perform the OData services end

included in the business catalog of apps available for the sample you have to do the following

OData services and ICF nodes for the

enables the corresponding HTTP request h that provides access

In our example, we copy the start authorizations for the required O

unsecure shortcut: use wildcard authorization).

ssign the role to a user, which has to have the same user name as in th catalog to your needs in the

the user must be assigned the authorizations do the following

orization to the user t end server

ssign and generate the authorizations to call and perform the OData services describes how to configure individual SAP Fiori apps using the example of

included in the business catalog of apps available for the sample do the following:

ICF nodes for the

enables the corresponding HTTP request h that provides access to the relevant

the sample

required OData service unsecure shortcut: use wildcard authorization).

ssign the role to a user, which has to have the same user name as in th catalog to your needs in the SAP Fiori

the authorizations do the following:

orization to the user to allow remote access from the f ssign and generate the authorizations to call and perform the OData services

SAP Fiori apps using the example of included in the business catalog of apps available for the sample

:

ICF nodes for the SAP UI5 applications enables the corresponding HTTP request h

relevant catalog in the

sample business role delivered by SAP. Data service to the business role unsecure shortcut: use wildcard authorization).

ssign the role to a user, which has to have the same user name as in th SAP Fiori Launchpad the authorizations required

o allow remote access from the f ssign and generate the authorizations to call and perform the OData services

UI5 applications enables the corresponding HTTP request handlers.

catalog in the

role delivered by SAP. to the business role unsecure shortcut: use wildcard authorization).

ssign the role to a user, which has to have the same user name as in th Launchpad d required in the back o allow remote access from the f ssign and generate the authorizations to call and perform the OData services

UI5 applications in SAP andlers.

SAP Fiori role delivered by SAP. to the business role (we ssign the role to a user, which has to have the same user name as in the

back-designer back-end to be o allow remote access from the front-ssign and generate the authorizations to call and perform the OData services

(7)

Process Steps

Step Preparation Create administrator user

Create test user

Activate OData services for SAP Fiori Launchpad

Activate

services for SAP Fiori Launchpad

Assign

administrator for SAP Fiori Launchpad adminstration user Assign Launchpad authorization for end users

Process Steps

Preparation Create administrator

Create test user

Activate OData services for SAP

Launchpad

Activate SICF services for SAP

Launchpad

Assign

administrator role for SAP Fiori Launchpad to adminstration

Assign role with Launchpad start authorization for end users

Process Steps

Back-End Server/ Front-End Server Other Front-End Server Front-End Server Initial Configuration on Front

services for SAP Front-End Server

role Front-End Server

start authorization for Front-End Server End Server/ End Server/ End Server End Server

Initial Configuration on Front-End Server (One End Server End Server End Server End Server End Server/ / Transaction SU01 SU01

End Server (One-Time Activities) /IWFND/M AINT_SERV ICE SICF PFCG PFCG

Transaction Data Required

User name as on the back User

Time Activities) /IWFND/M

AINT_SERV

Full list for both designer: Data Required

User name as on the back User name as on the back Time Activities) /UI2/PAGE_BUILDER_CONF /UI2/PAGE_BUILDER_PERS /UI2/PAGE_BUILDER_CUST /UI2/INTEROP /UI2/TRANSPORT Full list for both

designer: /default_host/sap/bc/ui2/nwbc /default_host/sap/bc/ui2/start_up /default_host/sap/bc/ui5_ui5/sap /ar_srvc_launch /default_host/sap/bc/ui5_ui5/sap /ar_srvc_news /default_host/sap/bc/ui5_ui5/sap /arsrvc_upb_admn /default_host/sap/bc/ui5_ui5/ui2/ ushell /default_host/sap/public/bc/ui2/d efault_host/sap/public/bc/ui5_ui5 SAP role: SAP_UI2_Admin_700 The activated names for: o /UI2/PAGE_BUILDER_CONF o /UI2/PAGE_BUILDER_PERS o /UI2/PAGE_BUILDER_CUST o /UI2/INTEROP o /UI2/TRANSPORT

