Training Program Worldwide 2016 Technical Training. August Global Training The finest automotive learning. Stand 08/2015 1

(1)

Training Program Worldwide 2016

Technical Training

August 2015

(2)

Stand 08/2015 2

TECHNICAL TRAINING

13

Bodywork 13

Chassis and Active Safety 17

Comfort/Convenience and Safety Systems 23

Diagnosis Engineering 27

Fundamentals 30

Maintenance 33

T1504F • Passenger Cars • Aluminum Welding • Work Sample 7 • Fly 13 T1505F • Passenger Cars • Aluminum Welding • Work Sample 8 • Fly 14

T1506F • Passenger Cars • Aluminum Welding • Work Sample 9 15

T1515F • smart • Soft Top Systems • Model Series 453 • Run 16

T1441E • Qualification Program • 2016 • Suspension System Technician • Initial Test • Go 17 T1488E • Vans • Qualification Program • 2016 • Drivetrain and Suspension System Technician • Initial Test •

Go 18

T1490F • Vans • Gasoline Engines • Function, Diagnosis and Repair • Go 19

T1491F • Vans • Transmission • Manual and Automatic Transmission, Differential and All-Wheel Drive •

Function, Diagnosis and Repair • Go 20

T1493F • Vans • On-Board Electrical System Management and Networking • Drivetrain and Suspension,

T1489F • Vans • Diesel Engines • Function, Diagnosis and Repair • Go 22

T1517F • Passenger Cars • Air Conditioning Systems and Auxiliary Heaters • Focus on the E-Class (W213) and

New Features on Other Model Series • Run 23

T1496F • Vans • Comfort and Climate Control Systems • Function, Operation and Diagnosis • Go 24

T1497F • Vans • Drive Authorization and Locking Systems • Function, Operation and Diagnosis • Go 25

T1501F • Vans • Comfort Systems and Telecommunications • Expert Training • Run 26

T1009Q • Passenger Cars • Qualification Program • Mercedes-Benz Certified Diagnostic Technician 27 T1428F • Trucks • Mercedes-Benz Certified Diagnosis Technician • Further Training 2016 (Model Series 93x) •

Fly 29

T1355E • Qualification Program • 2015, 2016 • Maintenance Technician • Final Test • Fly 30 T1443F • Trucks • Mercedes-Benz Product Technology Basics • Maintenance and Service • Go 31

T1444F • Electrical System • Fundamentals • Go 32

T1486F • Vans • Mercedes-Benz Product Technology • Maintenance and Service • Go 33 T1487E • Vans • Qualification Program • 2016 • Maintenance Technician • Initial Test • Go 34

(3)

Powertrain 36

Service Advisors and Workshop Manager 41

Telecommunications 42

Mercedes-Benz Roadside Assistance 49

T1488E • Vans • Qualification Program • 2016 • Drivetrain and Suspension System Technician • Initial Test •

Go 36

T1490F • Vans • Gasoline Engines • Function, Diagnosis and Repair • Go 37

T1491F • Vans • Transmission • Manual and Automatic Transmission, Differential and All-Wheel Drive •

T1493F • Vans • On-Board Electrical System Management and Networking • Drivetrain and Suspension,

T1489F • Vans • Diesel Engines • Function, Diagnosis and Repair • Go 40

T1502F • Vans • Drivetrain and Suspension • Tips and Tricks, Latest Features and Modifications, Exchange of

Experiences for Service Advisors • Go 41

T1516F • Passenger Cars • Telematics • E-Class Model Series 213 • Innovations • Run 42 T1347F • smart • On-Board Electrical System, Telematics and Innovations • Run 43

T1469F • Trucks • Telematics • FleetBoard • Fly 44

T1470F • Trucks • Telematics • Run 45

T1496F • Vans • Comfort and Climate Control Systems • Function, Operation and Diagnosis • Go 46

T1497F • Vans • Drive Authorization and Locking Systems • Function, Operation and Diagnosis • Go 47

T1501F • Vans • Comfort Systems and Telecommunications • Expert Training • Run 48

V0088P • Passenger Cars • Mercedes-Benz Roadside Assistance • Organization, Breakdown Case Processing and Customer-oriented Behavior at the Breakdown Location • Go 49

V0100E • Passenger Cars, Vans, Trucks • Roadside Assistance • Mercedes-Benz Roadside Assistance •

e-Training • Go 50

V0089P • Vans, Trucks • Mercedes-Benz Roadside Assistance • Organization, Breakdown Case Processing and Customer-oriented Behavior at the Breakdown Location • Go 51

T1086F • Trucks • Mercedes-Benz Roadside Assistance • Damage Diagnosis and Repair • Actros, Arocs, Atego Euro VI (Model Series 963, 964, 967) • Level 1 • Run 52

T1087F • Trucks • Mercedes-Benz Roadside Assistance • Damage Diagnosis and Repair • Supplementary Information for Major Assemblies and Special Vehicles • Run 53

(4)

Stand 08/2015 4

Fundamentals 54

Maintenance 82

T0177F • Passenger Cars • XENTRY Kit & Star Diagnosis • Level I • Go 54 T1158F • Passenger Cars • Overall Vehicle • Basic Knowledge for New Service Advisors without Technical

Qualification • Go 55

T0178F • Passenger Cars • XENTRY Kit & Star Diagnosis • Level II • Run 56

T0219F • Passenger Cars • Electrical System • Level I • Go 57

T0220F • Passenger Cars • Electrical System • Level II • Go 58

T0221F • Passenger Cars • Electrical System • Level III • Go 59

T0681E • Passenger Cars • Qualification Program • Maintenance Technicians • Initial Test • Go 60

T1316Q • Passenger Cars • Qualification Program • 2015, 2016 • Cross-System Competence for System

Technicians • Run 61

T1084E • Passenger Cars • Qualification Program • 2014, 2015, 2016 • Cross-System Competence for

System Technicians • Initial Test • Go 62

T1315E • Passenger Cars • Qualification Program • 2015, 2016 • Cross-System Competence for System

Technicians • Final Test • Go 63

V0131E • Passenger Cars, smart • Qualification Program • Technical Fundamentals for Non-Technical Job

Profiles • Initial Test 64

T0500F • smart • smart fortwo Introduction • Go 65

T1091E • smart • Qualification Program • 2014, 2015 • Cross-System Competence for smart Technicians •

Final Test • Go 66

T0165F • Vans • Vito and Viano Model Series 639 • Go 67

T0400F • Vans • Sprinter BR 906 • Training for Body Manufacturers • Run 68

T0223F • Trucks, Vans • Electrical System • Level II • Go 70

T0212F • Trucks, Vans • Mercedes-Benz Product Technology • Maintenance and Service • Go 71

T1057F • Trucks • Overall Vehicle • Actros, Antos, Arocs and Atego Euro VI (Model Series 963, 964, 967) •

