IPC-A-610D Training and Certification Programme (Revision D Training)
Certified Trainer Application Specialist
IPC J-STD-001D Training and Certification Programme (Revision D Training)
Certified Trainer
Application Specialist
IPC 7711/7721A Training and Certification Programme
Certified Trainer Application Specialist
IPC WHMA-A-620A Cable/Wire Harness Acceptability Certification Programme (New Revision A Training) Certified Trainer
Application Specialist
IPC 45C Lead Free Hand Soldering
A
DVANCEDR
EWORKT
ECHNOLOGYL
TDIPC Certification Centre
Hill Farm Church Lane Ford End ADVAN CE D REW OR K TECHN OL OGY LTD New Re vision A Trai ning
Page 1 Information on Advanced Rework Technology
Page 2-3 IPC-A- 610 Certified Trainer (Revision D)
Page 4-5 IPC-A- 610 Application Specialist (Revision D)
Page 6-8 J-STD- 001 Certified Trainer (Revision D)
Page 9 J-STD- 001 Application Specialist (Revision D)
Page 10 IPC 7711/7721 Certified Trainer
Page 11 IPC 7711/7721 Application Specialist
Page 12 IPC WHMA-A-620 Certified Trainer (Revision A)
Page 13 IPC WHMA-A-620 Application Specialist (Revision A)
Page 14 IPC-A-600G Application Specialist
Page 15 IPC 45C Lead Free Hand Soldering
Page 16 IPC VT– 42/43C Hand Soldering For Through-Hole
Components and Handling Procedures
Page 17 IPC VT- 54 Static Sensitive Components and
Handling Procedures
Page 18 IPC Course Booking Form
Page 19 Train The Trainer
Page 20 Practical Training Synopsis
Note: Fees for the IPC Certification Training are shown at the bottom of the
information sheets for each IPC Certification Training course.
A d v a n c e d R e w o r k T e c h n o l o g y L t d
Contents
A d v a n c e d R e w o r k T e c h n o l o g y L t d
Advanced Rework Technology
Training To Take You Into The Future
A d v a n c e d R e w o r k T e c h n o l o g y L t d
IPC Certification Centre
Advanced Rework Technology is a fully independent training organisation, which has been presenting
training courses for the past ten years. It is headed by Barry Morris, who has been involved in training for some twenty eight years. Our customer base includes many electronic companies around the world.
Training is carried out using the latest equipment for soldering and rework of printed circuit boards. As independent consultants, A.R.T. can offer unbiased advice regarding specialised rework equipment. A.R.T. provide in-house training which can be customised to meet the needs of your company.
A.R.T. have been approached by many companies regarding an international standard - we are happy to be able to offer companies the IPC training and certification programmes.
The IPC Certification programme and training is the most accepted and widely used specification for the
electronics industry. This training and certification will have immediate recognition and legitimacy throughout the electronics industry.
The IPC is a United States based trade association, which is dedicated to developing international standards for the electronic industries.
Training courses available for the IPC Certification programme:
IPC-A-610 Certified Trainer IPC-A-610 Application Specialist
J-STD-001 Certified Trainer J-STD-001 Application Specialist
IPC 7711/7721 Certified Trainer IPC 7711/7721 Application Specialist
IPC WHMA-A-620 Certified Trainer IPC WHMA-A-620 Application Specialist
IPC 45C Lead Free Hand Soldering
IPC VT 42/43C Hand Soldering For Through Hole Components IPC VT- 54 Static Sensitive Components & Handling Procedures IPC-A- 600 Acceptability of Printed Boards - Application Specialist Training
IPC-A-610 Certified Trainer
A d v a n c e d R e w o r k T e c h n o l o g y L t d
IPC Certification Centre
IPC-A-610 Certified Training Course Training Course Topics
• Role and responsibilities of trainers • Handling electronic assemblies
• Criteria for hardware installation - threaded fasteners, connector pins
• Soldering requirements for terminals and plated through holes, including lead free
• Surface mounted criteria for chip components, cylindrical components, leadless chip carriers, leaded components and ball grid arrays
• Requirements for component damage
• Criteria for laminate conditions, cleanliness and coatings
• Acceptance criteria for solderless wrap requirements and jumper wires • Requirements for high voltage applications
• Using the lesson plan and materials effectively, and a review of training skills Certification
On successful completion of the examination the student will receive the IPC-A-610 Trainer Certificate. This is valid for 2 years after the course completion date.
On successfully completing the course, the trainer will receive all the necessary training materials to carry out the Application Specialist courses.
