View or Print Reports

(1)

User's Guide for the EnergyPro View or Print Reports •••• 1

View or Print Reports

Description of the Pre-formatted Reports Form within EnergyPro

The Reports form selection is used to preview or print various preformatted reports. The user can select the time period for which to generate a report.

Some of the reports available are defined below and a sample is attached:

⇒ Monthly Energy Report - The following monthly energy report contains the following information for each building and each HVAC unit within the building:

⇒ Alarm Report - The alarm report contains all the building and unit information and alarm data with the date and time the alarm was reported to the PC:

(2)

⇒ Building Setup Report - The building setup report contains all the data recorded during the building and unit setup in the Building Setup form.

⇒ Analog Channel Configuration Report - The analog unit setup report contains all the data recorded during the analog channel configuration and setup.

⇒ Digital Channel Configuration Report - The digital unit setup report contains all the data recorded during the digital channel configuration and setup.

⇒ Setpoint Schedule Report - The setpoint schedule report contains all the time / temperature setpoint schedules

downloaded from the HVAC Units and recorded in the database for each HVAC unit.

⇒ HVAC Unit Setup Report - The HVAC Unit setup report contains all the data recorded for each HVAC unit in the Unit Basics form.

⇒ HVAC System Monitor Report - The HVAC System Monitor report contains all the HVAC system status data downloaded from the HVAC Units and recorded in the database with corresponding date and time stamps.

⇒ Analog Channel Status Report - The Analog Channel Status report contains all the Analog data downloaded from the Analog units and recorded in the database with corresponding date and time stamps.

⇒ Digital Channel Status Report - The Digital Channel Status report contains all the Digital channel data downloaded from the Digital units and recorded in the database with corresponding date and time stamps.

⇒ HVAC System Status Report - The HVAC System Status report contains a detailed status of an individual HVAC system which includes control settings and alarm conditions. The downloaded data is recorded in the database with a corresponding date and time stamp.

⇒ Lighting Schedule Report - The lighting schedule report contains all the time / light schedules downloaded from the Lighting Units and recorded in the database for each Lighting unit.

(3)

July 21,2004 Report Date:

EMS2000 Monthly Energy Data Report

Report Date Range: July 2000 to July 2004 ^{Page 1}

Typical Convenience Store Building Name:

HVAC Unit Number

Cooling System Usage

Cooling Call Time Total Hours

Electric Usage kWh

Energy Recovery Savings %

Heating Call Time Total Hours

Electric Usage kWh

Energy Recovery Savings % Gas / Fuel Usage

Therms

Indoor Fan Run Time Total Hours

Electric Usage kWh

Heating System Usage Ventilation System Usage

May, 2001

Month: Cooling Degree Days:

Heating Degree Days:

121.00 560.00

1 11.92 44.09 92.31 183.60 679.32 0.00 0.00 306.93 368.32

2 395.80 1,464.46 33.60 0.00 0.00 0.00 0.00 520.88 625.06

Totals 407.72 1,508.55 183.60 679.32 0.00 827.82 993.38

HVAC Unit Number

Electric Usage kWh

Therms

Electric Usage kWh

June, 2001

471.00 18.00

1 88.70 328.19 25.93 2.60 9.62 0.00 0.00 176.97 212.36

2 588.18 2,176.28 24.99 0.00 0.00 0.00 0.00 685.18 822.22

Totals 676.88 2,504.47 2.60 9.62 0.00 862.15 1,034.58

HVAC Unit Number

Electric Usage kWh

Therms

Electric Usage kWh

July, 2001

388.00 29.00

1 54.45 201.47 10.47 0.00 0.00 0.00 0.00 54.95 65.94

2 601.45 2,225.37 15.54 0.00 0.00 0.00 0.00 682.02 818.42

Totals 655.90 2,426.83 0.00 0.00 0.00 736.97 884.36

(4)

Alarm Report

Date Printed: July 21, 2004

Building: GGS

1 Unit Number:

AlarmTime Description

ROOM TEMP HIGH 9/8/2000 5:55:51PM