SAP role: SAP_UI2_User_700 The activated

names for:

o /UI2/PAGE_BUILDER_PERS o /UI2/INTEROP

Data Required

User name as on the back name as on the back

/UI2/PAGE_BUILDER_CONF /UI2/PAGE_BUILDER_PERS /UI2/PAGE_BUILDER_CUST /UI2/INTEROP

/UI2/TRANSPORT Full list for both Launchpad

/default_host/sap/bc/ui2/nwbc /default_host/sap/bc/ui2/start_up /default_host/sap/bc/ui5_ui5/sap /ar_srvc_launch /default_host/sap/bc/ui5_ui5/sap /ar_srvc_news /default_host/sap/bc/ui5_ui5/sap /arsrvc_upb_admn /default_host/sap/bc/ui5_ui5/ui2/ /default_host/sap/public/bc/ui2/d _host/sap/public/bc/ui5_ui5 SAP role: SAP_UI2_Admin_700 The activated gateway

names for: /UI2/PAGE_BUILDER_CONF /UI2/PAGE_BUILDER_PERS /UI2/PAGE_BUILDER_CUST /UI2/INTEROP /UI2/TRANSPORT SAP role: SAP_UI2_User_700 The activated gateway

names for:

/UI2/PAGE_BUILDER_PERS /UI2/INTEROP

User name as on the back-end server name as on the back-end server

/UI2/PAGE_BUILDER_CONF /UI2/PAGE_BUILDER_PERS /UI2/PAGE_BUILDER_CUST Launchpad and /default_host/sap/bc/ui2/nwbc /default_host/sap/bc/ui2/start_up /default_host/sap/bc/ui5_ui5/sap /default_host/sap/bc/ui5_ui5/sap /default_host/sap/bc/ui5_ui5/sap /default_host/sap/bc/ui5_ui5/ui2/ /default_host/sap/public/bc/ui2/d _host/sap/public/bc/ui5_ui5 SAP role: SAP_UI2_Admin_700

gateway service /UI2/PAGE_BUILDER_CONF /UI2/PAGE_BUILDER_PERS /UI2/PAGE_BUILDER_CUST /UI2/INTEROP /UI2/TRANSPORT SAP role: SAP_UI2_User_700

gateway service /UI2/PAGE_BUILDER_PERS /UI2/INTEROP end server end server /default_host/sap/bc/ui2/nwbc /default_host/sap/bc/ui2/start_up /default_host/sap/bc/ui5_ui5/sap /default_host/sap/bc/ui5_ui5/sap /default_host/sap/bc/ui5_ui5/sap /default_host/sap/bc/ui5_ui5/ui2/ /default_host/sap/public/bc/ui2/d _host/sap/public/bc/ui5_ui5 /UI2/PAGE_BUILDER_CONF /UI2/PAGE_BUILDER_PERS /UI2/PAGE_BUILDER_CUST /UI2/PAGE_BUILDER_PERS

(8)

Introduction

Perform

checks:SAP Fiori Launchpad designer and SAP Fiori Launchpad App-Specific Configuration Open product documentation forMy Leave Requests Activities on Front Activate ICF services of UI5 application (SAP Fiori administrator) Activate OData services per app (SAP Fiori administrator) Copy t business role to create Launchpad catalog and g Add start authorizations for OData services of apps to role 5 _{http://help.sap.com} Application Help 6_{http://help.sap.com} Application Help Setting Up the 7_{http://help.sap.com}

Releases prior to SAP Business Suite 7 Innovations 2013 1.0 Leave Requests. Introduction Perform checks:SAP Fiori Launchpad designer and SAP

Launchpad Specific Configuration Open product documentation My Leave Requests app Activities on Front Activate ICF services of UI5 application (SAP administrator) Activate OData services per app (SAP Fiori administrator)

