• No results found

Complex Permittivity Estimation for Each Layer in a BI-Layer Dielectric Material at Ku-Band Frequencies

N/A
N/A
Protected

Academic year: 2020

Share "Complex Permittivity Estimation for Each Layer in a BI-Layer Dielectric Material at Ku-Band Frequencies"

Copied!
8
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 1. Rectangular waveguide loaded with a bi-layer dielectric material.
Figure 2.Simulated and calculated6 Sij-parameters in a rectangular waveguide WR62 (L0 + L =.7 mm) loaded by Teflon with thickness L = 1.9 mm.
Table 1. Average complex permittivity and average relative error percentage on the real and imaginaryparts of the complex permittivity at Ku-band.
Figure 5. Complex permittivity of the mono-layers Teflon(1.9 mm), Delrin(2 mm) and FR4(1.5 mm)obtained from the Sij measured using the inverse procedure with Nelder-Mead algorithm.
+2

References

Related documents

B Differential gene expression analysis of ESRP 1 knockdown compared to resistant control cells using HTA 2.0 platform; downregulated genes in ESRP1 knockdown (left panel)

Head of Investor Relations Ovostar

For the experiments, the speaker independent isolated speech recognition system for Tamil language using various feature extraction and pattern matching techniques has been

Having gone through the process by which names are extracted from Yoruba proverbs, we may now focus our attention to the theoretical framework upon which we shall premise this

The significant increase in the average Hdry of the SOA films with an increase in ∆P is due to the transition of the dominant deposition process from adsorption to film entrainment

We propose that within the DehD active site, the NH group of Arg134 can form a hydrogen bond with the carboxylate of D -2-chloropropionate with a strength of » 4 kcal/mol that may

Optimization of a Hybrid Energy Storage System for Electric Optimization of a Hybrid Energy Storage System for Electric Vehicles Using Machine Learning Methods.. Vehicles

Greg Van Alstyne & Robert Logan | sLab | OCAD University Designing for