This will include the following:
• A CD ROM which illustrates every aspect of the IPC-A-610 training and
documented information
• A trainer guide - this will provide complete directions for the Application Specialist training and test
• The IPC-A-610 revision D “Acceptability of Electronics Assemblies” • The IPC-T-50 “Terms and Definitions”
• The Application Specialist test and evaluation forms
Application Specialist materials, student manuals and course certificates can only be purchased by a Certified Trainer.
Phone: +44 (0)1245 237083 Hill Farm
A d v a n c e d R e w o r k T e c h n o l o g y L t d
610 CIT
A d v a n c e d R e w o r k T e c h n o l o g y L t d
IPC Certification Centre
How the Certification Programme Works
The IPC-A-610 training and certification programme has two tiers of instruction - Certified Trainers and Application Specialists.
Candidates are sent by their companies to receive five days of training in the IPC-A-610 document at an approved certification training centre.
Once they have completed the course, and have passed the examination, trainers are then qualified to train their company’s workers in the IPC-A-610 Application Specialist training programme.
This programme will greatly assist companies dedicated to ISO-9000 or other quality assurance initiatives. As the IPC specification is a widely accepted standard, this will have immediate recognition throughout the electronics industry.
Who should become a Certified Trainer
Any person who is responsible for quality and reliability of electronic assemblies :-
i.e. quality supervisors and engineering manufacturing supervisors with assembly responsibilities would all make excellent candidates for training.
Course Duration 5 Days
Costs
£1,600.00 per delegate, this includes all training materials as described on the previous pages.
Lunch is included in the course fees, but VAT should be added.
610 CIT
IPC-A-610 Application Specialist Training
A d v a n c e d R e w o r k Te c h n o l o g y L t d
Who should attend the Application Specialist Training?
This certification and training programme is designed for maintenance technicians, operators, process engineers, quality managers and anyone responsible for the quality and reliability of electronic assemblies.
Application Specialist Certification
The IPC 610 Application Specialist course is now modularised. Training on the entire syllabus is not required , however, the following Modules are mandatory:
Module 1 Introduction/IPC Professional Policies and Procedures Module 2 Foreword, Applicable Documents & Handling
The remaining Modules 3-9 are optional: Module 3 Hardware Installation
Module 4 Soldering (including High Voltage)
Module 5 Terminal Connections
Module 6 Through-Hole Technology (including Jumper Wires)
Module 7 Surface Mount Assemblies (including Jumper Wires)
Module 8 Component Damage and Printed Circuit Boards and Assemblies
Module 9 Solderless Wire Wrap
To attain certification, some of the above modules must be combined, i.e. If Module 6 is required, then Modules 4 and 8 must also be completed.
Phone: +44 (0)1245 237083 Hill Farm
A d v a n c e d R e w o r k T e c h n o l o g y L t d
610 CIS
A d v a n c e d R e w o r k T e c h n o l o g y L t d IPC Certification Centre
IPC-A-610 Application Specialist Training
A d v a n c e d R e w o r k T e c h n o l o g y L t d
IPC Certification Centre
Certification
Everyone who successfully completes the IPC-A-610 Application Specialist Training and examination will receive the IPC-A-610 Application Specialist Certificate. This certificate is valid for 2 years after the course completion date.
Course Duration: 3 Days if all modules are required
Otherwise duration varies according to the number of modules required
Course Costs : £200 per person per day
Lunch is included in the course fees, but V.A.T. should be added.
J-STD-001 Certified Trainer
A d v a n c e d R e w o r k T e c h n o l o g y L t d
IPC Certification Centre
Certification
On successful completion of the examination the student will receive the J-STD-001 Trainer Certification. This certificate is valid for 2 years after the course completion date. On successful completion of the course, the J-STD-001 Trainer will receive all the
necessary materials to carry out the Application Specialist training.
These will include the following:
• CD-ROM with visuals covering the J-STD-001 training
• A trainer guide for conducting the Application Specialist training modules • Copies of the J-STD-001 through 006 and a copy of the J-STD-001 Handbook
(IPC-HDBK-001) and IPC-9191 • Artwork of soldering test boards • IPC certification of course completion
Application Specialist training materials, student manuals and course certification can only be purchased by J-STD-001 Trainers.
Phone: +44 (0)1245 237083 Hill Farm
A d v a n c e d R e w o r k T e c h n o l o g y L t d
001 CIT
J-STD-001 Certified Trainer
A d v a n c e d R e w o r k T e c h n o l o g y L t d
IPC Certification Centre
Topics Covered
Instructional skills and the roles and responsibilities of the IPC Trainer.