Run 72

T0179F • Trucks, Vans • XENTRY Kit & Star Diagnosis • Level I • Go 73

T0180F • Trucks, Vans • XENTRY Kit & Star Diagnosis • Level II • Run 74

T0146F • Trucks • Actros Road Vehicle • Go 75

T0141F • Trucks • ZETROS Off-Road Trucks • Run 76

T0107E • Trucks • Overall Vehicle • The New Antos • e-Training • Go 77

T0422F • Trucks • Actros (BR 963) and Antos • On-Board Electrical System and System Networking for Body

Manufacturers • Run 78

T0945F • Trucks • Overall Vehicle • Econic Model Series 956 • Go 79

T0763F • Trucks • Econic Facelift • Market launch of Euro-VI standard and new engine type number • Run 80

T1058F • Trucks • Special-Purpose Vehicles • Heavy-Duty Truck Model Series 964 • Go 81

T0216F • Passenger Cars • Maintenance Service • Go 82 T1342Q • Passenger Cars • Qualification Program • 2015, 2016 • Maintenance Technician 83

T0694F • Passenger Cars • Maintenance Service • New types • New Features and Modifications • Run 84

T0213F • Passenger Cars • Mercedes-Benz Product Technology • Maintenance and Service • Go 85

T0500F • smart • smart fortwo Introduction • Go 86

(5)

On-board Electrical System, Bus System 88

Service Advisors and Workshop Manager 95

Diagnosis Engineering 101

T0004F • Passenger Cars, Trucks, Vans, smart • Diagnosis Strategy 1 • Go 88 T0514F • Passenger Cars • On-Board Electrical and Bus Systems • Run 89

T0788F • Passenger Cars • Wiring Harness Repair • Go 90

T0254F • Vans • Parameterizable Special Module (PSM) • Vito and Viano BR 639, Sprinter BR 906 • Run 91

T0445E • Passenger Cars • Fundamentals of SDconnect with On-Board Electrical and Bus Systems • e-Training

• Go 92

T0244F • Trucks • On-board Electrical Systems, System Networking, Instrumentation • Actros, Axor, Atego •

Run 93

T1028F • Trucks • System Networking and Instrumentation • Actros, Antos, Arocs, Atego Euro VI (Model

Series 963, 964, 967) • Run 94

T1026F • Trucks • Product Knowledge for Service Advisors • Run 95 T1025F • Trucks • Telematics • FleetBoard for Service Advisors • Internet Application • Run 96

T1082F • Trucks • Product Knowledge for Service Advisors • Powertrain and Suspension • Actros, Arocs, Atego Euro VI (Model Series 963, 964, 967) • Run 97

S0311E • Passenger Cars • Product Expertise • New Features and Modifications for NTG 5 • e-Training • Go98

S0403E • Passenger Cars • Product Expertise • New Features and Modifications for NTG 5.5 • e-Training • Go99

T0352F • Passenger Cars • Service Reception Interview with Focus on Technical Diagnosis • For Service Advisors and Workshop Managerial Staff • Run 100

T0005F • Passenger Cars, Trucks, Vans, smart • Mercedes-Benz Certified Diagnosis Technician • Diagnostic

Strategy 2 • Run 101

T0372Q • smart • Qualification Program 102

T1054Q • smart • Qualification Program • 2016 • Certified Diagnosis Technician 103

T0395F • smart • Certified Diagnosis Technician • Initial Test • Go 105

T1010F • smart • Certified Diagnosis Technician • Initial Test 106

T0396F • smart • Certified Diagnosis Technician • Electrical System • Run 107

T0003F • Passenger Cars • Mercedes-Benz Certified Diagnostic Technician • Initial test • Go 108

T0992F • smart • Certified Diagnosis Technician • Electrical Components, Comfort and Telematics • Run 109

T1012F • Passenger Cars • Mercedes-Benz Certified Diagnosis Technician • Initial Test • Go 110

T0397F • smart • Certified Diagnosis Technician • Drivetrain and Suspension • Run 111

T1401F • smart • Certified Diagnosis Technician • Drivetrain • Run 112

T0981F • Passenger Cars • Mercedes-Benz Certified Diagnosis Technician • Drivetrain • M276 DEH ST and

OM642 LS • Run 113

T0797F • smart • Certified Diagnostic Technician • Test preparation • Run 114

T0995F • smart • Certified Diagnostic Technician • Test • Run 115

T0398F • smart • Certified Diagnosis Technician • Test • Run 116

T0902F • smart • Certified Diagnosis Technician • Further training • Fly 117

T0944F • smart • Certified Diagnosis Technician • smart BR 453 • Further Training • Fly 118

(6)

Stand 08/2015 6

T0084E • Passenger Cars • Mercedes-Benz Certified Diagnosis Technician • Electrical System • e-Training •

Go 120

T1278F • Passenger Cars • Run 121

T1002F • Passenger Cars • Mercedes-Benz Certified Diagnosis Technician • Electrical Components, Comfort

and Telematics • Run 122

T0982F • Passenger Cars • Mercedes-Benz Certified Diagnosis Technician • Suspension • Run 123

T1015F • Passenger Cars • Mercedes-Benz Certified Diagnosis Technician • Test Preparation • Run 124

T1007F • Passenger Cars • Mercedes-Benz Certified Diagnosis Technician • S-Class Coupé (Model Series 217)

• Further Training • Fly 125

T1241F • Passenger Cars • Mercedes-Benz Certified Diagnosis Technician • E-Class Model Series 213 •

Further Training • Fly 126

T0983Q • Vans • Certification Program for Mercedes-Benz Diagnostic Technicians 127

T0986F • Vans • Mercedes-Benz Certified Diagnosis Technician • Initial Test • Go 129

T0018F • Vans • Mercedes-Benz Certified Diagnosis Technician • Electrical Components, Comfort and

Telematics • Run 131

T0987F • Vans • Mercedes-Benz Certified Diagnosis Technician • Electrical Components, Comfort and

T0019F • Vans • Mercedes-Benz Certified Diagnosis Technician • Drivetrain • Run 133

T0988F • Vans • Mercedes-Benz Certified Diagnosis Technician • Drivetrain • Run 134

T0020F • Vans • Mercedes-Benz Certified Diagnosis Technician • Suspension • Run 135

T0989F • Vans • Mercedes-Benz Certified Diagnosis Technician • Suspension • Run 136

T0021F • Vans • Mercedes-Benz Certified Diagnosis Technician • Test Preparation • Run 137

T0990F • Vans • Mercedes-Benz Certified Diagnostic Technician • Test preparation • Run 138

T0991F • Vans • Mercedes-Benz Certified Diagnostic Technician • Test • Run 139

T0023F • Vans • Mercedes-Benz Certified Diagnosis Technician • Further Training • Fly 140

(7)

Overall Vehicle 163

T0011F • Trucks • Mercedes-Benz Certified Diagnosis Technician • Initial Test • Go 144 T0110E • Trucks • Mercedes-Benz Certified Diagnostic Technician • Electrical System • e-Training • Go 145

T0028F • Trucks • Mercedes-Benz Certified Diagnostic Technician • Electrical Components, Comfort and

T0943F • Trucks • Mercedes-Benz Certified Diagnosis Technician • Electrical Components, Comfort,

