• No results found

Design Optimization of Electric Motor Frame and Its Study for Thermal, Dynamic and Modal Stability

N/A
N/A
Protected

Academic year: 2020

Share "Design Optimization of Electric Motor Frame and Its Study for Thermal, Dynamic and Modal Stability"

Copied!
9
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Fig -1: Shows the exsisting frame of 315L motor for 160 kW 4 pole motor
Fig -4: showing arrangement of winding in slot and its effective modeling
Fig-9  Relation between service speed and permissible residual unbalance.
Fig-11  Gives the loading point and boundary condition for dynamic load

References

Related documents

Indira Nooyi, CEO PepsiCo Madras Christian College The non‐IIT Faces Satya Nadela, CEO Microsoft Manipal Institute of Technology Rakesh Kapoor, CEO Reckitt Benckiser BITS

Similarly, inequality solutions are required to determine the monotonicity and concavity of functions by the use of derivative (Sandor 1997).. E-mail address:

 A multiplexer is also called data selector , since is selects one of many inputs and steers the binary information to the output line..  The AND gates and inverters

SVM classifiers were trained to discriminate bacterial protective antigens (BPAs) and non-BPAs in BPAD200+N+B+AF and receiver operator characteristic (ROC) curves generated from

Concur: The peer review process has been strengthened to ensure documentation of corrective action completion is included in the Peer Review Committee minutes. We recommended

Employers don’t expect perfection, so a typo in your cover letter isn’t sufficient reason for them to reject your

,” except for a decision of the Tribunal’s small claims division, and as to an interlocutory decision “under the same conditions and in the same manner as an interlocutory

Indian geothermal provinces have the capacity to produce 10,600 MW of power- a figure which is five time greater than the combined power being produced from non-conventional