• No results found

Design for two fluid fine nozzle with 50% fill ratio

N/A
N/A
Protected

Academic year: 2020

Share "Design for two fluid fine nozzle with 50% fill ratio"

Copied!
6
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 3.1: A can (a)when full, (b)during spraying, and (c)when empty of liquid, (N.Asmuin, 2011, 2014)
Table 3.1: Fill ratio for liquid and gas, (N.Asmuin, 2011, 2014).  Initial Can Final Can Available Notes
Figure 3.3: Schematic of set-up for atomiser testing, (N.Asmuin, 2011, 2014).
Table 3.2: The same volume flow rate of two fluids atomiser: (N.Asmuin, 2011, 2014).

References

Related documents

The purpose of this qualitative, case study is to explore the partnerships between parents/guardians and school districts when promoting college/ career readiness with regard

The formulated outlier detection as an optimization problem and proposed two practical, unsupervised, 1-parameter algorithms for detecting outliers in large-scale

f) the proposal to move to differentiated levels of TEF from year two? Please give reasons for your answer. Question 6: Do you agree with the proposed approach, including

Useful to inform you of numerous things, get to know eachother, and discuss aspects of life in the theory group.. You can all be found on

According to the Directory of Development Organizations, in 2011 a total of 107 development organisations operated in Syria, consisting of international organizations,

The analysis reported here demonstrates that RECQ helicase expression is deregulated in hematological malignancies compared to their normal counterparts in association with a

The 1910 statute created parole boards for each of the federal penitentiaries. Each board was composed of three members: the Superintendent of Prisons of the Department of Justice,

We clarify the crucial role of high-frequency bosonic exci- tations in doped fullerenes which reduce the bare bandwidth and the Coulomb repulsion allowing the intermediate