• No results found

Application of ductile iron in the manufacture of ploughshares

N/A
N/A
Protected

Academic year: 2020

Share "Application of ductile iron in the manufacture of ploughshares"

Copied!
6
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Table 1. Standardized ADI qualities according to EN and ASTM
Fig. 3. Schematic diagram of device with
Fig 6. Fixation of tested samples
Fig. 8. Wear of test specimens compared with original Kverneland pieces

References

Related documents

showed that both interventions significantly improved pain and function, but only a significant improvement in stiffness was found for KT [13]. Another case

Field experiments were conducted at Ebonyi State University Research Farm during 2009 and 2010 farming seasons to evaluate the effect of intercropping maize with

Materials and Methods: The specificity of the assay was tested using reference strains of vancomycin-resistant and susceptible enterococci.. In total, 193

LA – length of aedeagus (length of median lobe). LC – length of head. LCa – length of anterior body. LCo – length of body. LE – length of elytra. LO – length of eyes. LP

After successfully supporting the development of the wind power technology, an approach is needed to include the owners of wind turbines in the task of realizing other ways, other

19% serve a county. Fourteen per cent of the centers provide service for adjoining states in addition to the states in which they are located; usually these adjoining states have

In this paper, in order to provide robust forecasts for spot electricity prices, we propose a new approach based on the k -factor GIGARCH process, (Gué- gan, 2000), which allows

BCT: Behaviour Change Taxonomy; CBT: Cognitive behavioural therapy; cGy: Centigray (unit of absorbed radiation); CRF: Case report form; EORTC- QLQc30: European Organisation for