T0109E • Trucks • Mercedes-Benz Certified Diagnostic Technician • Drivetrain • e-Training • Go 148

T0029F • Trucks • Mercedes-Benz Certified Diagnostic Technician • Drivetrain • Run 149

T0942F • Trucks • Mercedes-Benz Certified Diagnosis Technician • Drivetrain • Run 150

T0111E • Trucks • Mercedes-Benz Certified Diagnostic Technician • Chassis • e-Training • Go 151

T0030F • Trucks • Mercedes-Benz Certified Diagnostic Technician • Suspension • Run 152

T0941F • Trucks • Mercedes-Benz Certified Diagnosis Technician • Suspension • Run 153

T0013F • Trucks • Mercedes-Benz Certified Diagnostic Technician • Test Preparation • Run 154

T0014F • Trucks • Mercedes-Benz Certified Diagnostic Technician • Test • Run 155

T0016F • Trucks • Mercedes-Benz Certified Diagnostic Technician • Further Training • Fly 156

T0947F • Trucks • Mercedes-Benz Certified Diagnosis Technician • Fly 157

T0528F • Trucks • Mercedes-Benz Certified Diagnostic Technician • Actros Model Series 963 • Test

Preparation • Run 158

T0529F • Trucks • Mercedes-Benz Certified Diagnosis Technician • Actros Model Series 963 • Test • Run 159

T1154F • Trucks • Mercedes-Benz Certified Diagnosis Technician • Further Training 2015 (Model Series 93x) •

Fly 160

T1207F • Trucks • Mercedes-Benz Certified Diagnosis Technician • Further Training 2016 (Model Series 96x) •

Fly 161

T1038F • Trucks • Mercedes-Benz Certified Diagnosis Technician • Further Training • Fly 162

T1252Q • FUSO • Qualification Program • 2015, 2016 • Fuso Technician • Run 163 T0890E • Passenger Cars • System Technician • Knowledge Check • Go 164

T1423F • Passenger Cars, smart • Electrical System • High-Voltage Product Qualification for Newcomers • Go165

T1077F • Passenger Cars • Overall Vehicle • E-Class HYBRID Model Series 212 with OM651 (ECE) • Go 167

T1209E • Passenger Cars • Overall Vehicle • Driving Performance. Mercedes AMG World • e-Training • Go 168

T1247F • FUSO • Overall Vehicle • Canter TF • Welcome to Canter World • Go 169

T0780F • FUSO • Overall Vehicle • Canter TF BR 468 • Go 170

T0768F • FUSO • Diesel Engines • Engine Model Series 4P10, Euro 5/6 from Facelift TF1 • Run 171

T0509F • FUSO • Diesel Engines • Canter TD • Parameterization of the Engine Control Unit for Operations with Mercedes-Benz Diagnostic System (Star Diagnosis) • Run 172

T1248E • Trucks • Overall Vehicle • Actros, Antos, Arocs and Atego Euro VI (Model Series 963, 964, 967) •

T0389F • smart • Technology Star Diagnosis • Go 174

T1271F • Vans • Parameterizable Special Module • Model Series 447 V-Class and Vito • Run 175

T1039F • FUSO • Transmissions • Repair of DUONIC® transmission and system diagnoses • Run 176

(8)

Stand 08/2015 8

Powertrain 180

T0103E • Passenger Cars, Trucks, Vans, smart, FUSO • High-Voltage Systems in Motor Vehicles – Awareness •

T0001F • Passenger Cars, Trucks, Vans, smart, FUSO • High-Voltage Qualification for Motor Vehicles • Go 181

T1041E • Passenger Cars • Qualification Program • 2014, 2015, 2016 • Drivetrain System Technician • Initial

Test • Go 183

T1033Q • Passenger Cars • Qualification Program • 2014, 2015, 2016 • Drivetrain System Technician 184

T1085E • Passenger Cars • Qualification Program • 2014, 2015, 2016 • Drivetrain System Technician • Final

Test • Fly 185

T1386F • Passenger Cars • AMG Service Performance Initiative • Advanced • Fly 186

T0081E • Passenger Cars • Current CDI Engines • e-Training • Go 187

T0874E • Passenger Cars • Diesel Engines • OM607 • e-Training • Run 188

T1106F • Passenger Cars • Diesel Engines • OM626 • Diagnosis and Repair • Run 189

T1005F • Passenger Cars • Gasoline and diesel engines • Diagnosis and Repair • Run 190

T1080F • Passenger Cars • Gasoline and Diesel Engines • Innovations • Fly 191

T0841E • Passenger Cars • 6-/8-Cylinder Gasoline Engines • M276 and M278 • e-Training • Go 192

T0873E • Passenger Cars • 4-Cylinder Gasoline Engines • M270 and M274 • e-Training • Go 193

T1071F • Passenger Cars • Gasoline Engines • M177, M178, C63 and C450 AMG • Diagnosis and Repair •

Fly 194

T0489F • Passenger Cars • Gasoline Engines and Automatic Transmissions • M152, M157, M279 and 722.9 •

Diagnosis and Repair • Fly 195

T0773F • Passenger Cars • AMG Gasoline Engine • M133 • Run 196

T0078E • Passenger Cars • Powertrain C197 • Dual Clutch Transmission • e-Training • Run 197

T0888E • Passenger Cars • 9-Speed Automatic Transmission (725.0) • e-Training • Run 198

T1036F • Passenger Cars • 9-Speed Automatic Transmission (725.0) • Diagnosis and Repair • Run 199

T1006F • Passenger Cars • Automatic Transmissions and All-Wheel Drive • Diagnosis and Repair • Run 200

T1107F • Passenger Cars • Automatic Transmission • 700.4 • Diagnosis and Repair • Run 201

T0347F • Passenger Cars • Automatic and manual transmissions • Exchange of experience • Fly 202

T1001F • Passenger Cars • Manual Transmissions • Diagnosis and Repair • Run 203

T0503F • smart • smart fortwo • Drivetrain • Run 204

T0840F • smart • smart fortwo electric drive Model Series 451 • Go 205

(9)

Chassis and Active Safety 227

T1060Q • Trucks • Qualification Program • 2014 • Drive Train System Technicians 207 T0429F • Trucks • Gaseous Fuel Engines • Natural gas engine OM906 LAG • Run 208

T0294F • Trucks • Telligent® Engine Systems • Model Series 900, 457, 500 • Run 209

T1254F • Trucks • Parameterizable Special Module • Basic Parameterizations • Run 210

T0256F • Trucks • Parameterizable Special Module (PSM) • Run 211

T0430F • Trucks • Parameterization • Actros Model Series 963 • Run 212

T1250F • Trucks • Parameterizable Special Module • Parameterizing Complex Bodies • Fly 213

T0101E • Trucks • New Star of Long-Distance Transport • Engine Management BR 471 • e-Training • Go 214

T0755F • Trucks • Engine Management • OM470, OM471 and OM936 • Run 215

T0754F • Trucks • Engine Management and Exhaust Aftertreatment • OM934, OM936, OM470, OM471 and

