• No results found

Effects of the Addition of Pistachio Shell Particles on the Properties of Polyurethane Matrix Composite

N/A
N/A
Protected

Academic year: 2020

Share "Effects of the Addition of Pistachio Shell Particles on the Properties of Polyurethane Matrix Composite"

Copied!
7
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Fig. 1  Relationship between the tensile strength and weight fraction of the polyurethane resin filled with pistachio shell particles at  a range of 2.5–12.5 wt%
Figure (2) illustrates the compression strength of the polyurethane matrix composite filled with pistachio shell particles
Fig. 5  Relationship between the water absorption and weight fraction of the polyurethane resin filled with pistachio shell particles at a range of 2.5–12.5 wt%

References

Related documents

To further explore the role of the PAH domains in meiotic repression, the mRNA levels of IME1 , SPS4 , and SPO13 were monitored in the wild-type, sin3 ⌬ , pah ⌬ 3 , and pah ⌬

Results: Serum copper and zinc were elevated in asthmatic children compared to controls with no relation to clinical manifestations or laboratory parameters .Serum lead

Another study that included patients with non-valvular persistent AF, but no other cardiovascular disease, reported that a low vitamin D level was associated with AF [16]..

A conventional accounting ap- proach, and a four-input translog cost function and as- sociated share equations are used to estimate total and partial factor productivities, own

Comprehensive plans and strategies of educational interventions which target both general public and the community pharmacists and strict implementation policies

Conclusion: Although it revealed the presence of low and excess birth weight, this study has shown that maternal anthropometry and dietary diversity score were

No study has established the quantitative estimate of the risk posed by consumption of street vended poultry in the informal settlements.. There is also no

Figure 6 below shows the graph for different values of network loss v/s the simulation run-time keeping the total number of nodes fixed at 3000..