Copy template business role to create role with Launchpad

catalog and group

start authorizations for OData services of pps to business http://help.sap.com Application Help Launchpad http://help.sap.com Application Help Setting Up the http://help.sap.com

Releases prior to SAP Business Suite 7 Innovations 2013 1.0 SAP Fiori Apps for SAP ERP

Leave Requests.

checks:SAP Fiori

designer and SAP

Front-End Server

Specific Configuration

Public internet

Activities on Front-End Server

application (SAP

Front-End Server

services per app Front-End Server

roup Front-End Server authorizations for OData services of usiness Front-End Server http://help.sap.com

Application Help Administration Guide Designer

http://help.sap.com SAP

Application Help Administration Guide Setting Up the Launchpad

http://help.sap.com SAP Business Suite

Releases prior to SAP Business Suite 7 Innovations 2013

SAP Fiori Apps for SAP ERP Leave Requests. End Server internet End Server End Server End Server End Server End Server SAP NetWeaver Administration Guide Testing the SAP NetWeaver Administration Guide

Launchpad and Launchapd Designer SAP Business Suite

Releases prior to SAP Business Suite 7 Innovations 2013

SAP Fiori Apps for SAP ERP

Web browser Implementa tion Information for My Leave Requests SICF /IWFND /MAINT _SERVI CE SAP Fiori Launch pad designer PFCG PFCG

NetWeaver User Interface Add Administration Guide Content Administration

Testing the Launchpad

NetWeaver User Interface Add Administration Guide Content Administration

and Launchapd Designer

SAP Business Suite SAP Fiori for SAP Business Suite Releases prior to SAP Business Suite 7 Innovations 2013

My Leave Requests browser Implementa Information Requests7 /IWFND /MAINT _SERVI SAP Fiori Launch pad designer

User Interface Add Content Administration

Designer User Interface Add Content Administration and Launchapd Designer Testing the

SAP Fiori for SAP Business Suite

Releases prior to SAP Business Suite 7 Innovations 2013 SAP Fiori principal apps for SAP ERP

My Leave Requests Implementation Information for My

URL of Launchpad

Testing the

URL of Launchpad

Launchpad

UI5 application for the

Requests

HCM_LR_CRE

OData service for the

Requests

/SNCE/PO_S_SRV

Business catalog for the

Requests

SAP_HCM_BC_EMPLOYEE_X1

the business role related to the

Leave Requests

SAP_HCM_BCR_EMPLOYEE_X1

OData service for the

Requests

/GBHCM/LEAVEREQUEST (2)

User Interface Add-On for SAP Content Administration SAP Fiori User Interface Add-On for SAP Content Administration SAP Fiori

Testing the Launchpad SAP Fiori for SAP Business Suite

SAP Fiori principal apps for SAP ERP

Implementation Information for My

Launchpad designer, see

Testing the Launchpad

Launchpad, see

Launchpad6

UI5 application for the app:

HCM_LR_CRE

OData service for the app:

/SNCE/PO_S_SRV (1)

Business catalog for the app:

the business role related to the

Leave Requests app:

OData service for the app:

On for SAP NetWeaver SAP Fiori Launchpad On for SAP NetWeaver

SAP Fiori Launchpad Launchpad

SAP Fiori for SAP Business Suite SAP Fiori for SAP Fiori principal apps for SAP ERP

designer, see

Launchpad Designer

, seeTesting the

UI5 application for theMy Leave

OData service for theMy Leave

Business catalog for theMy Leave

the business role related to theMy

app:

OData service for theMy Leave

NetWeaver Launchpad NetWeaver

Launchpad SAP Fiori for SAP Fiori principal apps for SAP ERP

designer, see Designer5 Testing the My Leave My Leave My SAP_HCM_BCR_EMPLOYEE_X1

SAP Fiori for SAP Fiori principal apps for SAP ERP

(9)