OM473 • Run 216

T1046F • Trucks • Gaseous Fuel Engines • Natural gas engine M 936 G in the Econic • Run 217

T0293F • Trucks • Mechanical Engine Components Repair • Model Series 900, 457, 500 • Run 218

T0269F • Trucks • Transmission Management • GS, EAS, Mercedes PowerShift • Run 219

T0266F • Trucks • Mercedes-Benz Range-Change Transmission • Run 220

T0778F • Trucks • Manual Gearshift Systems • The Actros for distribution and construction site transport and

the Atego Euro VI standard • Run 221

T0296F • Trucks • Transmission Management with Automated Shift • Actros Model Series 963 • Run 222

T1049F • Trucks • Transmission • G 140, G 141, G 211 • Repair • Run 223

T0189F • Trucks • Voith Retarder • Controls and Mechanical Components • Run 224

T0137F • Trucks • BlueTEC HYBRID • Atego • Go 225

T1081F • Trucks • Engines and Transmissions • New Features and Modifications • Actros, Arocs, Atego Euro

VI (Model Series 963, 964, 967) • Run 226

T0368Q • Passenger Cars • Qualification Program • 2014, 2015, 2016 • Suspension System Technician 227 T0679E • Passenger Cars • Qualification Program • 2014, 2015, 2016 • Suspension System Technician •

Initial Test • Go 228

T0839E • Passenger Cars • Qualification Program • 2014, 2015, 2016 • Suspension System Technician •

Final Test • Fly 229

T0076E • Passenger Cars • Brake Control and Active Driving Assistance Systems • e-Training • Run 230

T0344F • Passenger Cars • Brake Control and Active Driving Assistance Systems • Fundamentals, Diagnosis

and Repair • Run 231

T0342F • Passenger Cars • Brake Control, Suspension and Active Driving Assistance Systems • New features

and modifications • Run 232

T0258F • Passenger Cars • Suspension Systems • Fundamentals, Diagnosis and Repair • Run 233

T0307F • Passenger Cars, smart • Wheel Alignment • Run 234

T0142F • Trucks, Vans • Vehicle alignment • Go 235

T0152F • Trucks • Chassis Systems • ASA (Additional Steering Axle) and CLCS (Chassis Level Control System)

• Actros BR 963 • Run 236

T1043F • Trucks • Brake Systems • Air Brake Systems • Run 237

(10)

Stand 08/2015 10

Comfort/Convenience and Safety Systems 243

Telecommunications 257

T1300Q • Passenger Cars • Qualification Program • 2015/2016 • Comfort and Passive Safety • Run 243 T1291E • Passenger Cars • Qualification Program • 2015 • Comfort and Passive Safety System Technician •

Final Test • Run 244

T1156E • Passenger Cars • Qualification Program • 2015, 2016 • Comfort and Safety System Technician •

T1121F • Passenger Cars • Comfort and Climate Control Systems • C-Class Model Series 205 and S-Class

Coupé Model Series 217 • Innovations • Run 246

T1273E • Passenger Cars • Telematics • Comfort • Diagnosing Telematics and Comfort Systems • e-Training

• Run 247

T0819F • Passenger Cars • Air Conditioning Systems and Auxiliary Heaters • Emphasis on the S-Class

(W/V222), A-Class and B-Class (W176, W246) • Run 248

T0447F • Passenger Cars • Diagnosis of Comfort and Climate Control Systems • Fly 249

T0226F • Passenger Cars • Drive Authorization System FBS 3 • Key Programming • Run 250

T1124F • Passenger Cars • Comfort and Climate Control Systems • Drive Authorization Systems • Operation,

Diagnosis and Repair • Run 251

T1159F • Vans • Comfort and Climate Control Systems • V-Class and Vito (Model Series 447) • Run 252

T1051Q • Trucks • Qualification Program • 2014, 2015 • Comfort and Safety System Technician 253

T1053E • Trucks • Qualification Program • 2014 • Comfort and Safety System Technician • Final Test • Go254

T0239F • Trucks • Heating and Climate Control • Run 255

T0243F • Trucks • Drive Authorization and Locking Systems • Actros, Axor • Run 256

T1269F • Passenger Cars • Telematics • Operation and Function of Current Telecommunication Systems •

Run 257

T1157E • Passenger Cars • Qualification Program • 2015, 2016 • Telecommunications System Technician •

T1301Q • Passenger Cars • Qualification Program • 2015/2016 • Telecommunications • Run 259

T1292E • Passenger Cars • Qualification Program • 2015/2016 • Telecommunications System Technician •

Final Test • Run 260

T1273E • Passenger Cars • Telematics • Comfort • Diagnosing Telematics and Comfort Systems • e-Training

• Run 261

T0833E • Passenger Cars • Telecommunications Systems • e-Training • Go 262

T0822F • Passenger Cars • Telematics • Telecommunications Systems • Go 263

T0455F • Passenger Cars • Telematics • Diagnosis of the NTG 4.5 and Current Telematics Systems • Fly 264

T1391Q • Vans, Trucks • Qualification Program • 2015 • Telecommunications System Technician 265

T1017F • Trucks, Vans • Telematics • Run 266

T1023F • Trucks, Vans • Telematics • FleetBoard • Fly 267

(11)

Bodywork 269

T1161E • Passenger Cars • Qualification Program • Body Specialists • Initial Test • Go 269 T1308Q • Passenger Cars • Qualification Program • 2015, 2016 • Body Specialist • Run 270

T1305E • Passenger Cars • Qualification Program • 2015/2016 • Body Specialist • Final Test • Run 271

T1392E • Passenger Cars • Qualification Program • 2015 • Body Technician • Initial Test • Go 272

T1307Q • Passenger Cars • Qualification Program • 2015/2016 • Body Technician • Run 273

T1304E • Passenger Cars • Qualification Program • 2015/2016 • Body Technician • Final Test • Run 274

T1127F • Passenger Cars • Accident Repair • A-, B-, GLA- and CLA-Class (Model Series 176, 246, 167, 117) •

Run 275

T1276F • Passenger Cars • Accident Repair • C-Class (Model Series 205) • Run 276

T1303F • Passenger Cars • Accident Repair • E-Class Model Series 212 • Run 277

T1097F • Passenger Cars • Accident Repair • M and GL-Class Model Series 166 • Run 278

T0849F • Passenger Cars • Accident Repair • S-Class (W/V 222,W217) • Fly 279

T0450E • Passenger Cars • Fundamental Knowledge of Soft Top Systems • SL, SLK and E-Class

(R231/R172/A207) • e-Training • Go 280

T0449F • Passenger Cars • Repair and Adjustment Operations for Soft Top Systems • SL, SLK and E-Class

(R231, R172 and A207) • Run 281

T0458E • Passenger Cars • Fundamentals of Body Accident Repair • e-Training • Go 282

T0365F • Passenger Cars • Aluminum Welding 1 • Run 283

T0463F • Passenger Cars • Aluminum Welding 2 • Fly 284

T0513F • Passenger Cars • Aluminum Welding • Work Sample 1 • Fly 285

T0846F • Passenger Cars • Aluminum Welding • Further Training 1 • Fly 291

T1345F • Passenger Cars • Aluminum Welding • Further Training 2 • Fly 292

T1104F • Passenger Cars • Equipment • Interior and Exterior Equipment in the A-, B-, GLA- and CLA-Class

