2/4/8-Port USB DVI/HDMI/DisplayPort. Single/Dual Display Secure KVM Switch. User Manual
Full text
Related documents
The Front Panel buttons allow direct control over KVM switch operation and channel switching. Simply press the PC button for PC port switching. If binding is enabled between PC /
Brings the KVM, USB hub, and audio focus to the computer attached to the port corresponding to the specified Port ID.. Note: The KVM, USB hub, and audio focus all
O Online Registration iii OSD Functions 29 Hotkey 27 , 31 Logout 39 Main Screen 27 , 28 Main Screen Headings 28 Navigation 29 Overview 27 Password 27 P Password 27 Pause 38 Port
Brings the KVM or USB hub or audio focus to the computer attached to the corresponding port. [A] Invokes Auto Scan Mode... [←] Invokes Skip Mode and Skips from the current port to
Press and release a port selection switch to bring the KVM focus to the computer attached to its corresponding port.. The USB and Audio focus does not change – they stay with
Press and hold a port selection switch for more than 2 seconds to bring the KVM, USB, and Audio focus to the computer attached to its corresponding port.. Press and hold port
Press and hold a port selection switch for more than 2 seconds to bring the KVM, USB, and Audio focus to the computer attached to its corresponding port.. Press and hold
Use a USB type A-B Cable to connect the KVM’s USB port (type B, square connector) for the PC port used in the previous step, and the USB port on the computer (type A,