Assign b

role to test user on front

server

Remove apps not required from catalog Perform check: SAP Fiori Launchpad app content Activities on Back Assign RFC authorization to test user Assign PFCG Role with OData Service Authorization to User Perform check: SAP Fiori Launchpad content and authorizations ssign business role to test user on front-end

erver

Remove apps not required from catalog Perform check: SAP Fiori Launchpad with app content Activities on Back Assign RFC authorization to user Assign PFCG Role with OData Service Authorization to Perform check: SAP Fiori Launchpad with content and authorizations Front-End Server

Remove apps not Front-End Server

Front-End Server

Activities on Back-End Server

Back-End Server

Assign PFCG Role Back-End Server

Front-End Server End Server End Server End Server End Server End Server End Server End Server PFCG SAP Fiori Launchpad designer SAP Fiori Launchpad SU01 PFCB SU01 SAP Fiori Launchpad

Test user on front

SAP Fiori Launchpad designer URL of customization mode Launchpad SAP Fiori Launchpad SAP Fiori Launchpad

Test user on front

URL of Launchpad customization mode

Launchpad Designer

authorizations S_RFCACL

back-end authorization role:

SAP_GBHCM_LEAVE_REQUEST_E MPL

Test user on front-end server

Launchpad designer customization mode, see

Designer

authorizations S_RFC S_RFCACL

end authorization role:

SAP_GBHCM_LEAVE_REQUEST_E end server

designer in

, seeTesting the

S_RFC and

end authorization role:

SAP_GBHCM_LEAVE_REQUEST_E

Testing the

(10)

1

1.1

If an administrator user is not yet available on the front one.

If you are using a trusted RFCC connection to the back be identical on the front

The adminis

S_DEVELOP, /UI2/CHIP, and S_CTS_SADM.

1.2

Create a test user in transaction SU01 server.

2

The SAP Fiori requires services

For more information, see the following documentation on SAP Help Portal under http://help.sap.com:

2.1

The section) are Launchpad SAP SAP Fiori

1 Preparation

Create Administrator User on Front

1.1

If an administrator user is not yet available on the front one.

If you are using a trusted RFCC connection to the back be identical on the front

The administration user needs

S_DEVELOP, /UI2/CHIP, and S_CTS_SADM. 1. Run transaction

2. Create a user (see above)

Create Test User on Front

1.2

Create a test user in transaction SU01 server.

2 Initial Configuration on Front

Time Activities)

The SAP Fiori requires the

services which provide the information about the configured app tiles to be displayed. For more information, see the following documentation on SAP Help Portal under http://help.sap.com:

SAP NetWeaver Especially: SAP Application Help

Launchpad

Activate OData Services for SAP Fior

2.1

The activation of the OData services and of the ICF services (described in the next section) are

Launchpad designer. SAP NetWeaver SAP Fiori Launchpad

Initial Configuration on

Front-Preparation

Create Administrator User on Front

If an administrator user is not yet available on the front If you are using a trusted RFCC connection to the back be identical on the front

tration user needs

S_DEVELOP, /UI2/CHIP, and S_CTS_SADM. Run transaction

Create a user – if applicable, (see above).

Create Test User on Front

Create a test user in transaction SU01

Initial Configuration on Front

Time Activities)

The SAP Fiori Launchpad the ICF nodes

which provide the information about the configured app tiles to be displayed. For more information, see the following documentation on SAP Help Portal under http://help.sap.com:

NetWeaver Especially: SAP Application Help

Launchpad

Activate OData Services for SAP Fior

activation of the OData services and of the ICF services (described in the next section) are required to initially set up the SAP Fiori

designer.

NetWeaver Gateway provides the infrastructure for the OData services used by the Launchpad and the SAP Fiori a

-End Server (One

Preparation

Create Administrator User on Front

If an administrator user is not yet available on the front If you are using a trusted RFCC connection to the back be identical on the front-end and on the back

tration user needs extensive authorizations, such as S_SERVICE, S_DEVELOP, /UI2/CHIP, and S_CTS_SADM.