(Model Series 176, 246, 167, 117) • Run 293

T1128F • Passenger Cars • Equipment • Interior and Exterior • C-Class Model Series 204 and E-Class Model

Series 212 • Run 294

T1277F • Passenger Cars • Equipment • C-Class (Model Series 205) • Run 295

T1309F • Passenger Cars • Equipment • E-Class Model Series 212 • Run 296

T0851F • Passenger Cars • Interior and Exterior Equipment • S-Class Model Series W222, W217 • Fly 297

T0911F • Passenger Cars • Damage diagnosis • Accident repair • Run 298

T1000F • Passenger Cars • Joining Technology • Run 299

T1034F • Passenger Cars • Product Expertise for Service Advisors • Damage Diagnosis and Accident Repair •

Run 300

T0501F • smart • Soft Top Systems • Run 301

T1274F • Vans • Accident Repair and Equipment • V-Class and Vito Model Series 447 • Run 302

T0303F • Vans • Accident Repair • Sprinter and Vito/Viano • Run 303

(12)

Stand 08/2015 12

Paint 305

T1098F • Passenger Cars • Quality Post-Repair Refinishing • Mercedes-Benz-Specific Topics • Run 305 T0283F • Passenger Cars • Damage Diagnosis for Mercedes-Benz High-Quality Paint Repair • For Service

Advisors • Fly 306

T1034F • Passenger Cars • Product Expertise for Service Advisors • Damage Diagnosis and Accident Repair •

(13)

Department

Bodywork

Title T1504F • Passenger Cars • Aluminum Welding • Work Sample 7 • Fly

Course Number T1504F-AA

Target group Bodywork Specialist, Bodywork Technician

Objectives Successful 6-month proof of qualification for aluminum welding on Mercedes-Benz vehicles.

Contents Creation of aluminum welding samples as per ISO 9606-2 and Mercedes-Benz-specific standards.

Mandatory prerequisite T1345F • Passenger Cars • Aluminum Welding • Further Training 2 • Fly

This training/test has to be booked, before you are authorized to book the main training. You´ll find a detailed description about the training, using the training code.

Training Depth Fly Method Theorie 10%, Practice90% Note The participant must bring:

- His/her "welding test certificate" from further training course T1345F

- His/her complete protective clothing (welding mask, safety shoes, jacket or overalls), as it needs to be worn during the practical part of the course

- A materials package "QEV 111 AEYEGL TS Weld Specimen Material" for creating a work sample

Upon successful completion of the tests in the "Aluminum Welding Further Training Course 2" (T1345F), the participant will receive a certificate.

This certificate is valid for two years as long as the employee successfully participates in the prescribed training courses "Aluminum Welding Work Sample 7, 8 and 9 • Fly" every six months.

IMPORTANT! These work samples must be created personally in the welding institute in the presence of qualified examiners/trainers. No other type of creation is permitted. The training price includes all test fees.

Duration 2,0 days (per 8 hours)

(14)

Stand 08/2015 14

Department

Bodywork

Title T1505F • Passenger Cars • Aluminum Welding • Work Sample 8 • Fly

Objectives Successful 6-month proof of qualification for aluminum welding on Mercedes-Benz vehicles

Contents Creation of aluminum welding samples as per ISO 9606-2 and Mercedes-Benz-specific standards

Mandatory prerequisite T1504F • Passenger Cars • Aluminum Welding • Work Sample 7 • Fly

Training Depth Fly Method Theorie 10%, Practice90% Note The participant must bring:

This certificate is valid for two years as long as the employee successfully participates in the prescribed training courses "Aluminum Welding Work Sample 7, 8 and 9, • Fly" every six months.

(15)

Department

Bodywork

Title T1506F • Passenger Cars • Aluminum Welding • Work Sample 9

Objectives Successful 6-month proof of qualification for aluminum welding on Mercedes-Benz vehicles

Contents Creation of aluminum welding samples as per ISO 9606-2 and Mercedes-Benz-specific standards

Mandatory prerequisite T1505F • Passenger Cars • Aluminum Welding • Work Sample 8 • Fly

Training Depth Method Theorie 10%, Practice90% Note The participant must bring:

This certificate is valid for two years as long as the employee successfully participates in the prescribed training courses "Aluminum Welding Work Sample 7, 8 and 9 • Fly" every six months.

(16)

Stand 08/2015 16

Department

Bodywork

Title T1515F • smart • Soft Top Systems • Model Series 453 • Run

Course Number T1515F-AA Target group System Technician Objectives The participant can:

> Operate and maintain the soft top system on the model series 453 > Professionally perform a fault diagnosis

> Perform necessary repairs

Contents > Function mode and operation of the model 453 soft top system > Possible causes of faults

> Remedies and repairs

Training Depth Run Method Theorie 15%, Practice85% Duration 2,0 days (per 8 hours)

(17)

Department

Chassis and Active Safety

Title T1441E • Qualification Program • 2016 • Suspension System Technician • Initial Test • Go

Course Number T1441E-AA

Target group System Technician Driving Stability

Objectives > The participant's knowledge is determined for the competence areas > An individual training plan is created for the competence area

> The participant and supervisor are informed of the individual qualification path Contents Theoretical test covering the following subjects:

> Electronic air processing unit (EAPU) > Additional steering axle (ASA) > Chassis Level Control System (CLCS) > Electronic brake system (EBS)

Mandatory prerequisite T1267E • Trucks • Qualification Program • 2015 • Cross-System Competence for System Technicians • Final Test • Go

Training Depth Go Method Theorie 100%, Practice0% Note The test is part of the qualification program for Mercedes-Benz Suspension System

Technicians. Duration 0 hours

(18)

Stand 08/2015 18

Department

Chassis and Active Safety

Title T1488E • Vans • Qualification Program • 2016 • Drivetrain and Suspension System Technician • Initial Test • Go

Target group System Technician Powertrain, System Technician Driving Stability

Objectives Identification of knowledge deficits and support in developing a training plan for the Drivetrain and Suspension System Technician qualification program.

