NETWORK USER S GUIDE. Multi-Protocol On-board Ethernet Print Server and Wireless Ethernet Print Server

• To configure the wireless network, either choose the wireless settings, or use Wi-Fi Protected Setup (WPS) to automatically set the Wi-Fi network name and turn on security.. •

Using WPS or AOSS™ from the control panel menu to configure your machine for a wireless network 3 If your wireless access point supports either Wi-Fi Protected Setup (PBC 1 ) or

If you are using Windows ® 2000, Mac OS ® X 10.2.4 or greater or your computer is connected to the wireless network using a network cable, it is recommended you temporarily

If your network uses a WPS-enabled wireless router or access point, you can quickly connect your scanner to the network using Wi-Fi Protected Setup (WPS)4. Note: To check if your

The DAP-1320 supports One-Touch AP configuration using the WPS (Wi-Fi Protected Setup) button to connect to a wireless router to extend the Wi-Fi network in your home, as well as

If you want to manually configure the wireless settings on your router click Manual Wireless Network Setup.. and refer to the

(For more information, see the Quick Setup Guide or Using WPS or AOSS™ from the control panel menu to configure your machine for a wireless network (Push Button Configuration) on

If your WLAN access point/router (A) supports either Wi-Fi Protected Setup (PBC 1 ) or AOSS™, you can configure the machine easily without knowing your wireless network settings