Run transactionUser Maintenance

if applicable,

Create Test User on Front

Create a test user in transaction SU01

Initial Configuration on Front

Time Activities)

Launchpad uses the User interface a

that provide access to the web resources, and the

which provide the information about the configured app tiles to be displayed. For more information, see the following documentation on SAP Help Portal under

NetWeaver User Interface Add

Especially: SAP NetWeaver

Application Help Administration Guide

Activate OData Services for SAP Fior

activation of the OData services and of the ICF services (described in the next to initially set up the SAP Fiori

Gateway provides the infrastructure for the OData services used by the and the SAP Fiori a

ver (One-Time Activities)

Create Administrator User on Front

If an administrator user is not yet available on the front If you are using a trusted RFCC connection to the back

end and on the back

extensive authorizations, such as S_SERVICE, S_DEVELOP, /UI2/CHIP, and S_CTS_SADM.

User Maintenance(SU01) on the front if applicable, with the

Create Test User on Front-End Server

Create a test user in transaction SU01, using the same user

Initial Configuration on Front

uses the User interface a

User Interface Add

NetWeaver User Interface Add Administration Guide

Activate OData Services for SAP Fior

activation of the OData services and of the ICF services (described in the next to initially set up the SAP Fiori

Gateway provides the infrastructure for the OData services used by the and the SAP Fiori apps.

Time Activities)

Create Administrator User on

Front-If an administrator user is not yet available on the

front-If you are using a trusted RFCC connection to the back-end server, the user IDs need to end and on the back-end server.

extensive authorizations, such as S_SERVICE, S_DEVELOP, /UI2/CHIP, and S_CTS_SADM.

(SU01) on the front

with the ID the user already has in

End Server

using the same user

Initial Configuration on Front

uses the User interface add-on for SAP

User Interface Add-On for SAP

User Interface Add

Administration Guide Content Administration

Activate OData Services for SAP Fior

activation of the OData services and of the ICF services (described in the next to initially set up the SAP Fiori Launchpad

Gateway provides the infrastructure for the OData services used by the pps.

-End Server

-end server, you have to create end server, the user IDs need to end server.

extensive authorizations, such as S_SERVICE,

(SU01) on the front-end server. the user already has in

End Server

using the same user-ID as on the back

Initial Configuration on Front-End Server

on for SAP NetWeaver that provide access to the web resources, and the

On for SAP NetWeaver

User Interface Add-On for SAP

Content Administration

Activate OData Services for SAP Fiori Launchpad

activation of the OData services and of the ICF services (described in the next Launchpad and the SAP Fiori

Gateway provides the infrastructure for the OData services used by the

End Server

end server, you have to create end server, the user IDs need to extensive authorizations, such as S_SERVICE,

end server. the user already has in the back

ID as on the back

End Server

NetWeaver. It that provide access to the web resources, and the OData which provide the information about the configured app tiles to be displayed. For more information, see the following documentation on SAP Help Portal under

NetWeaver

or SAP NetWeaver Content Administration

Launchpad

activation of the OData services and of the ICF services (described in the next and the SAP Fiori

Gateway provides the infrastructure for the OData services used by the end server, you have to create end server, the user IDs need to extensive authorizations, such as S_SERVICE,

back-end

ID as on the back-end

(One-. It OData which provide the information about the configured app tiles to be displayed. For more information, see the following documentation on SAP Help Portal under

NetWeaver

SAP Fiori

activation of the OData services and of the ICF services (described in the next and the SAP Fiori

Gateway provides the infrastructure for the OData services used by the

SAP Fiori

(11)

An OData service has to be enabled in Gateway. This basically establishes a mapping betw

(identified by system alias, namespace, and the external service name).

