3 Channel Long Play Digital Announcer

MOD (Mode) Selection DIP Switch (2 position): Select the PWM modulation frequency for dimmer channels set to the LED Curve.. 10V Dip Switch (1 position): Set this to OFF if

This message is displayed when entry of initial HEADING value is required with the status of [GYRO signal input setting]. Follow [Appendix C.5 Satellite menu, when JB/GYRO are used]

Set DIP-SW1-2 (Interface condition selection). If this DIP Switch is ON, communications settings are set via DIP Switches. If the DIP Switch is OFF, Memory Switches are used.

Maintains illuminance, dims and switches the dimming channel using optional single position retractive switch (switch 2).. Switches the switching channel using the optional single

For a complete list of titles available in the Penguin Young Readers series please write to your local Pearson Education office or contact:.. Penguin Readers

• Analog Voltage or Current Interface (Selected by Internal DIP Switch) • Analog Voltage or Current Interface (Selected by Internal DIP Switch) • Pulse or Alarm Input

notification that you are eligible eligible for an interim license, please for an interim license, please contact one of our four Regional contact one of our four Regional

Important Solar Benefits
Rising electric costs are avoided.
Solar costs less up front,