• No results found

Design, Static and Dynamic analysis of an All-Terrain Vehicle Chassis and Suspension System

N/A
N/A
Protected

Academic year: 2020

Share "Design, Static and Dynamic analysis of an All-Terrain Vehicle Chassis and Suspension System"

Copied!
9
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Fig. 1.5: Isometric View of Roll Cage               Fig.1.6: Top View of Roll Cage
Fig 3.0 Determination of Roll Center
Fig 3.5: camber angle vs. Roll angle Graph

References

Related documents

For the post processing of the compressed depth map, we utilize a weighted mode filtering (WMF), which was proposed to enhance the depth video obtained from

In the cognition, the sensory information perceived through sensory devices will store in short-term memory (working memory). The stored information contains relevant and

The denitrified e ffl uent from the intermediate tank flows into the activated carbon unit for the adsorption procedure to further remove the dissolved organics and by-produce from

Our analysis signifying an emergent geometric torsion curvature, underlying a vacuum created gravitational pair of (3 3 )-brane by a KR field quanta, appears to

Only both ADP- receptor antagonists together significantly reduced the LPA-induced platelet-monocyte aggregate formation (p<0.05), indicating that the concomitant stimulation

The objective of this trial is to determine whether a brief psychological treatment (the.. UBI) delivered by practitioners in primary care settings in New Zealand is effective

CardioBBEAT aims to reflect the impact of home tele- monitoring within an actual health care setting based on originally obtained cost data subdivided into cost of intervention, cost

Since the bucket teeth are frequently exposed to heavy wear, it needs an evaluation of wear properties in term of laboratory and field test to avoid costly downtime