RODULFO
Cebu, Philippines
Occupation:
Motor Mechanic
AUGUST 22, 1974Civil Status: Married
TRADE QUALIFICATIONS:
AQF Certificate III in Automotive Mechanical Technology (Light Vehicle) VETASSESS – November 2013
EDUCATIONAL ATTAINMENT:
Tertiary: University of Cebu
Course: Marine Engineering (Incomplete) First Semester School year: 1993-1994
Vocational: College of Technological Science Cebu Formerly Cebu technical School
Course: Electronics Communication Technician March 23, 1993
Secondary: Cebu Technological University
Formerly: Cebu State College of Science and Technology College of Agriculture March 28, 1991
Primary:
Danglag Elementary School March 1987
TRINING AND SEMINARS ATTENDED:
Automotive Servicing
TECHNICAL EDUCATION AND SKILLS DEVELOPMENT AUTHORITY (TESDA) Archbishop Avenue, Lahug Cebu City, 6000 Philippines
Issued on October 25, 2012 and Valid Until October 25, 2017 Total Hours Training: Trade Test (588 hours)
1. 500311105 Participate in Workplace Communication 2. 500311106 Work in Team Environment
3. 500311107 Practice Career Professionalism
4. 500311107 Practice Occupational Health Safety Procedures 5. ALT723201 Apply appropriate Sealant/Adhesive
6. ALT723201 Move and Position Vehicle
7. ALT311202 Perform Mensuration and calculation
8. ALT723203 Read, Interpret and Apply Specifications and Manuals 9. ALT723204 Use and apply lubricant / coolant
10. ALT723205 Perform Shop Maintenance 11. ALT723301 Perform Diesel Engine Tune Up
12. ALT723303 Service Automotive Battery 13. ALT723304 Service Ignition System
14. ALT723305 Test and Repair Wiring/Lighting System
15. ALT723306 Perform Under chassis Preventive Maintenance 16. ALT723307 Service Starting System
17. ALT723308 Service Charging System
18. ALT723309 Service Engine Mechanical System 19. ALT723310 Service Clutch System
20. ALT723311 Service Differential and Front Axle 21. ALT723312 Service Steering System
22. ALT723313 Overhaul Manual Transmission 23. ALT723314 Service Brake System
24. ALT723315 Service Suspension System
Understanding the Value of Customer Enthusiasm (VCFCO.F6W) GM Middle East Operations
22 August 2012
Type of Training: Web Based Total Hours of Training: 1 hr
Introduction to LMS (LMS102.01W) GM Middle East Operations
16 August 2012
Type of Training: Web Based Total Hours of Training: 1 hr
Steering System Operation (03510.08W) GM Middle East Operations
13 August 2012
Type of training: Web Based Total Hours of Training: 1 hr
Base Suspension System Operation (03510.05W) GM Middle East Operations
12 June 2012
Type of Training: Web Based Total Hours of Training: 1 hr Tires and Wheels (13044.13T1) GM Middle East Operations 29 May 2012
Type of Training: Web Based Total Hours of Training: 1 hr Wheel Alignment (03510.01W) GM Middle East Operations
28 May 2012 Type of Training: Web Based Total Hours of Training: 1 hr
Global Diagnostic System (GDS) 2 / MDI (16048.30W-R2) GM Middle East Operations
4 April 2012
Type of Training: Web Based Total Hours of Training: 1 hrs Integrated Controls (A1801.24ME) GM Middle East Operations
31 May 2012
Type of Training: Instructor Based training Total Hours of Training: 24 hrs = 3 days Integrated Controls (A1801.16ME) GM Middle East Operations
03 June 2011
Type of Training: Web Based Total Hours of Training: 1
Engine Mechanical Diagnosis and Measurement 2 (16043.51W2) GM Middle East Operations
16 December 2010
Type of Training: Web Based Total Hours of Training: 3.5 hrs
Engine Mechanical Diagnosis and Measurement 1 (16043.51W1) GM Middle East Operations
16 December 2010
Type of Training: Web Based Total Hours of Training: 1 hr
J-38125 Terminal Repair Kit Structure & Usage (16043.51W1) GM Middle East Operations
16 December 2010
Type of Training: Web Based Total Hours of Training: 1 hr
J-38125 Terminal repair kit and Usage (18043.11T1) GM Middle East Operations
16 December 2010
Type of Training: Web Based Total Hours of Training: 1 hr
Electrical/Electronic System Diagnosis and DMM (18043.06S-R2) GM Middle East Operations
16 December 2010
Type of Training: Web Based Total Hours of Training: 1 hr
1.6L and 1.8L Engine Timing Procedure (50250.31T1) GM Middle East Operations
