FAN-T
A ventilation unit with casing equipped for forward blade centrifugal ventilators coupled with three-phase electric motors via belt/pulley transmission. FAN-T is available in 9 ventilator sizes: from 2,500 to 45,000 m³/h.
MODES OF OPERATION
The availability of the various electrical motor powers which can be combined with each ventilator and the appropriate selection of the pulley and belt dimensions enable configuration of FAN-T to work in the desired work point. To avoid vibration transmission to the air distribu-tion system, the ventilator is connected to the supply side with a specific vibradistribu-tion-proof joint and the ventilator/electric motor is connected to the base of the FAN-T with vibration-proof joints.
The use of AC three-phase electric motors enables management of FAN-T in various ways:
• Connection of the electrical power supply only ensures FAN-T works at the maximum available flow rate;
• Use of a regulator for phase cutoff (accessory RVT 6A or RVT 9A for electric power motors up to 4 kW) to change the rotation speed of the ventilator and therefore the air flow rate. Alternatively to the phase cutoff regulators, an inverter can be used.
STRUCTURE
FAN-T was created with extruded aluminium profiles and is available both in the 25 mm thick sandwich panels version, insulated with polyurethane foam, and the version with simple panelling. The panels are manufactured in Aluzinc , material that ensures high strength against corrosion and oxidation.
Specify when ordering:
- Operating point (flow and pressure)
- Position of the inspection side if different from the standard (see page 8)
®
CONFIGURATION FAN-T FROM 9/9 T 18/18
0 100 200 300 400 500 600 700 800 900 1000 0 1000 2000 3000 4000 5000 6000 7000 8000 Pr es su re [P a ] Air flow [m³/h] 0,75 kW 1,10 kW 1,50 kW 2,20 kW
NO ERP NO ERP NO ERP NO ERP
0 100 200 300 400 500 600 700 800 0 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 Pr e ss ur e [P a ] Air flow [m³/h] 0,75 kW NO ERP 1,10 kW NO ERP
FAN-T 10/10
0 100 200 300 400 500 600 700 800 0 2000 4000 6000 8000 10000 12000 14000 Pr e ssu re [P a] Air flow [m³/h] 1,10 kW 1,50 kW 2,20 kW 3,00 kW 4,00 kW
NO ERP NO ERP NO ERP NO ERP NO ERP
0 100 200 300 400 500 600 700 800 900 0 2000 4000 6000 8000 10000 12000 Pr e ss ur e [P a ] Air flow [m³/h] 0,75 kW 1,10 kW 1,50 kW 2,20 kW 3,00 kW
NO ERP NO ERP NO ERP NO ERP NO ERP
PERFORMANCES
The unit must be ducted properly: UTEK authorizes the use only according to its performance diagram shown into this catalogue
FAN-T 12/12
0 100 200 300 400 500 600 700 800 900 0 5000 10000 15000 20000 25000 30000 Pr e ssu re [P a] Air flow [m³/h] 3,00 kW 4,00 kW 5,50 kW 7,50 kW
NO ERP NO ERP NO ERP NO ERP
0 100 200 300 400 500 600 700 800 900 0 5000 10000 15000 20000 25000 Pr e ssu re [P a] Air flow [m³/h] 1,50 kW 2,20 kW 3,00 kW 4,00 kW 5,50 kW 7,50 kW
NO ERP NO ERP NO ERP NO ERP NO ERP NO ERP