Contents This initial test is an online test designed to assess theoretical knowledge in the following fields:

> Diesel Engines > Gasoline Engines

> Automatic transmissions, manual transmissions, differential and all-wheel drive > Suspension and driving assistance systems

> On-board electrical system management and networking of drivetrain and suspension partial systems

Training Depth Go Method Theorie 100%, Practice0% Duration 0 hours

(19)

Department

Chassis and Active Safety

Title T1490F • Vans • Gasoline Engines • Function, Diagnosis and Repair • Go

Target group System Technician Powertrain, System Technician Driving Stability Objectives The participant can:

> Carry out testing and adjustment operations > Carry out diagnostic operations

> Initiate required remedial actions > Carry out professional repairs

> Describe the concept and purpose of a diagnostic strategy

> Implement his/her daily work in a more structured and targeted manner Contents Practical and group work focusing on gasoline engines, the design and function of:

> Mechanical engine components

> Sensors and actuators in the subsystems > Control unit networking

> Exhaust concept/exhaust treatment

> Fuel, injection and ignition system, e.g. air ducting, fuel high- and low-pressure system > Use of service literature and workshop test equipment

> Diagnostic work with effects and remedies > Diagnoses according to the level model

Training Depth Go Method Theorie 30%, Practice70% Duration 2,0 days (per 8 hours)

(20)

Stand 08/2015 20

Department

Chassis and Active Safety

Title T1491F • Vans • Transmission • Manual and Automatic Transmission, Differential and All-Wheel Drive • Function, Diagnosis and Repair • Go

> Describe the function of the transmissions > Perform test, adjustment and repair work

> Determine the wear of components and define their usability > Flash the control unit and perform SCN coding

> Implement his/her daily work in a more structured and targeted manner Contents Practical exercises and group work on van transmissions:

> Describe the design and function of transmissions > System diagnosis and repair

> Test, adjustment and repair work

> Disassembling the transmission, establishing findings, assembly and adjustment > Flashing the control unit

> SCN coding

> Diagnosis according to the level model

(21)

Department

Chassis and Active Safety

Title T1493F • Vans • On-Board Electrical System Management and Networking • Drivetrain and Suspension, Function, Diagnosis and Repair • Go

> Describe the design and new features of the on-board electrical systems and the current CAN technology and bus systems, and also describe their basic functions > Describe all variants of data transfer used in the van

> Perform testing and diagnostic work on the battery and alternator management system

> Apply the current category-specific diagnoses and diagnostic aids

> Describe special considerations for the on-board electrical system, the engine and suspension

> Implement his/her daily work in a more structured and targetedmanner Contents The contents cover practical and group work on:

> Overview of overall networking

> On-board electrical system architecture and control unit networking for the engine and suspension

> Networking of engine systems for the current diesel and gasoline engines > Automatic transmission, components of networking

> Assistance systems, components of networking

> Efficient use of networked Star Diagnosis and the DAS, HMS 990 and SD Media programs

> Basic approach to troubleshooting and diagnosis

> Getting started with diagnosis according to the level model

(22)

Stand 08/2015 22

Department

Chassis and Active Safety

Title T1489F • Vans • Diesel Engines • Function, Diagnosis and Repair • Go

> Implement his/her daily work in a more structured and targeted manner Contents The course covers practical and group work on design and function:

> Sensors and actuators in the subsystems

> Networking of the control units and on-board diagnosis > Exhaust concept/exhaust treatment

> Testing of injection systems and peripheral systems > Use of service literature and workshop test equipment > Diagnostic work with effects and remedies

> Key features of the individual engines > Diagnoses according to the level model

(23)

Department

Comfort/Convenience and Safety Systems

Title T1517F • Passenger Cars • Air Conditioning Systems and Auxiliary Heaters • Focus on the E-Class (W213) and New Features on Other Model Series • Run

Target group System Technician Comfort and Safety

Objectives > Describe the air conditioning systems (general review): proper service process using the air conditioning service device

> Describe the air conditioning system on model series 213: structure, function of air conditioning system installed at market launch

> Name the new features and modifications to the model series 213 air conditioning system in terms of structure, components and function

> Name the new features in the model series 222 air conditioning system in terms of structure, components and function

> Perform diagnosis operations on cooling components (evacuation, leak test, filling, pressure test) with the air conditioning service unit

> Properly diagnose the air conditioning system with XENTRY Diagnosis > Name the additional functions of climate control in hybrid vehicles > Describe the design and function of the auxiliary heating system

> Perform diagnosiss and testing on the auxiliary heating system with XENTRY Diagnosis Contents > Air conditioning systems (general review): proper service process using the air

conditioning service device

> Air conditioning in model series 213:

- Structure and function of the air conditioning system installed at market launch - New features and modification in terms of structure, components and function > Air conditioning in model series 222:

- New features in terms of structure, components and function

> Diagnosiss on cooling components (evacuation, leak test, filling, pressure test) with the air conditioning service unit

> Proper diagnosis on the air conditioning system with XENTRY Diagnosis > Overview of the additional functions of climate control in hybrid vehicles > Auxiliary heater:

- Provide a basic description of the design and function of - Diagnosiss and testing

(24)

Stand 08/2015 24

Department

Comfort/Convenience and Safety Systems

Title T1496F • Vans • Comfort and Climate Control Systems • Function, Operation and Di-agnosis • Go

Target group System Technician Comfort and Safety, System Technician Telecommunication Objectives The participant can describe the design and function of

> the heating and climate control > the current comfort systems

> Describe the integration of the individual components in the on-board electrical system

> Conduct proper diagnoses in the case of malfunctions > Describe the concept and purpose of a diagnostic strategy

> Implement his/her daily work in a more structured and targeted manner Contents The contents encompass practical and group work on the design and function of

> Heating and climate control

> Stationary heater and heater booster

> Seating in the V-Class: variants, function and operation > Restraint systems and airbags

> Diagnosis and repair work

> Diagnoses according to the level model

(25)

Department

Comfort/Convenience and Safety Systems

Title T1497F • Vans • Drive Authorization and Locking Systems • Function, Operation and Diagnosis • Go

Target group System Technician Comfort and Safety, System Technician Telecommunication Objectives The participant can:

> Describe the design and function of different drive authorization systems > Perform current repairs correctly and according to manufacturer specifications > Describe the integration of the individual components in the on-board electrical system

> Conduct proper diagnoses in the case of malfunctions > Describe the concept and purpose of a diagnostic strategy

> Implement his/her daily work in a more structured and targeted manner

Contents Course contents cover practical and group work on the function, operation and repair > Drive authorization systems, current variants in the van

> Locking systems, current variants in the van > Electrical sliding door and electrical liftgate > Power window and pop-out window > Anti-theft alarm system ATA > Diagnosis and repair work

> Diagnoses according to the level model

(26)

Stand 08/2015 26

Department

Comfort/Convenience and Safety Systems

Title T1501F • Vans • Comfort Systems and Telecommunications • Expert Training • Run

Target group System Technician Telecommunication, System Technician Comfort and Safety Objectives The participant can:

> Operate telephones, COMAND Audio15, voice control and LINGUATRONIC > Perform targeted diagnoses on the telematics systems with and without Star Diagnosis

> Set and program the components

> Explain MOST/CAN networking and state the advantages and disadvantages Contents > Networking of MOST and CAN

> Operation, design, function and diagnosis of telematics components > COMAND, VTG and NTG5

> Comfort telephony, Bluetooth telephony > Bluetooth

> LINGUATRONIC

> Dynamic route guidance

> Fixed telephone and cell phone installation > MediaNavigation Center

> DAB/DAB+

Mandatory prerequisite T1389E • Trucks, Vans • Go

(27)

Department

Diagnosis Engineering

Title T1009Q • Passenger Cars • Qualification Program • Mercedes-Benz Certified Diagnos-tic Technician

Course Number T1009Q-AA

Target group Diagnosis Technician

Objectives The participant qualifies as a Mercedes-Benz Certified Diagnostic Technician. Contents The certification program for Mercedes-Benz Certified Diagnostic Technicians for

passenger cars consists of individual training courses. The certification program begins with the initial test (T1012F • Passenger Cars • Mercedes-Benz Certified Diagnostic Technician • Initial Test • Go). It involves a practical and theoretical test concerning the strategic approach and transfer behavior during everyday business. Furthermore, it assesses theoretical knowledge on the topics of EWAnet, electrics, comfort, telematics, drivetrain and suspension. Once you have passed the initial test, you will receive an overview of the training courses to be booked before the final examination. If you do not pass the initial test, you will receive detailed information about the fields in which you are lacking the requisite knowledge. You may prepare for the next initial test through

workplace measures or by attending training sessions.