17 October 2010
Type of Training: Web Based Total Hours of Training: 1 hr Micrometer Basics (50240.11T2) GM Middle East Operations 04 August 2010
Type of Training: Web Based Total Hours of Training: 1 hr
MDI & Global Diagnostic System (A1002.24ME) GM Middle East Operations
22-24 July 2010
Type of Training: Instructor Based training Total Hours of Training: 24 hrs = 3 days
GM Difference Customer Enthusiasm (A1079.04ME) GM Middle East Operations
01 May 2010
Type of Training: Web Based Total Hours of Training: 1 hr
Electrical Diganosis (Part 2) (A1807.16ME) GM Middle East Operations
15-16 April 2010
Type of Training: Instructor Based training Total Hours of Training: 16 hrs = 2 days Electrical Diganosis (Part 1) (A1807.24ME) GM Middle East Operations
08-10 April 2010
Type of Training: Instructor Based training Total Hours of Training: 24 hrs =3 days GM Global Electrical Systems (18044.20W) GM Middle East Operations
05 April 2010
Type of Training: Web Based Total Hours of Training: 2 hrs
Brake Drum Measurement (50240.34T1) GM Middle East Operations
25 March 2010
Type of Training: Web Based Total Hours of Training: 1 hr
Global Diagnostic System (16048.26W) GM Middle East Operations
14 March 2010 Type of Training: Web Based
Total Hours of Training: 1 hr
Midtronics PSC 550 Battery Charger (50240.33T1) GM Middle East Operations
02 March 2010
Type of Training: Web Based Total Hours of Training: 1 hr
Tech 2 Familiarization (16048.16W-R2) GM Middle East Operations
26 February 2010
Type of Training: Web Based Total Hours of Training: 3 hrs Tech 2 (C1635.16ME)
GM Middle East Operations 27-28 January 2010
Type of Training: Instructor Based training Total Hours of Training: 16 hrs = 2 days
Electrical/Electronics Stage 3 (18043.03W-R3) GM Middle East Operations
01 October 2009
Type of Training: Web Based Total Hours of Training: 3 hrs
Electrical/Electronics Terminals and Connectors (18043.04S) GM Middle East Operations
29 September 2009
Type of Training: Web Based Total Hours of Training: 2 hrs
Electrical/Electronics Stage 2 (18043.02W-R4) GM Middle East Operations
28 September 2009
Type of Training: Web Based Total Hours of Training: 2 hrs
Electrical/Electronics Stage1 (18043.01W-R4) GM Middle East Operations
26 September 2009
Type of Training: Web Based Total Hours of Training: 2 hrs
Multiple Diagnostic Interface (MDI) Familiarization (16048.25W) GM Middle East Operations
22 September 2009
Type of Training: Web Based Total Hours of Training: 2 hrs
Maintenance – Under Car (00510.15W) GM Middle East Operations
19 September 2009
Type of Training: Web Based Total Hours of Training: 1 hr
Exhaust System and Service (06510.01W) GM Middle East Operations
19 September 2009
Type of Training: Web Based Total Hours of Training: 1 hr SI Overview (10041.10W-R2) GM Middle East Operations 19 September 2009
Type of Training: Web Based Total Hours of Training: 2 hrs
Maintenance Behind The Wheel (00510.10W) GM Middle East Operations
15 September 2009
Type of Training: Web Based Total Hours of Training: 1 hr
Maintenance – Underhood (00510.05W) GM Middle East Operations
15 September 2009
Type of Training: Web Based Total Hours of Training: 1 hr
Maintenance – Automotive Fluids (00510.01W-R2) GM Middle East Operations
13 September 2009
Type of Training: Web Based Total Hours of Training: 1 hr
Introduction to the GM LAAM LMS (LMS101.01W) GM Middle East Operations
7 July 2009
Type of Training: Web Based Total Hours of Training: 1 hr
Service Information (A1008.16ME) GM Middle East Operations
5 June 2009
Type of Training: Web Based Total Hours of Training: 1 hr
ESI and sources of Information (A1008.08ME) GM Middle East Operations
28 May2009
Type of Training: Instructor Based training Total Hours of Training: 8 hrs = 1 day
Delphi Micro 64 Connectors System Service (50250.14T1) GM Middle East Operations
28 May2009
Type of Training: Web Based Total Hours of Training: 1 hr
GM Difference Costumer Enthusiasm (A1079.04ME) GM Middle East Operations
28 May2009
Type of Training: Web Based Total Hours of Training: 1 hr
EMPLOYMENT HISTORY
Liberty Abu Dhabi Automobiles Co. U.A.E.