General requirements, such as safety, tools and electrostatic discharge (ESD).
Wire and terminal assembly requirements, demonstrations and laboratory.
Through hole technology requirements, demonstrations and laboratory.
Surface mount technology requirements, demonstrations and laboratory.
General soldered connection acceptance requirements.
Test methods and related standards.
Use of statistical process control methodology.
J-STD-001 Certified Trainer
A d v a n c e d R e w o r k T e c h n o l o g y L t d
IPC Certification Centre
Who Should become a J-STD-001 Certified Trainer?
Assembly process engineers, quality assurance supervisors, training managers and any others responsible for the quality and reliability of soldered electronic assemblies would
make excellent candidates for the J-STD-001 Certified Trainer programme.
Course Duration: 5 Days
Costs
£1800.00 per delegate, this includes all training materials as described on the previous pages.
Lunch is included in the course fees, but VAT should be added.
Phone: +44 (0)1245 237083 Hill Farm A d v a n c e d R e w o r k T e c h n o l o g y L t d
001 CIT
Revision D Training Now AvailableJ-STD-001 Application Specialist Training
A d v a n c e d R e w o r k T e c h n o l o g y L t d
IPC Certification Centre
Application Specialist Certification
The Application Specialist course is “modularised” . This means that training on the entire syllabus is not required. Delegates must be trained on the Introductory section, and then may train on the other modules as required.
Everyone who successfully completes the J-STD-001 Application Specialist Training
and examination will receive a J-STD-001 Application Specialist certificate. This certificate is valid for 2 years after the course completion date.
Who should attend the Application Specialist Training?
Assembly operators, quality & inspection personnel, and others responsible for the quality and reliability of soldered electronics assemblies.
Course Duration: 1 day for Introduction plus 1 day for each additional module. J-STD-001 Application Specialist Training Modules
Module 1 Introduction
Module 2 Wires and Terminals
Module 3 Through Hole Technology
Module 4 Surface Mount Technology
Module 5 Inspection
Cost £250.00 per delegate per day, including student handbook and certificate. Lunch is included in the course fees, but VAT should be added.
001 CIS
IPC 7711/7721 Certified Trainer
A d v a n c e d R e w o r k T e c h n o l o g y L t d
IPC Certification Centre
The IPC 7711 Rework of Electronic Assemblies and the IPC 7721 Repair and Modification of Printed Board and Electronic Assemblies is a comprehensive
certification programme that provides electronics companies with a uniform method of training their staff to the requirements of the IPC 7711/7721.
WHO SHOULD BECOME A TRAINER? • Instructors/Trainers
• Management Personnel • Production Operators • Rework Operators
• Engineering and Manufacturing Supervisors WHAT A TRAINER RECEIVES:
Delegates successfully completing the IPC 7711/7721 Training Certification and examination will receive all the materials necessary for conducting Application Specialist training including:
• Copy of the IPC-7711 Rework of Electronic Assemblies & IPC-7721 Repair & Modification of PCBs and Electronic Assemblies
• A trainer manual providing complete direction for Application Specialist Training and Certification
• Student handbook
• Full set of colour visuals on CD-ROM
• The Application Specialist test and evaluation forms Trainers are certified for 2 years from course completion date. Course Duration: 5 Days
Cost £1800.00 per delegate - this includes all training materials. Lunch is included in the course fees, but VAT should be added.
Phone: +44 (0)1245 237083 Hill Farm
A d v a n c e d R e w o r k T e c h n o l o g y L t d
IPC 7711/7721 Application Specialist
A d v a n c e d R e w o r k T e c h n o l o g y L t d
IPC Certification Centre
The IPC-7711/7721 Application Specialist course is modularised . The course duration will depend on the skills and knowledge required by each individual delegate. Each
delegate will receive a Student Handbook and, upon satisfactory completion of the course, will receive IPC certification valid for 2 years.
EVALUATION:
Delegates will carry out practical rework and repair techniques to an acceptable level on example Printed Circuit Boards.
WHO SHOULD ATTEND THE APPLICATION SPECIALIST TRAINING?
• Process Engineers — Rework Operators — Production Staff — Quality Controllers Modules:
• Module 1 General Knowledge (Mandatory)
• Module 2 Wire Skills ( Optional)
• Module 3 Through-Hole Components Removal & Replacement (Optional)
• Module 4 SMT Components Removal/Replacement (Optional)
• Module 5 SOT and Gull Wing Removal/Replacement (Optional)
• Module 6 Leaded SMT QFPs & J-Leaded Components (Optional)
• Module 7 Printed Wiring Track Repair (Optional)
• Module 8 Printed Board Repair (Optional)
• Module 9 Coating Materials Conformal Coatings (Optional)
Cost £250.00 per delegate per day, including student handbook and certificate.