Once you have all the necessary qualifications, you can register for the final test (T1016 F • Passenger Cars • Mercedes-Benz Certified Diagnostic Technician • Test • Run). Following successful completion, you will receive a certificate as a Certified Diagnostic Technician.

The qualification program consists of the following individual training course and begins with the initial test.

Following the initial test you will receive a recommendation on which training course(s) you should book:

> T1012F-AA • Passenger Cars • Mercedes-Benz Certified Diagnosis Technician • Initial Test • Go

> T0005F-AA • Passenger Cars, Trucks, Vans, smart • Mercedes-Benz Certified Diagnosis Technician • Diagnostic Strategy 2 • Run

> T1002F-AA • Passenger Cars • Mercedes-Benz Certified Diagnosis Technician • Electrical Components, Comfort and Telematics • Run

> T0981F-AA • Passenger Cars • Mercedes-Benz Certified Diagnosis Technician • Drivetrain • M276 DEH ST and OM642 LS • Run

> T0982F-AA • Passenger Cars • Mercedes-Benz Certified Diagnosis Technician • Suspension • Run

> T1015F-AA • Passenger Cars • Mercedes-Benz Certified Diagnosis Technician • Test Preparation • Run

(28)

Stand 08/2015 28

Optional prerequisite Before signing up for the certification program, you should have good knowledge of systematic troubleshooting procedures and of the workshop systems, including Star Diagnosis. Good knowledge of the on-board electrical system and vehicle networking is also required.

You can obtain or refresh this knowledge by attending training courses in the four proficiencies (drive, suspension, comfort and telecommunications systems) from the system technician qualification program. Ideally, you will have successfully completed two System Technician qualification courses.

Training Depth Method Theorie 100% Duration 18,0 days (per 8 hours)

(29)

Department

Diagnosis Engineering

Title T1428F • Trucks • Mercedes-Benz Certified Diagnosis Technician • Further Training 2016 (Model Series 93x) • Fly

Target group Diagnosis Technician Objectives The participant can:

> Ask the customer questions that are pertinent to the complaint > Develop a strategic plan for resolving the customer complaint > Make use of the necessary information sources (workshop literature)

Contents Information on current content will be sent to the diagnosis technician in a personal invitation letter.

Mandatory prerequisite T0014F • Trucks • Mercedes-Benz Certified Diagnostic Technician • Test • Run This training/test has to be booked, before you are authorized to book the main training. You´ll find a detailed description about the training, using the training code.

Training Depth Fly Method Theorie 20%, Practice80% Duration 2,0 days (per 8 hours)

(30)

Stand 08/2015 30

Department

Fundamentals

Title T1355E • Qualification Program • 2015, 2016 • Maintenance Technician • Final Test • Fly

Target group Maintenance Technician

Objectives The participant's knowledge in the competence areas is determined.

Contents This is an online test designed to assess basic theoretical knowledge in the following fields:

> Fundamentals of mechanical and electrical components

> Vehicle systems/functions of engine/mechanical and drive components > Work processes

> Mercedes-Benz service systems

Training Depth Fly Method Theorie 100%, Practice0%

Note The test is part of the qualification program for Mercedes-Benz Maintenance Technicians. Duration 0 hours

(31)

Department

Fundamentals

Title T1443F • Trucks • Mercedes-Benz Product Technology Basics • Maintenance and Ser-vice • Go

Target group Maintenance Technician Objectives The participant can:

> Name the various Mercedes-Benz trucks model series and assign the major assemblies and systems installed

> Name and operate the systems required for carrying out maintenance and repair work > Carry out the different maintenance work according to the maintenance procedures Contents > Overview of Mercedes-Benz truck models

> Innovations

> Vehicle documentation and vehicle data card > Design group overview and logic

> Symbols in the documentation

> Importance and use of the Specifications for Operating Fluids > Work units and operation texts

> Need for maintenance

> Design and function of maintenance systems > Electronic brake system (EBS)

Training Depth Go Method Theorie 60%, Practice40%

Note The practical section specifically addresses the design and the operation/function of the individual maintenance systems and items.

The content of this course is required for Maintenance Technicians to safely and effectively perform maintenance work on Mercedes-Benz trucks with the help of valid service information.

(32)

Stand 08/2015 32

Department

Fundamentals

Title T1444F • Electrical System • Fundamentals • Go

> Name the main basic electrical - variables and describe their relations

- Describe automotive components and their function

> Accurately apply current Mercedes-Benz test and measuring equipment, service literature and the Workshop Information System (WIS) for maintenance, diagnosis and repairs

> Carry out test, adjustment and repair work using digital multimeters, Star Diagnosis, including HMS990 Measurement Technology, oscilloscopes and the Diagnosis Assistance System (DAS) on electrical systems in commercial vehicles

> Describe the design and function of the various sensors and actuators and name and apply the corresponding measuring and testing options

> Reliably recognize and eliminate resistance issues and disconnections in electrical lines and connections

> Perform targeted troubleshooting on electrical and electronic components Contents > Conductivity of materials

> Voltage types - AC and DC voltage

> Basic electrical variables and formulas - Ohm's law

> Electricity hazards

> Circuit types and their properties > Terminal designations

> Measuring and testing - Oscilloscope - Fault types

> Sensors and actuators - Analog and digital sensors - Actuators

> Control and regulation > Pulse width modulation > Diagnosis and networking > Control units

> Conversion of analog signals to digital signals > Basic functions and types of data transfer

(33)

Department

Maintenance

Title T1486F • Vans • Mercedes-Benz Product Technology • Maintenance and Service • Go

> Name the various Mercedes-Benz van model series and assign the installed major assemblies and systems

> Name and operate the systems required for carrying out maintenance and repair work > Carry out the different maintenance work according to the maintenance procedures Contents > Overview of Mercedes-Benz van models

> Innovations

> Vehicle documentation and vehicle data card > Design group overview and logic

> Symbols in the documentation

> Importance and use of the Specifications for Operating Fluids > Work units and operation texts

> Need for maintenance

> Design and function of the ASSYST maintenance systems for vans > Driving assistance systems

> Operation of telematics components

Training Depth Go Method Theorie 50%, Practice50%

Note The practical section specifically addresses the design and the operation/function of the individual maintenance systems and items.