December 9, 2007 – Present Automotive Service Technician Working Hours per Week: 48 hrs
1. Troubleshoot Mechanical, Electrical and Engine related problems in GM Automobiles.
2. Diagnosis and repair in engine, brakes, suspension, steering gears, transfer case and differential.
3. Performed minor and major engine tune-up, inserted points cleaned and replace spark plug
4. Service tires and balance
5. Ability to work with advance tools and equipment
6. Complete preventive maintenance procedure on vehicle 7. Provide technical report for warranty documentation
8. Ensure all safety systems are in checked before performing any procedure.
9. Kept on manufacturer technical bulletins
10. Should have ability to establish and maintain relationship with others. 11. Maintained accurate hours & repair records
13. Conduct road test to the vehicle when required & referred to the repair test technician for Existing faults
AL JAZIRAH VEHICLES AGENCIES COMPANY Riyadh, Saudi Arabia.
April 14, 2004 – February 01, 2007 Automotive Service Technician Working Hours per Week: 48 hrs
14. Troubleshoot Mechanical, Electrical and Engine related problems in FORD automobiles.
15. Diagnosis and repair in engine, brakes, suspension, steering gears, transfer case and differential
16. Performed minor and major engine tune-up, inserted points cleaned and replace spark plug
17. Service tires and balance
18. Ability to work with advance tools and equipment
19. Complete preventive maintenance procedure on vehicle 20. Provide technical report for the warranty documentation
21. Ensure all safety systems are in checked before performing any procedure
22. For everyday problems- kept on manufacturer technical bulletins 23. Should have ability to establish and maintain relationship with others. 24. Maintained accurate hours & repair records.
25. Possess of technical and perform trouble shooting abilities.
AL JOMAIH AUTOMOTIVE CO. Jeddah Saudi Arabia
July 27, 1997 – May 27, 2003 Auto Mechanic
Working Hours per Week: 48 hrs
1. Troubleshoot Mechanical, Electrical and Engine related problems in GM automobiles
2. Diagnosis and repair in engine, brakes, suspension, steering gears and differential
3. Performed minor and major engine tune-up, inserted points cleaned and replace spark plug
4. Perform wheel alignment and service tires and wheel balancing. 5. Ability to work with advance tools and equipment
6. Complete preventive maintenance procedure on vehicle 7. Provide technical report for the warranty documentation.
8. Ensure all safety systems are in checked before performing any procedure.
9. Kept on manufacturer technical bulletins.
10. Should have ability to establish and maintain relationship with others. 11. Maintained accurate hours & repair records.
UP-TOWN INDUSTRIAL SALES Mandaluyong City Philippines July 16, 1995 – July 26, 1997 Garage Service Technician Working Hours per Week: 48 hrs
13. Repairs automotive equipment such as computerize wheel alignment and balancer, engine analyzer, tire change, timing light, air-condition recycling machine and battery charger for cars
14. Performs installation of vehicle lifters such as two post lift, four post lift, low-rise lift and scissors lift etc.
LICENSES: LIGHT WEIGHT VEHICLE (MANUAL & AUTOMATIC)
Occupational Title: Driving License (United Arab Emirates) License Number: 462117
Issued By: Ministry of Interior (Sharjah Police)
Occupational Title: Professional Driver’s License (Philippines)
License Number: G06-00-059168 Issued By: Land Transportation Office
Occupational Title: Driving License (Kingdom of Saudi Arabia) License Number: 2205801836