IPC/WHMA-A-620 Requirements and Acceptance for
Cable and Wire Harness Assemblies Trainer
Certification Training
A d v a n c e d R e w o r k T e c h n o l o g y L t d
IPC Certification Centre
Certification
The IPC-A-620 Trainer training is a comprehensive certification programme which covers the accept/reject criteria for Cable/Wires and Crimping etc.
The certification training course is available at Trainer level and is run on the same lines as the IPC-A-610 certification. Once the delegates have completed the course, the trainers will then be qualified to train their staff in the IPC 620 Application Specialist training. This certification training is a theoretical course designed to teach the correct understanding and interpretation of the 620 document.
WHO SHOULD BECOME AN TRAINER?
• Instructors/Trainers
• Management Personnel
• Quality Supervisors
• Engineering and Manufacturing Supervisor
What an Trainer receives:
• Copy of the IPC-620 Requirements & Acceptance for Cable & Wire Harness Assemblies
• Student handbook
• A Trainer manual providing complete direction for Application Specialist Training and Certification
• Full set of colour visuals on CD-ROM
• The Application Specialist test and evaluation forms
Trainers are certified for 2 years from course completion date. Course Duration: 5 Days
Course Costs: £1,600.00 per delegate - this includes all training materials. Lunch is included in the course fees, but V.A.T. should be added.
A d v a n c e d R e w o r k T e c h n o l o g y L t d
620A CIT
New Revision A Training
IPC /WHMA-A-620 Requirements and Acceptance for
Cable and Wire Harness Assemblies
Application Specialist Training
A d v a n c e d R e w o r k T e c h n o l o g y L t d
IPC Certification Centre
The IPC-A-620 Application Specialist training is modularised . The course duration will depend on the skills and knowledge required by each individual delegate. Each
delegate will receive, upon satisfactory completion of the course, an IPC certificate valid for 2 years.
WHO SHOULD ATTEND THE APPLICATION SPECIALIST TRAINING?
• Assembly Operators — Quality Controllers— Inspection Personnel and others responsible for the quality and reliability of Cable/Wire Assemblies
Modules:
• Module 1 Policies and Procedures, Forward, Preparation,
Cable Assemblies and Wires, Testing
• Module 2 Crimp Terminations, Insulation Displacement Connections
• Module 3 Soldered Terminals
• Module 4 Connectorization, Molding/Potting
• Module 5 Splices
• Module 6 Marking & Labeling, Wire Bundle Securing, Shielding
Cable/Wire Harness Protective Coverings
• Module 7 Coaxial & Twinaxial Cable Assemblies
• Module 8 Solderless Wrap
620A CIS
New Revision A Training
Everyone who successfully completes the IPC-A-620 Application Specialist Training and examination will receive the IPC-A-620 Application Specialist Certificate. This certificate is valid for 2 years after the course completion date.
Course Duration: 4 Days if all modules are required
IPC-A-600 Acceptability of Printed Boards
A d v a n c e d R e w o r k T e c h n o l o g y L t d
IPC Certification Centre
IPC-A-600 Application Specialist
Who should Attend?
This course is targeted at Printed Board Manufacturers, Electronic Assembly Companies, OEMs and Material/Equipment Suppliers and anyone responsible for the quality of Printed Boards.
This Application Specialist training is a “Modularised” Course.
• Module 1 Introduction (Mandatory)
• Module 2 External Observable
• Module 3 Internal Observable
• Module 4 Flexible and Rigid-Flex Printed Wiring
Everyone attending the IPC 600 Application Specialist training will receive the following materials:
• 600 Application Specialist Student Handbook
• 600 Application Specialist Certificate
Quotation for the above modules on request.
Lunch will be included in the course fees, but VAT should be added.
Phone: +44 (0)1245 237083 Hill Farm
A d v a n c e d R e w o r k T e c h n o l o g y L t d
Lead Free Hand Soldering
A d v a n c e d R e w o r k T e c h n o l o g y L t d
IPC Certification Centre
IPC Lead Free Hand Soldering
This training is a practical and theoretical conversion course aimed at giving participants a better understanding of the differences between Leaded and Lead Free hand soldering techniques.
Who Should Attend The Lead Free Hand Soldering course. Assembly Operators
Objectives
1. Reason and importance of Lead Free Alloys
2. Materials
3. Soldering Procedures
4. Cleaning
5. Evaluation/Inspection
Upon satisfactory completion, participants will receive IPC certification.