0 100 200 300 400 500 600 700 0 5000 10000 15000 20000 25000 30000 35000 40000 Pr e ss u re [ Pa ] Air flow [m³/h] 3,00 kW 4,00 kW 5,50 kW 7,50 kW 3,00 kW 4,00 kW 5,50 kW 7,50 kW 0 100 200 300 400 500 600 700 800 0 5000 10000 15000 20000 25000 30000 35000 Pr e ssu re [P a] Air flow [m³/h] 3,00 kW 4,00 kW 5,50 kW 7,50 kW 3,00 kW 4,00 kW 5,50 kW 7,50 kW PERFORMANCES
The unit must be ducted properly: UTEK authorizes the use only according to its performance diagram shown into this catalogue
FAN-T 630
FAN-T 560
0 100 200 300 400 500 600 700 800 900 0 10000 20000 30000 40000 50000 60000 Pr e ssu re [P a] Air flow [m³/h] 3,00 kW 4,00 kW 5,50 kW 7,50 kW 11 kW 15 kW
NO ERP NO ERP NO ERP NO ERP NO ERP NO ERP
ELECTRICAL DATA ENGINES 0,75 Kw RPM 3 3 1,1 Kw 3 1,5 Kw 3 2,2 Kw 3 3 Kw 3 4 Kw 3 5,5 Kw 3 7,5 Kw 11 Kw 15 Kw 400/230 400/230 400/230 400/230 400/230 400/230 690/400 690/400 400 690/400 1,81/3,15 A 2,82/4,91 A 3,47/6,01 A 4,82/8,38 A 6,49/11,29 A 8,1/14,09 A 6,62/11,42 A 8,6/14,83 A 21,3 A 16,1/27,8 A 3 3 50 Hz 50 Hz 50 Hz 50 Hz 50 Hz 50 Hz 50 Hz 50 Hz 50 Hz 50 Hz 1415 1410 1400 1430 1431 1440 1453 1455 1445 1470
DIMENSIONS (mm) WEIGHT (kg) UNIT FAN-T 9/9 L H P E Peso 600 FAN-T 10/10 600 FAN-T 12/12 700 FAN-T 15/15 950 FAN-T 18/18 950 600 600 700 950 950 800 800 900 1200 1200 A 262 289 341 404 478 B 298 331 395 470 557 216 248 275 300 367 41 56 75 111 160 C 151 134,5 152,5 240 196,5 D 122 63 84 246 105 UNIT FAN-T 500 L H P E Peso 1200 FAN-T 560 1300 FAN-T 630 1500 FAN-T 710 1600 1200 1300 1400 1600 1500 1600 1700 1800 A 640 720 800 900 B 640 720 800 900 440 470 500 600 200 235 260 320 C 280 290 350 350 D 120 110 100 100 P C A B D E H P 120 100 C B L A E D H
B
A
C
NOT A :
C = apertura pannello ispezione
C B C A B A DIMENSIONI ( in mm ) MODELLO A B C 7/7 500 700 700 9/9-10/10 600 800 800 12/12 700 900 900 15/15-18/18 950 12001200 MOD. A B C 500 600 700 950 700 800 900 1200 700 800 900 1200 FAN-T 7-7 FAN-T 9/9-10/10 FAN-T 12/12 FAN-T 15/15-18/18
INSTALLATION
(mm)
FAN-T INSTALLATION from 500 to 710 EXTRAORDINARY MAINTENANCE Minimum required space for maintenance
MOD. A B C 1200 1300 1400 1600 1500 1600 1700 1800 1300 1400 1530 1660 FAN-T 500 FAN-T 560 FAN-T 630 FAN-T 710 A B B C A C C B A
SPAZI MANUTENZIONE STRAORDINARIA : sostituzione ventilatore, ecc.
DIMENSIONI ( in mm ) MODELLO A B C 500 1200 1500 1300 560 1300 1600 1400 630 1400 1700 1530 710 1600 1800 1660
MOD. A B C 1200 1300 1400 1600 765 815 865 915 765 815 865 915 FAN-T 500 FAN-T 560 FAN-T 630 FAN-T 710
S PAZ I MANU T E NZ I ONE OR DI NAR I A : tens ionam ento cinghia, ecc.
DIMENSIONI ( in mm ) MODELLO A B C 500 1200 765 765 560 1300 815 815 630 1400 865 865 710 1600 915 915 C A B A B C C B A
AIR VENTILATION UNITS
Dear Customer
Thanks for your attention to the product UTEK , designed and manufactured to ensure the real values to the User : Quality, Safety and Savings on working.
UTEK S.r.l.
the Dealer
UTEK reserves the right to at any time the necessary changes to improve products without prior notice .
FAN-T_2016_1_EN