An OData service has to be enabled in Gateway. This basically establishes a mapping between the technical

(identified by system alias, namespace, and the external service name). 1. Run transaction

the front

2. Use the system alias of your local system when activating the Note:

You do

not relevant for SAP Fiori.

The service names listed below are concatenations of the namespace /UI2/ and the technical names of the individual services. Ent

concatenations when adding new services in transaction /IWFND/MAINT_SERVICE. either /UI2/PAGE_BUILDER_CONF /UI2/PAGE_BUILDER_PERS /UI2/PAGE_BUILDER_CUST /UI2/INTEROP /UI2/TRANSPORT Result

The services are activated in your customer namespace technical names, for example

An OData service has to be enabled in Gateway. This basically establishes a mapping een the technical OData

(identified by system alias, namespace, and the external service name). Run transaction

the front-end server.

Use the system alias of your local system when activating the :

You do not need to activate the /UI2/ not relevant for SAP Fiori.

concatenations when adding new services in transaction /IWFND/MAINT_SERVICE.

either by namespace or by technical name. /UI2/PAGE_BUILDER_CONF /UI2/PAGE_BUILDER_PERS /UI2/PAGE_BUILDER_CUST /UI2/INTEROP /UI2/TRANSPORT Result:

ZINTEROP

ZPAGE_BUILDER_CONF ZPAGE_BUILDER_CUST ZPAGE_BUILDER_PERS ZTRANSPORT

An OData service has to be enabled in Gateway. This basically establishes a mapping OData service name

(identified by system alias, namespace, and the external service name). Run transactionActivate and maintain services

end server.

Use the system alias of your local system when activating the need to activate the /UI2/

concatenations when adding new services in transaction /IWFND/MAINT_SERVICE.

by namespace or by technical name. /UI2/PAGE_BUILDER_CONF

/UI2/PAGE_BUILDER_PERS /UI2/PAGE_BUILDER_CUST /UI2/INTEROP

/UI2/TRANSPORT

ZINTEROP

ZPAGE_BUILDER_CONF ZPAGE_BUILDER_CUST ZPAGE_BUILDER_PERS ZTRANSPORT

An OData service has to be enabled in Gateway. This basically establishes a mapping service name and the corresp

Activate and maintain services

Use the system alias of your local system when activating the need to activate the /UI2/

concatenations when adding new services in transaction

/IWFND/MAINT_SERVICE. When searching for services, you need to search by namespace or by technical name.

/UI2/PAGE_BUILDER_CONF /UI2/PAGE_BUILDER_PERS /UI2/PAGE_BUILDER_CUST

The services are activated in your customer namespace technical names, for example:

ZPAGE_BUILDER_CONF ZPAGE_BUILDER_CUST ZPAGE_BUILDER_PERS

An OData service has to be enabled in Gateway. This basically establishes a mapping and the corresp

Activate and maintain services(/IWFND/MAINT_SERVICE) on Use the system alias of your local system when activating the

need to activate the /UI2/LAUNCHPAD

When searching for services, you need to search by namespace or by technical name.

The services are activated in your customer namespace

An OData service has to be enabled in Gateway. This basically establishes a mapping and the corresponding back

(/IWFND/MAINT_SERVICE) on Use the system alias of your local system when activating the

LAUNCHPAD service. This service is The service names listed below are concatenations of the namespace /UI2/ and the technical names of the individual services. Enter these

When searching for services, you need to search

The services are activated in your customer namespace, with the following An OData service has to be enabled in Gateway. This basically establishes a mapping

onding back-end service (identified by system alias, namespace, and the external service name).

