• No results found

Sliding Wear Study on the Valve Seat Insert Contact

N/A
N/A
Protected

Academic year: 2020

Share "Sliding Wear Study on the Valve Seat Insert Contact"

Copied!
8
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 1. Simplified schematic diagram of High Frequency Friction Machine (1: Friction force transducer; 2: S.I
Table 2.  Test parameters.
Table 4. Average dimensions and wear volume for S.I. specimens.
Figure 7. Optical microscopy on seat insert face after experiments, (a) R.T. test, (b) 200˚C test

References

Related documents

Additionally, wound infiltration has been shown to be associated with a decrease in morphine consumption and signifi- cantly lower pain scores in the early postoperative period

In the scanning of pixels, the feature data are accumulated and labels are assigned to the runs, the multi-layer-index is updated in some spe- cial cases to keep the consistency,

Second, the decline in person-hours in the United States is associated with an increase in unemployment (column 5), while in Germany it is principally due to a reduction

As shown in (Fig.  3 ), at day 7 after osteogenic differentiation, the AM-MSCs and UC- MSCs showed similar BMP-6 and Runx2 mRNA levels, which were clearly higher than that in

mathematics, and technical ability. The best data scientists have a background with both information technology and social, biological, or medical science. As the

Subsea and satellite wells require another P&A treatment since the well configurations are different and they are not easily accessible by equipment placed

Based on the results of the study, for thicker slabs, the shear stiffness is higher and therefore the presence of shear lag is attenuated. It is clear that when the slab thickness is