Course Duration: 1 Day.
Costs
£200 per person per course.
IPC-45C
Hand Soldering For Through-Hole Components VT-42/43C
A d v a n c e d R e w o r k T e c h n o l o g y L t d
IPC Certification Centre
IPC Hand Soldering For Through-Hole Components VT- 42/43C Certification This training is a practical and theoretical course aimed at giving participants a
better understanding of hand soldering techniques for through hole components.
Who Should Attend The Hand Soldering course For Through - Hole Components. Assembly Operators Objectives 1. Preparation 2. Materials 3. Soldering Procedures 4. Cleaning 5. Workmanship Standards
Upon satisfactory completion, participants will receive IPC certification.
Course Duration: 2 Days.
Costs
£400 per person per course.
Lunch is included in the course fees, but VAT should be added.
Phone: +44 (0)1245 237083 Hill Farm
A d v a n c e d R e w o r k T e c h n o l o g y L t d
VT-42/43C
Static Sensitive Components & Handling Procedures
A d v a n c e d R e w o r k T e c h n o l o g y L t d
IPC Certification Centre
IPC VT- 54 Static Sensitive Components and Handling Procedures
Who should Attend
This course is targeted to production staff, operators, supervisors and anyone who comes in contact with static sensitive components.
Topics Covered
Electrostatic Discharge (ESD) and Electrical Overstress (EOS) damage prevention Typical static charge source and typical static voltage generation
Reason for using warning labels
Difference between antistatic materials and static shielding Acceptable antistatic workstation
Proper handling techniques of electronic assemblies
Delegates will receive IPC certification on satisfactory completion of this course.
Course Duration: 1 Day
Costs
£200 per person per course
Lunch is included in the course fees, but VAT should be added.
IPC Course Booking Form
A d v a n c e d R e w o r k T e c h n o l o g y L t d
IPC Certification Centre
Course Code (shown on top right corner of syllabus) Course Dates:
Your Purchase Order No:
Invoice to be sent to: Name: Company: Address: Post Code: Telephone No: Fax No:
Confirmation/Joining instruction to be sent to: Name: Company: Address: Post Code: Telephone No: Fax No: Please note the following:
Confirmation of Courses on receipt of Booking Form with Purchase Order Number. Note: Course fees charges will be those ruling on date of booking/confirming training. Lunch is included in the course fees, but VAT should be added.
Terms: Payment to be made strictly at least 7 days before course commencement.
A cancellation fee will be charged as follows : 50% on 7 days notice . 25% on 14 days or less notice from the start of the course.
Please send or fax completed booking form.
A.R.T. reserve the right to cancel or substitute course dates.
Train The Trainer
A d v a n c e d R e w o r k T e c h n o l o g y L t d
IPC Certification Centre
New Course
This course is designed for instructors, or delegates new to instructing. The aim of the course is to teach the skills of practical training and demonstration techniques.
Course Topics
Structuring and presenting talks.
Instructional
Techniques.
Coping
with
questions.
Practical
demonstrations.
Using correct terminology when giving talks.
Advantages of visual aids, cameras etc, for demonstrations.
All delegates will take an active part and will be expected to write and
present a short talk and give a practical demonstration during the
course.
Course Duration: 3 days
Course Synopsis
A d v a n c e d R e w o r k T e c h n o l o g y L t d
Phone: +44 (0)1245 237083 Hill Farm
A d v a n c e d R e w o r k T e c h n o l o g y L t d IPC Certification Centre
Advanced Rework Technology presents training courses for all types of soldering and rework for PCBs. Training is available at A.R.T.’s fully equipped training centre or on-site customised training.
Course C1 Rework of Surface Mounted Devices. Course C1a Inspection/Quality and Rework of SMDs. Course C1b Rework of High Pin Count Fine Pitch SMDs. Course C1bga Rework of Surface Mount Ball Grid Arrays.
Course C1lf Practical Rework & Hand Soldering for Lead Free Alloys.
These training courses are regularly updated to include the latest components and PCBs.
For Repair and Rework of Plated Through Hole Printed Circuit Boards and High Density, SMD and Multilayer PCB Repair Techniques.
See pages 10 & 11 on the IPC training information pack for IPC 7711/7721 training courses
Course C5 Hand Soldering Techniques.
This course is designed to teach soldering skills and the requirements of high reliability soldering, with emphasis on the IPC J-STD-001 standard for soldering.
Courses are from 1 to 4 days duration.