(/IWFND/MAINT_SERVICE) on Use the system alias of your local system when activating the following services:

service. This service is The service names listed below are concatenations of the namespace /UI2/

er these concatenations when adding new services in transaction

, with the following An OData service has to be enabled in Gateway. This basically establishes a mapping

end service (/IWFND/MAINT_SERVICE) on

following services: service. This service is The service names listed below are concatenations of the namespace /UI2/

, with the following The service names listed below are concatenations of the namespace /UI2/

(12)

Initial Configuration on Front Initial Configuration on Front

3. Call each service once by

services

areaICF Nodes

Note:

Initial Configuration on

Front-all each service once by

services(/IWFND/MAINT_SERVICE), then click

ICF Nodes.

:

You have called a service successfully when an XML document without any error messages.

When you call a service, a hash key is generated in the background. The hash key is required for the generation of authorization

Assign Administrator Role for SAP Fiori

You can verify the hash key generation in table USOBHASH in transaction

Data Browser

o R3TR in the o IWSG in the

o The technical service name in the

name of your generated service, typically starting with Z, and having the version number appended in four

The hash key should be displayed in t

-End Server (One

all each service once by select

(/IWFND/MAINT_SERVICE), then click Always select the

You can verify the hash key generation in table USOBHASH in transaction

Data Browser(SE16). In the selection screen, specify the following: R3TR in thePGMID

IWSG in theObject

The technical service name in the

End Server (One-Time Activities)

selecting it in transaction (/IWFND/MAINT_SERVICE), then click

Always select theOData

You can verify the hash key generation in table USOBHASH in transaction (SE16). In the selection screen, specify the following:

PGMID field

Object field

The technical service name in the

Time Activities)

in transaction (/IWFND/MAINT_SERVICE), then clicking

ODatanode, not

You have called a service successfully when an XML document

Assign Administrator Role for SAP Fiori Launchpad

The technical service name in the OBJ_NAME

name of your generated service, typically starting with Z, and having the version number appended in four-digit format with leading zeros The hash key should be displayed in theNAME

in transactionActivate and maintain

ingCall Browser

not theSDATA

You have called a service successfully when an XML document

Launchpad to Administration User

OBJ_NAME field. Use the technical name of your generated service, typically starting with Z, and having

digit format with leading zeros

NAMEcolumn of the results table.

Activate and maintain Call Browserin the screen

SDATA node.

You have called a service successfully when an XML document is displayed When you call a service, a hash key is generated in the background. The hash key is required for the generation of authorizations described

to Administration User

field. Use the technical name of your generated service, typically starting with Z, and having

digit format with leading zeros column of the results table.

Activate and maintain

in the screen is displayed When you call a service, a hash key is generated in the background. The

described under

to Administration User. You can verify the hash key generation in table USOBHASH in transaction

(SE16). In the selection screen, specify the following: field. Use the technical name of your generated service, typically starting with Z, and having

digit format with leading zeros column of the results table.

is displayed

.

(13)

2.2

1. 2.

Activate

2.2

Run transaction 2. Activate and selecting /default_host/sap/bc/ui2/nwbc /default_host/sap/ /default_host/sap/bc/ui5_ui5/sap/ar_srvc_launch /default_host/sap/bc/ui5_ui5/sap/ar_srvc_news /default_host/sap/bc/ui5_ui5/sap/arsrvc_upb_admn /default_host/sap/bc/ui5_ui5/ui2/ushell /default_host/sap/public/bc/ui2 /default_host/sap/public/bc/ui5_ui5

Activate SICF Services for SAP Fiori

Run transactionMaintain

Activate services under the following subtrees, and selectingActivate Service

/default_host/sap/bc/ui2/nwbc /default_host/sap/ /default_host/sap/bc/ui5_ui5/sap/ar_srvc_launch /default_host/sap/bc/ui5_ui5/sap/ar_srvc_news /default_host/sap/bc/ui5_ui5/sap/arsrvc_upb_admn /default_host/sap/bc/ui5_ui5/ui2/ushell /default_host/sap/public/bc/ui2 /default_host/sap/public/bc/ui5_ui5