The content of this course is required for Maintenance Technicians to safely and effectively perform maintenance work on Mercedes-Benz vans with the help of valid service information.

(34)

Stand 08/2015 34

Department

Maintenance

Title T1487E • Vans • Qualification Program • 2016 • Maintenance Technician • Initial Test • Go

Objectives Identification of knowledge deficits and support in developing a training plan for the Maintenance Technician qualification program.

Contents The initial test is an online test designed to assess theoretical knowledge in the following fields:

> System knowledge of - WIS/ASRA

- Electronic Parts Catalog (EPC) > Star Diagnosis

> Mercedes-Benz product technology for vans, maintenance and service > Maintenance service, fundamentals

(35)

Department

Maintenance

Title T1507Q • Vans • Qualification Program • 2016 • Maintenance Technician

Course Number T1507Q-AA

Objectives The participant qualifies as a Maintenance Technician. Participants receive a certificate following completion of the qualification program.

Contents

The qualification program consists of the following individual training course and begins with the initial test.

Following the initial test you will receive a recommendation on which training course(s) you should book:

> T1507P-AA • Vans • Qualification Program • 2016 • Maintenance Technician • Competency Analysis

> P0019F-AA • Passenger Cars, Vans, Trucks • WIS/ASRA for Service and Parts • Go > T0179F-AA • Trucks, Vans • XENTRY Kit & Star Diagnosis • Level I • Go

> T1444F-AA • Electrical System • Fundamentals • Go

> T1486F-AA • Vans • Mercedes-Benz Product Technology • Maintenance and Service • Go

As soon as all your qualifications have been verified, you will receive your certificate.

Training Depth Method Theorie 100% Duration 9,0 days (per 8 hours)

(36)

Stand 08/2015 36

Department

Powertrain

Title T1488E • Vans • Qualification Program • 2016 • Drivetrain and Suspension System Technician • Initial Test • Go

Target group System Technician Powertrain, System Technician Driving Stability

Objectives Identification of knowledge deficits and support in developing a training plan for the Drivetrain and Suspension System Technician qualification program.

Contents This initial test is an online test designed to assess theoretical knowledge in the following fields:

> Diesel Engines > Gasoline Engines

> Automatic transmissions, manual transmissions, differential and all-wheel drive > Suspension and driving assistance systems

> On-board electrical system management and networking of drivetrain and suspension partial systems

(37)

Department

Powertrain

Title T1490F • Vans • Gasoline Engines • Function, Diagnosis and Repair • Go

> Implement his/her daily work in a more structured and targeted manner Contents Practical and group work focusing on gasoline engines, the design and function of:

> Sensors and actuators in the subsystems > Control unit networking

> Exhaust concept/exhaust treatment

> Fuel, injection and ignition system, e.g. air ducting, fuel high- and low-pressure system > Use of service literature and workshop test equipment

> Diagnostic work with effects and remedies > Diagnoses according to the level model

(38)

Stand 08/2015 38

Department

Powertrain

Title T1491F • Vans • Transmission • Manual and Automatic Transmission, Differential and All-Wheel Drive • Function, Diagnosis and Repair • Go

> Describe the function of the transmissions > Perform test, adjustment and repair work

> Determine the wear of components and define their usability > Flash the control unit and perform SCN coding

> Implement his/her daily work in a more structured and targeted manner Contents Practical exercises and group work on van transmissions:

> Describe the design and function of transmissions > System diagnosis and repair

> Test, adjustment and repair work

> Disassembling the transmission, establishing findings, assembly and adjustment > Flashing the control unit

> SCN coding

> Diagnosis according to the level model

(39)

Department

Powertrain

Title T1493F • Vans • On-Board Electrical System Management and Networking • Drivetrain and Suspension, Function, Diagnosis and Repair • Go

> Describe the design and new features of the on-board electrical systems and the current CAN technology and bus systems, and also describe their basic functions > Describe all variants of data transfer used in the van

> Perform testing and diagnostic work on the battery and alternator management system

> Apply the current category-specific diagnoses and diagnostic aids

> Describe special considerations for the on-board electrical system, the engine and suspension

> Implement his/her daily work in a more structured and targetedmanner Contents The contents cover practical and group work on:

> Overview of overall networking

> On-board electrical system architecture and control unit networking for the engine and suspension

> Networking of engine systems for the current diesel and gasoline engines > Automatic transmission, components of networking

> Assistance systems, components of networking

> Efficient use of networked Star Diagnosis and the DAS, HMS 990 and SD Media programs

> Basic approach to troubleshooting and diagnosis

> Getting started with diagnosis according to the level model

(40)

Stand 08/2015 40

Department

Powertrain

Title T1489F • Vans • Diesel Engines • Function, Diagnosis and Repair • Go

> Implement his/her daily work in a more structured and targeted manner Contents The course covers practical and group work on design and function:

> Sensors and actuators in the subsystems

> Networking of the control units and on-board diagnosis > Exhaust concept/exhaust treatment

> Testing of injection systems and peripheral systems > Use of service literature and workshop test equipment > Diagnostic work with effects and remedies

> Key features of the individual engines > Diagnoses according to the level model

(41)

Department

Service Advisors and Workshop Manager

Title T1502F • Vans • Drivetrain and Suspension • Tips and Tricks, Latest Features and Modifications, Exchange of Experiences for Service Advisors • Go

Target group Service Advisor, Workshop Foreman Objectives The participant can:

> State the operation, functions and system limits of the new driving assistance systems > Describe the new features of the operation of the new telematics generation, steering wheel and touchpad

> State new features and modifications on the vehicle access and drive authorization system and explain customer benefits

> Carry out repair job acceptance in accordance with the manufacturer's specifications Contents > Tips and tricks for the operation of the new V-Class and the Vito

> Function and operation of the new driving assistance systems > Current faults and remedial measures

> Overview of new equipment and retrofits > Exchange of experience

Training Depth Go Method Theorie 30%, Practice70% Duration 1 day (per 8 hours)

(42)

Stand 08/2015 42

Department

Telecommunications

Title T1516F • Passenger Cars • Telematics • E-Class Model Series 213 • Innovations • Run

Target group System Technician Telecommunication Objectives The participant can:

> Explain the structure, function and features of the NTG 5.5 in the E-Class > Explain the control and display concept

> Operate telematics systems of the NTG 5.5 > Systematically assess telematics complaints

> Perform an initial diagnosis and structured troubleshooting > Name and, when necessary, apply telecommunication accessories Contents > NTG 5.5:

- Functions and features - Networking and connections - Control and display concept

> Telematics system operation and settings > Initial assessments of possible complaints > Telecommunications accessories

> "Current telematics topics"

(43)

Department

Telecommunications

Title T1347F • smart • On-Board Electrical System, Telematics and Innovations • Run

Target group System Technician, User IT Systems Objectives The participant can:

> Name the on-board electrical system, as well as the locking and telematics systems on the new smart and name their functions

> Operate the systems in the new smart and explain their operation

> Distinguish between proper system functioning and malfunctions in com