ICF Services for SAP Fiori

Maintain Services

services under the following subtrees,

Activate Service, /default_host/sap/bc/ui2/nwbc /default_host/sap/bc/ui2/start_up /default_host/sap/bc/ui5_ui5/sap/ar_srvc_launch /default_host/sap/bc/ui5_ui5/sap/ar_srvc_news /default_host/sap/bc/ui5_ui5/sap/arsrvc_upb_admn /default_host/sap/bc/ui5_ui5/ui2/ushell /default_host/sap/public/bc/ui2 /default_host/sap/public/bc/ui5_ui5

ICF Services for SAP Fiori

Services(SICF) on the front services under the following subtrees,

, or selecting /default_host/sap/bc/ui2/nwbc bc/ui2/start_up /default_host/sap/bc/ui5_ui5/sap/ar_srvc_launch /default_host/sap/bc/ui5_ui5/sap/ar_srvc_news /default_host/sap/bc/ui5_ui5/sap/arsrvc_upb_admn /default_host/sap/bc/ui5_ui5/ui2/ushell /default_host/sap/public/bc/ui2 /default_host/sap/public/bc/ui5_ui5

ICF Services for SAP Fiori

In addition to the ICF services that correspond to the OData services it is necessary to (SICF) on the front

services under the following subtrees, either by right or selectingService/host /default_host/sap/bc/ui5_ui5/sap/ar_srvc_launch /default_host/sap/bc/ui5_ui5/sap/ar_srvc_news /default_host/sap/bc/ui5_ui5/sap/arsrvc_upb_admn /default_host/sap/bc/ui5_ui5/ui2/ushell /default_host/sap/public/bc/ui5_ui5

ICF Services for SAP Fiori Launchpad

In addition to the ICF services that correspond to the OData services it is necessary to (SICF) on the front-end server.

either by right-clicking the mouse

Service/host Activate

/default_host/sap/bc/ui5_ui5/sap/ar_srvc_launch /default_host/sap/bc/ui5_ui5/sap/ar_srvc_news /default_host/sap/bc/ui5_ui5/sap/arsrvc_upb_admn

Launchpad

In addition to the ICF services that correspond to the OData services it is necessary to end server.

clicking the mouse

Activatefrom the menu In addition to the ICF services that correspond to the OData services it is necessary to

clicking the mouse from the menu::

Configuring SAP Fiori APPS - Quick Guide

Quick Guide

An example

transactional

Quick Guide

An example

transactional

Quick Guide

An example-based step

transactional SAP Fiori apps

Quick Guide

based step-by

SAP Fiori apps

by-step guide to enable the usage of

SAP Fiori apps

step guide to enable the usage of

step guide to enable the usage of

step guide to enable the usage of

step guide to enable the usage of

Contents

Contents

Contents

Introduction

Prerequisites

Introduction

Prerequisites

Introduction

Prerequisites

Out of Scope

Configuration Overview

Out of Scope

Back-Configuration Overview

Out of Scope

Configuration Overview

Configuration Overview

Process Steps

Process Steps

Process Steps

1

1.1

1.2

2

2.1

1 Preparation

Create Administrator User on Front

1.1

Create Test User on Front

1.2

2 Initial Configuration on Front

Time Activities)

Activate OData Services for SAP Fior

2.1

Front-Preparation

Create Administrator User on Front

Create Test User on Front

Initial Configuration on Front

Time Activities)

Activate OData Services for SAP Fior

Preparation

Create Administrator User on Front

Create Test User on Front

Initial Configuration on Front

Time Activities)

Activate OData Services for SAP Fior

Create Administrator User on Front

Create Test User on Front-End Server

Initial Configuration on Front

Activate OData Services for SAP Fior

Create Administrator User on

End Server

Initial Configuration on Front

Activate OData Services for SAP Fior

-End Server

End Server

Initial Configuration on Front-End Server

Activate OData Services for SAP Fiori Launchpad

End Server

End Server

Launchpad

2.2